Similar Questions

• Replacement of power supply, model HP Desktop A6200N

  The power supply on my model HP Desktop A6200N died. The power supply provided with the computer is a model electric Delta DPS-250QB-4 A, 250 W output. My question is this, I have another power supply made by HIPRO HP-D3057F3R model with a maximum capacity of 300 W, I can use this HIPRO power supply to replace my old power supply Delta without any complications? Any info would be appreciated, thanks.
  

  HiPro HP-D3057F3R seems to be a power supply HP OEM and should work correctly your desktop HP Pavilion a6200n. Before installing the HiPro in the computer, check the HiPro offers the same connections as the Delta. If necessary to take pictures where all the connectors go you come out of the Delta, so you don't miss any when you reconnect the HiPro.

• HP pavilion elite hpe-035sc: power supply wattage

  Hello

  I have a hp pavilion elite hpe-035sc

  Product number: VS311AA

  I7 870 2.9/8 GB ram/500 GB

  power supply: 460w delta electronics dps-460 DB A (it has a connector 6 power pins)

  I recently added an asus gtx 550 ti and it worked

  I'm worried about the power supply, do you not think that it is enough

  checked the power supply and I found:

  max power: 460w

  power combined 12va + 12vb + 12vc equal to 385 W (it does average?)

  THX

  It should not be any problems with the installation at all. Just do yourself the favor of not not overclocking the card.

  Delta POWER supply has enough good specs for a mainstream card like the one you have installed.

• HP Z400 workstation: upgrade power supply to my Z400

  I have a Z400 I need to improve at all about 850W POWER supply. I tried to install 2 graphics cards worked great for 10 minutes, then slow down to a crawl. I read that 2 GPU crossfire 450W there using owning the stock PSU is 475W I believe, the device must be capable of powering a server MOBO... not sure... Ideas?

  Delta DPS-650 LB B is the best power supply for Z400

  HP P/N 626322-001

  Replacement P/N 626409-001

• Aurora-R4, seeking to upgrade power supply for a better quality of power supply that is not a brand of Dell?

  OK, I have a R4 Aurora, and in my view, that it comes with a power supply of 875 watt. Not 100% about this though. For now, I want to upgrade the power supply to a power supply, so it can support say double cards video in better quality SLI mode. The problem is that the PSU 875 does not have a rail system unique to 12 volts to 50 amps of power support to handle difficult loads of power and provide ample cooling in the power supply. What I would do in the future, it is out of the current PSU, I now and looking to buy a decent POWER supply unit elsewhere. Reference Dell sells a power supply higher than I can use existing wiring, or should I find another brand of PSU and seek to replace the power wiring? And how is it difficult to install if I have to use a different power supply with a different wiring? Installation instructions?

  2015 edit: Joe got his Alien running on an XFX Pro1250 you read, while the mine is running on the twin PSU Seasonic x 1250, here with a case modded haress:

  • The ALX files: a triad of power exchanges. Area-51 Aurora XPS 730 x... How to make a R1.44 of Area 51, using the value of r2 New 1440w Delta... Lessons in exchanging PSU Done Right
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19618380

  I typed my answers below Joe right B4 my Alien arrived last fall & b4 I got much Aurora psu swap knowledge or experience; What follows is an IdeaStorm on how to game-plan & handle swap psu Aurora, with a forum for archives where last year not too many messages in-depth existed on the subject, & Joe here desktop & my own experience of swap, details surface as others have done swaps using the accumulated knowledge we all collection / post in our success stories.

• power supply for Dell PowerEdge SC1430

  How can I order a power supply for Dell PowerEdge SC1430?

  Maintain the NOTE from the ADMINlabel: maintain the label removed by privacy policy >

  Call Dell Firewall 1-800-357-3355 parts and ask for prices and availability of the Dell Reference number. Or simply search the Web for the part number.

  MK463 Delta power 750w
  U9692 Hipro power supply 750w

• all in a single power supply a2010

  Dead power I think, but I need a pinout on the connector 18 tracks. This contribution is expensive to buy a test. The offer number is dps-200-164.

  Thanks for any input

  Brian

  http://www.deltaenergysystems.com/en/support-contact.htm

  Not sure if delta would give this info. YMMV.

  I think the black is ground and yellow + 12V and green is pson, violet + 5V sb, Grey's PWR.

  Maybe it's a GOOD guess, based on the thread colors.

  Cut the cable near the power supply would give you something to work with.

  However, you are just as likely to blow up everything, if you guess wrong.

  Colors are not something that they would waive for manufacturing reasons. So, if you look at this.

  Green is switched on PWR

  Purple is + 5V SBY

  Yellow is + 12V

  Black is GND.

  

  Manufacturer: Reference Dell
  Dell Reference number: GW715 0GW715 CN-0GW715
  Asus reference numbers: 04G185022410DE
  Model number: DPS-200 P-164 HAS
  Compatible models: Dell XPS One A2010 MTG All in one touchscreen desktop PC

  

  

• Inspiron 531 does not completely start upward after replacing the power supply?

  Hey people. This Inspiron 531 since 2007 and he has been a champion for me. In the past months, the power supply fan start getting real loud (intermittently) so I finally looked around and found the same feed Integrator Delta on ebay. Put him in this afternoon very carefully, but while doing the 'blue' cable hard drive that connects to the motherboard is out the motherboard. There are two connections on the motherboard, SATA 0 and SATA 3. I have no idea who it was so I tried it reconnection to SATA 0 (which was blue too) and all turned on. There, I sat on the DELL screen and no full boot. Shut down and tried the SATA 3 connector and basically the same thing has happened although there was some funky boss on the lower part of the screen and still no full boot.

  Any ideas or suggestions?

  Updated - I should also mention this power connectors P4 and P7 were not used until I swapped out.

  And also when I try and start I get the DELL screen that shows the F2 and F12 Boot Menu on the top right of the screen.

  jodeluxe

  The primary C: / SATA HDD, is connected to SATA 0 connector motherboard.

  Are the P1 24 pins and power connectors 4 pin P2, connected to the motherboard?

  Have you tried to remove and reinstall all the memory modules and the power data cables in front and all the readers and motherboard, to see if that makes a difference.

  Check the power LED button reading, is stable blue, flashing blue, Orange fixed, blinking Amber?

  Are there any 'beep', if there is, please publish the sequence of them?

  The Inspiron 531 Manual of use and troubleshooting is here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-531_owner%27s%20manual_en-us.PDF

  Bev.

• G4 MDD power supply Issue

  My MDD was recently stop only two or three minutes after a cold start. The power led lights up, the gray screen with the Apple logo appears with the spinning wheel, but then the machine suddenly loses power as if the power cord was disconnected. These are the things I've already tried:

  1. Removed the PRAM Battery
  2. Disconnected all devices except the keyboard and the monitor
  3. Tried a different power cord

  Start in safe mode did not help. The fans are all running, the red LED lights on the logic board and disk drives seem to work. This could be a power supply issue or a problem with the motherboard and is it possible that I can definitely identify the problem without being able to start the G4? The startup time has been considering more when everything worked last week, would that be a clue? I've owned this machine for more than twelve years and it put to the test so I wonder if it's time to retire him.

  Thanks in advance for any help you can offer!

  Hi, looks a lot like a problem of heat from the CPU, thermal paste is usually good for 5 years or more.

  It runs longer open door?

• 29W power supply will work for iPad 9.7 Pro

  My iPad Pro 9.7 inches provided with a power of 10 watts. It takes about six hours is responsible for the depletion of the layer to be 100% responsible. I would like to be able to do it faster. I noticed that the iPad Pro with a larger screen has a 29 Watt power supply available in the Apple Store. I bought this with the cable Apple to convert USB type C USB 2, which I am connected to my Flash a USB cable.  When I try on my Pro 9.7 inch iPad it charges no faster than six hours. Anyone who has tried using a larger power and they have managed to improve the loading time?

  The smaller iPad Pro does not have lightning speed USB - C compliant connector which has the bigger iPad Pro, so the special USB - C cable and 29W power supply wiil lightning does not work with the smaller iPad Pro to load more quickly.

  Return these back to Apple for a full refund.

  Sorry

• Fan of mid-2010 MP in power supply

  The fan in the power supply of my Mac Pro (mid 2010, OS 10.11.5) began its decent slow in death - intermittent squeaking. I hesitate to pay a few hundred dollars to replace the power supply just when a fan $ 20 will most likely do the trick.

  (1) is that someone can confirm that the fan is replaceable? iFixit.com wasn't much help to answer this question, or for parts. Here's their entry: https://www.ifixit.com/Guide/Mac+Pro+First+Generation+Power+Supply+Unit+Replacem ent/32222

  (2) even in the case that does not know the answer to question (1), I want to give it a shot; can someone point me to a source of parts other than ebay.com, galaxyhp.com or Low End Mac google group? I'm happy to install an after-market fan, unless this is not recommended for a reason any.

  (3) any other suggestions? (If the bearing is not tight, I'm curious to know if I can just pack the her with the fat.)

  Thanks in advance!

  I would try a few drops of Marvel mystery oil, he made fans years beyond their phase of freezing/grinding...

  http://www.marvelmysteryoil.com/index.php

• Power supply on the move...

  What link should I plug my USB 2 plug in my power supply for my MBP 13 '' end 2011...

  None of them. The USB ports on your MacBook Pro are not designed to provide a high current to charge a power supply.

  In case you were keen to use it to power your MacBook Pro, you should know that your MacBook Pro will not charge or run a USB power supply.

• My iMac was bought from China, it runs on 220V power supply, can it be moved to the United States working at 110 V?

  My iMac bought from China, he works with 220V power supply, can it be moved to the United States working at 110 V?

  Electrical and operating requirements

  Voltage: 100-240V AC

  Frequency: 50 Hz to 60 Hz, single phase

  Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)

  Relative humidity: 5 to 95% without condensation

  Operating altitude: tested to 10,000 feet

  of https://www.apple.com/imac/specs/

• Power supply for Powermac MDD

  Hey all,.

  I got a Powermac MDD dead sitting in my room for a few years now that I picked up for free because it lights. I came to the conclusion that it was the power supply, so I took and threw it years. Now, here I am, no power supply and one useless MDD.

  I really want to get this thing to the top and running, but as the price of the power supply on ebay are absolutely ridiculous. I hope that someone here has a job, they are willing to participate with and sell to me. (Pay me for the part + shipping costs). Also interested in an OS disc that will work for the machine, so I can stand him up and running.

  If eBay is too pricing heartburn, try a Mac (MUG) user GFroup in your area. This site will help you locate a:

  http://appleusergroupresources.com/find-a-group/

  As a general rule, you don't have to physically visit the groups for assistance. Several times, simply by sending an e-mail "looking to buy" published groups addresses will receive a response.

  The other option is to look for a private LABEL job and use it for parts. The cost of a scrap computer may be less than the PSU.

• Power supply selection guide

  This MOD can make a post-IT.

  Here is a general guide on how to select a power supply for your HP desktop computer.  The majority of the standard ATX power supply (PSU) must fit in an envelope of HP.  The exception would be a slim casing or the esoteric Merle.

  Looking for a certification 80 + on the PSU to save electricity.  A PC is normally idle or operate at low load 75% of the time.  Therefore, to find a power supply which is more effective in the range 50 - 90W.  A power supply 80 + 350W reaches the level of efficiency of 80% at the exit of 70W (20% of rated output).  The output must be greater than 140W to achieve the same level of efficiency of a PSU of 700W 80 + equivalent.  So choose a power supply that is rated at 25% more than the maximum load of the ACTUAL spending of the rig you will save more of $ on electricity.

  A modern PSU is designed to achieve maximum efficiency between 20 and 80% of the nominal power.  Running a power supply above 80% charge level will result in excessive heat, noise and premature failure.

  A platform Nvidia GeForce GTX 280 (1024 MB of RAM) will rely on 350W max to the wall.  Taking into account the effectiveness of a block of power SUPPLY 80 +, the actual load on the power supply is only 280W (350 x 0.80).  To calculate the required power supply, multiply the actual load by 1.25 (25% margin).  In this case we only need a PSU 350W (280 x 1.25) to run this GPU.

  Let's apply what we know of a rigging of Radeon HD 4870 (512 MB RAM).  290W max to the wall.  Actual load is 290W x 0.80 or 230W.  Now, apply the 25% margin rule and we come to a requirement of 290W PSU (230W x 1.25).  Even if we apply a safety margin of 50%, the power required is always under 350W (230W x 1.50).

  There are no overspec need the power supply by 50%, unless you run your PC up 24/7.  Don't forget that there is a huge variation in the quality of the PSU and side.  Maybe a good 500W PSU is not able to provide as much energy as a quality 350W.  Antec Earthwatts/NeoPower/TruePower and Corsair Seasonic are widely available at several American retailers of quality units.

  High-end power supplies number will need additional power supply PSU in the form of one or two 6/8 pin plug GPU.  You can buy an adapter to convert a molex 4pin to plug 6-pin power of GPUS.

  http://www.TomsHardware.com/reviews/GeForce-Radeon-power, 2122 - 3.html

  Hi Nautsj,

  You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

  1. technical characteristics
  2. the total power - important
  3. amperage 12 + v - important
  4 modular - is not required, but I like the flexibility
  5. guarantee
  6 i7 and SLI ready
  7. energy efficiency
  8 cost
  9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. a single + 12 volt rail is a better choice.

  www.Newegg.com has many choices of power supplies. Corsair, OCZ, Rosewill, Thermaltake...

  The typical EVGA GTX 570 in 9 "long.  The adjacent slot on the PCI-E x 16 slot must be vacant.  Open your PC and do some measures so that you know for sure if the card fits.  According to me, it will fit.

  For what is a PSU, Corsair CX600has very little growth, but the Corsair HX650gives you plenty of space to grow.

  I use the HX650 in two PC.  It is a modular model in order to have better options with the selection of cable.

  "How-to" HP articles should be useful.

  TIP: When installing the power supply, unlock the scanner and slide it forward to facilitate the removal and installation of the new power supply.