Power supply is turned on, but not fans.

Similar Questions

• My printer is turned on but not paper will just slip

  Original title: printer printingmy printer is turned on but not paper will just slip

  printer is on, but does not print

  Hello

  This problem can be caused if the print spooler service is not started or it might not be enough ink in the ink cartridge.

  I would really appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2. What is the brand and model of the printer?

  3. you receive an error code or message?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  5. have you checked for enough ink ink cartridge print?

  Follow the step by step tutorial to help you identify and fix common problems of printer from the link.

   

  Why can I not print? :

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• New... computer power supply begins with 20pin but interrupts when 4 pin is connected

  I read through many of these posts and they were very helpful. I'll try to make this short. I have a HP a1118x who gave me the flashing light feared on the power supply after a recent power outage. Rather than view this forum, I assumed that the PSU was wrong and ordered a new. 480 watt Logisys 20 + 4 pins. Put everything back together and it still won't turn. Then I found myself here all by searching for a solution. Following the advice on another post I disconnected, mother card power and plugged the 20pin record while holding down the power button. Yay, it worked... until I connected pin 4 directly behind the pin 20. Each cut off again thing. No power supply, no nothing. I plugged the video monitor in without the 4 pin and a computer but no video. I guess 4 pins may have something to do with the video. Any advice on what it takes to solve problems?

  This page is available to the motherboard: http://support.hp.com/us-en/document/c00257657

  If food had a connector 24 pin for the motherboard, it should also be a connector 4 separate pins that goes on the plug just behind the 20pin connector.  (do not part of the 20pin + 4pin connectors.   Universal power supply have a 4 pins that will separate from the main connector 20/24 pin to fit an old motherboard like yours) Possily got the two mixed up?   It is to power the CPU, separate from the Grill which is part of the main motherboard connector.   Either that or the CPU/motherboard has failed, too.

• Problems with the DC Power supply QL 355TP: I can not set the tension level

  Hello

  I'm trying to control a power supply DC via GPIB. The power supply being used is the QL355TP of society Thurlby Thandar Instruments (TTi). There are no drivers of OR to control the instruments, then I need to download and install the driver from the website of TTi: the package I installed is as follows:

  "QL - P power supplies, (including QL Series II) series pilot National instruments (Labview and CVI)"

  and I also installed the following:

  "QL - P power supplies (including QL Series II) series, IVI driver"

  So, my problem is that when I try to use the sample application of the driver 'Volts.vi DC Ouput'; defines a specific level voltage, does not work properly. The application gives no error, but it is not set the specific level voltage. However, other functions work properly, as the measure or activate the output. I tried a lot of things, but I don't know why it does not work.

  I enclose the block diagram of the application and the front panel:

  

  

  I must say that I barely control instruments using Labview and is possible that this problem would be because I did not consider things basic and mandatory.

  Any help is appreciated.

  Thank you.

  p.s. Try to replace the decimal comma to period. It is possible that the driver does not correctly handle the comma.

• Upgrade power supply for dell Inspiron 530 (not slim)

  Yes, it's an old computer, but I want to upgrade the power supply for it. Watts, preferably something of 400 or more, but I can settle for 350w or 300w

  I have improved the power supply on an Inspiron 530 with an Antec 550 watt modular power supply with no problems.  Just be sure to buy a power supply of standard size, and you should have no problem.

• Problem Bluetooth: "your Bluetooth Radio is turned on but not detectable."

  Hello

  I've been using a bluetooth mouse with my laptop for over a year, without any problem until a few days ago. I get the error message "your bluetooth radio is turned on but no detectable" in the taskbar, whenever I turn on the mouse and press the blue button that makes it detectable.

  I swapped the batteries for the mouse and set the properties of the Bluetooth Support Services > startup type on properties of Services of Support Bluetooth and auto > Log On "Local System account".

  I tried to turn on Bluetooth settings > Options > "allow Bluetooth devices to find this computer." However, when I apply these settings, I get an error message that says: "an error occurred while Windows saves your settings. The Bluetooth device may be disconnected.

  Can someone help me with this problem?

  Thank you

  Chris

  Question? What computer Dell laptop do you have? A problem on Dell laptops, I discovered is how they have the configuration of the switch without wireless/Bluetooth. What happens when one of the drivers either wireless or Bluetooth out of here that the switch to turn off only turns a large and not the other. What I would say to do is to uninstall your Bluetooth drivers then reinstall the driver from Dell. Make sure that during the uninstallation of turn show devices hidden in Device Manager so you can see all the blue tooth on your system devices. Reinstall after rebooting the computer and make sure that the switch is turned on; After restarting, try to reinstall your Bluetooth devices and see if there detectable.

  Let me Know

• Modem is turned on but not Internet

  Original title: ADSL modem

  Hello

  the ADSL modem is in my computer turns on but mycomputer is not connected to the internal

  How to set up

  Thank you

  Hello

  Thanks for posting your query to the Microsoft forum.

  I understand that you are facing problems with your internet connection, I will definitely help you with this problem.

  I would like to know;

  1. What is the brand and model of your computer?
  2. Do you receive an error message/code when connecting to internet?

  This issue could result due to these reasons:

  • This problem may occur if you already have an active broadband connection.

  • This problem may occur when another device with a driver that is not compatible with Windows 7 is in conflict with the modem.

  Please try these methods below and check the status of the issue.

  Method 1: run it Network troubleshooting.

  Try to run the Network Troubleshooter that can help you solve the problems with the internet connection.

  Using the troubleshooter from network in Windows 7

  If the problem persists, follow method 2.

  Method 2: Remove and re-create the wireless network connection.

  To remove and re-create the wireless network connection, follow these steps:

  1. Press the Windows key on the keyboard > type ncpa.cpl , and then press on ENTRY.
  2. Right-click your wireless network connection and then click Properties
  3. Click the wireless networks tab.
  4. Under preferred networks, click your wireless network, and then click Remove
  5. Click view wireless networks.
  6. Under the management of the network, click Refresh network list.
  7. Under Choose a wireless network, click the wireless network to which you want to connect, and then click on connect.

  If the problem persists, follow method 3.

  I suggest you follow the procedure described in the given Microsoft help articles below:

  Wireless and wired network problems

  How can I troubleshoot network card?

  Additional information:

  Why can't I connect to the Internet?

  Please post back with the results and the information requested, we will be happy to help you further.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Compaq Presario turns on but not start

  Product: HP Compaq Presario
  Model: SR5250NX
  OS: Windows Vista

  Symptoms: When you press the power button, all the lights come on as expected. However, a slight popping noise that sounds as if it is coming from the hard drive will ensue. The monitor, mouse and keyboard are not recognized despite being plugged in, even if the speakers are always lit. It is a problem, I am back after a journey of four days out of town, and I heard the internal fans speed up just from time to time for months. I guess this thing is fried, but I hope it can be fixed. Thank you.

  This

  http://support.HP.com/us-en/document/c01443366

  says 1 blink = bad processor. Sorry Charlie, I'd scrap it.

• 3000 - X 11: button / stop turns off but not on!

  It's true!

  I have a 3000 - X 11 and the only way to start is with the switch of CD/DVD/Media Player - pressing the power button does nothing.

  When the machine is turned on, you CAN press the power button and the machine will be turned off...

  Any thoughts and pointers would be really appreciated.

  Thank you very much

  Lee

  Hello

  It is a strange question. I m not 100% sure what the problem may be. Maybe it s has the motherboard or other for lack of material. I recommend contacting the Toshiba service partner because has more experience with these cases of hardware failure.
  On the Toshiba site, you will find an ASP that is responsible for your country.

  Good bye

• E7440 latitude: Wake-on-Lan works when the laptop is turned off, but not when it's put into hibernation

  I have a Latitude E7440 running a clean install of Windows 10. If the computer has been stopped, I can use a Wake - On - Lan Magic Packet to the MAC address of the Ethernet port (as described here) to turn the computer back on. But if the computer is in hibernation, it does not work.

  Probably, it is that when the computer is in hibernation the link on my switch light is off, but when it is stopped, the link light is on.

  So my question is: How can I get this phone to maintain the LAN port when hibernation, in the same way on shutdown? Thanks in advance.

  smammy,

  Click on the link below for a possible resolution following on problem of your computer network settings.

  How do I enable Wake on Lan on Windows 10

• Turn off but not to connect to the Adobe servers

  I want to improve my OS on my desktop and need to disable PS CS4 before I format the drive, but when I try to disable the PS 'Unable to connect to the Adobe servers' answers which is strange, since I have internet connection and can surf here and write this in forums Adobe

  I also disabled the firewall but no change.

  How to solve this?

  / Jens

  Did the upgrade and re-installed PS and it worked fine

  Seems fair, you can go ahead and do not need to disable anything.

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• Aurora-R4, seeking to upgrade power supply for a better quality of power supply that is not a brand of Dell?

  OK, I have a R4 Aurora, and in my view, that it comes with a power supply of 875 watt. Not 100% about this though. For now, I want to upgrade the power supply to a power supply, so it can support say double cards video in better quality SLI mode. The problem is that the PSU 875 does not have a rail system unique to 12 volts to 50 amps of power support to handle difficult loads of power and provide ample cooling in the power supply. What I would do in the future, it is out of the current PSU, I now and looking to buy a decent POWER supply unit elsewhere. Reference Dell sells a power supply higher than I can use existing wiring, or should I find another brand of PSU and seek to replace the power wiring? And how is it difficult to install if I have to use a different power supply with a different wiring? Installation instructions?

  2015 edit: Joe got his Alien running on an XFX Pro1250 you read, while the mine is running on the twin PSU Seasonic x 1250, here with a case modded haress:

  • The ALX files: a triad of power exchanges. Area-51 Aurora XPS 730 x... How to make a R1.44 of Area 51, using the value of r2 New 1440w Delta... Lessons in exchanging PSU Done Right
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19618380

  I typed my answers below Joe right B4 my Alien arrived last fall & b4 I got much Aurora psu swap knowledge or experience; What follows is an IdeaStorm on how to game-plan & handle swap psu Aurora, with a forum for archives where last year not too many messages in-depth existed on the subject, & Joe here desktop & my own experience of swap, details surface as others have done swaps using the accumulated knowledge we all collection / post in our success stories.

• USB port is powered but not working

  Hey guys,.

  One of my usb ports decided to stop working properly, I am still able to use devices that ONLY require a power supply, one example being my external fan that works very well in this port.

  However, I'm unable to use my mouse or any storage device in the port.

  The lights (as appropriate) on the devices will be turn on as normal but will not do much than that.

  I did not major changes since the last time that the port has been used successfully, it has just stopped working.

  I rebooted several times and the problem persists.

  All the other usb ports of normal work, no problem.

  Data sheet:

  Pavilion DV6-7029TX

  Running 64-bit Windows 8 Pro

  All up to date with windows updates

  If any other information is needed please let me know.

  I'd appreciate any help someone can provide to help me get to the bottom of this.

  See you soon.

  -Brendan - Hello,

  I think we should ALL drivers. The Chipset drivers are the drivers for your motherboard and other drivers for individual embedded devices. I think we should do your Chipset Drivers first, and then the pilots on your side. Like building a House we ensure that the Foundation is solid before adding home on top. What I would like to is to download and install ALL the drivers from the HP Pavilion dv6-7029tx Entertainment Notebook PC Drivers page. Make sure that you download and install the drivers for the Chipset first, after that is not matter which order you install the drivers.

  Please re-post with the results on one of the threads that you have on the go. Thanks for posting on the HP Forums. Have a great day!

• Power supply orientation

  I had to order a power supply Antec Earthwatts 650, but have recently found photos online, and it does not appear that the device has a power outlet 120v male on the same as the cooling fan! This device is listed as an adequate computing power, but each turn computer I've ever seen has a (male 110-120 v) entrance near fan cooling at the rear of the unit.  Anyone WHO is familiar with this specific power... and give me a quick answer, so maybe I can cancel my order if necessary!

  Morrismornic wrote:

  I had to order a power supply Antec Earthwatts 650, but have recently found photos online, and it does not appear that the device has a power outlet 120v male on the same as the cooling fan! This device is listed as an adequate computing power, but each turn computer I've ever seen has a (male 110-120 v) entrance near fan cooling at the rear of the unit.  Anyone WHO is familiar with this specific power... and give me a quick answer, so maybe I can cancel my order if necessary!

  The Antec Earthwatts 650 has a standard configuration. The end where the switch has a grill and a male connector.

  

  It is as usual as the power supply gets.

  Best regards
  ERICO