Power supply replacement for Equium A60

Similar Questions

• HP HPE Phoenix H9 - 1215t: power supply replacement for my desktop HP HPE Phoenix H9 - 1215t; Intel Core i7-3770

  My power supply is continuous and had to replace it.  DO the Corsair CX750 - 80 PLUS® Bronze Certified Power Supply CP-9020015-NA or CX600 - 80 PLUS® Bronze Certified Power Supply CP-9020048-NA have the connections required for work with my RESUME?  Can I upgrade to 750 or stay with a 600?

  Thank you

  J

  The Corsair CX600 is an exact fit and has the necessary wiring.  It is not easy to try to adapt the lengthy backup more.

• Power supply replacement for Acer Aspire x 1800 desktop mini

  I need help to identify what supplies I can get to replace the rather noisy in there.

  Also, if anyone knows about the actual model and details of one that comes with (pines, watts, efficiency) that would be appreciated.

  Once I bought a replacement and it didn't fit because of the very compact housing.

  Thanks in advance.

  Well, in regards to the power, I think that a 220 watt power supply will do. Regarding the size, if you live in America, I take to Tiger Direct and let them help you. They are very friendly and intelligent. Help most basic is free. It wouldn't hurt.

  They carry several alternative energy supplies. They wear very probably one you need.

  After checking, it looks like the power you need.

  http://www.eBay.com/ITM/new-genuine-Acer-Aspire-X1700-X1800-X1900-X1920-X3100-X3200-power-supply-220...

  Here is the link where I got most of the info:

  http://www.CNET.com/products/Acer-Aspire-x1800-u9002-core-2-Quad-Q8300-2-5-GHz-4-GB-750-GB/specs/

  Most of the supplies are about the same size. But I can't say its size for a mini.

  But again, you could call Acer for most of the information you need.

  CoolJoe

• Power supply replacement for k450

  Hello
  You just bought a new idea Center k450 and blew the power supply while connecting to the power source. Here, my voltage is 220-240 and I plugged in while it is on 115volts. Where can I get a spare part for the please my machine?
  Thank you

  Hi Axeenah,

  Lenovo's share sale has changed you will need to call this number

  (877) 453-6686 Lenovo part sale

  and order this part number

  36200498 PC6001-EL9G ATX 280W 400WATTS POWER supply

  Let us know where to send them less.

  Hope this helps

  See you soon!

• Need a new mothherboard for Equium A60

  I tried suggestion given in the forum but I am always sick, I think I need a new mothherboard for Equium A60, I searched on the Toshiba site but tere does'nt seem to be links or place where it is said you can buy a home, HELP!

  As much as I know, that you cannot order parts for laptop direct from Toshiba.

  You can do this in some independent electronic store, perhaps by approved maintainer Toshiba or on eBay. I recommend you check out eBay. Here you can find many hardware components for various Toshiba laptops.
  With a little luck you can find mainboard for your model of laptop also.

  Check it out.

• Replacement of the hard disk for Equium A60-155

  I need to replace the hard drive in my equium A60-155. I need to know what is compatible with this model and if the brand of the drive is important in compatibility. For example should be a drive hard toshiba or is it possible to others.

  Any help would be greatly appreciated.

  Hello

  You n t need to install a HDD in particular of Toshiba. You can also use disk of another company.

  It is important that you use a HARD drive with support for hardware specifications.

  I found these useful discussions on the replacement of the HDD on the Satellite and Equium A60:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23770&MessageID=87207
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22183&MessageID=81930

  Satellite A60 is very similar to the A60 Equium and so the two series use the same hard disks

• Need battery for Equium A60-181

  I'm after a new battery for my notebook equium a60-181.
  The mounted battery is a PA3384U-1BRS.
  I looked on the toshiba web site and cannot find this model.
  As he was replaced by another model, if yes what a number of battery should I look for.

  Hello, my friend. I see you are new in the forum. Welcome ;)

  Now to your question:
  You can order all the compatible parts and ASP support in your country. I think that guys order it directly from the Toshiba.
  Anyway, the European Toshiba site contains a beautiful site on the options and accessories.
  You will find lots of devices and parts which are included in the different categories and are compatible with Toshiba laptops.

  Check it out

• Pavilion HPE-310 t Power Supply replacement - please help!

  OK, so I have a Pavilion HPE-310 t, (MS-7613 (Iona-GL8E) motherboard) and I want to replace the original PSU (300 watt) for a 500 watt so I can install a better video card. I looked at the harness and they look like I can put in a general diet something like this:

  http://www.Walmart.com/IP/13812566?adid=22222222227000381035&wmlspartner=wlpa&wl0=&WL1=g&WL2=&WL3=13...

  If im wondering if the gneral supplies will fix the case... Thank you very much

  Yes, the Thermaltake TR2 500W ATX12V power supply you linked to should fit in your computer case. Also consider the Corsair CX500 and CX600. Two of these power supplies are highly recommended and are known to fit in many cases of HP computer.

• Power supply upgrade for my Dell XPS 8100?

  I'm looking to upgrade my Dell XPS 8100 power OEM 350W at a minimum 550W power supply so I can install a Blu - Ray reader & writer drive, & so I can replace the ATi Radeon HD 5570 1 GB GDRR5 graphics card with 2 GB or 4 GB of GDDR5. What would be a good power supply for my computer?

  Here are my specs:

  Intel Core i7-870,

  16 GB of DDR3 Ram(was 8GB but I upgraded to 16GB),

  HD 1.5 TB,

  ATi Radeon HD 5570 1 GB GDDR5.

  In addition, this card will work fine with my computer:

  

  & What will be a good Blu - Ray burner for my computer which is not too expensive?

  It's my computer right now:

  

  Here's a post that details what the size fits:

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19483753

  But...

  740 GT is not much faster that the Radeon 5570 then this isn't much of an upgrade. What do you who needs 4 GB of RAM - V?

  Have you watched a 4 GB GTX 750 ti? Much faster...

  www.newegg.com/.../Product.aspx

  If you go with a GT 740, according to me, he can use less energy than the 5570, and if you buy a 'green' BluRay burner, it can use less energy than your current optical drive.

  http://www.Newegg.com/product/product.aspx?item=N82E16827135252

• M9340F power supply replacement

  I replaced the power supply on my M9340F. I have the replacement, he is doing very well. However, I have 2 questions:

  1. I have to remove the DVD drive in order to to fix the power supply to the memory card reader device. However, I can't get the DVD player in the Bay! I undid the clasp on the side, but only allows me to drag on about 1 inch. There's something else blocking its removal, and I don't see what it is. I only removed one side (if you look at the front pc system unit, the right side is removed). I attempted to try and remove the front plate before, but I was afraid I would break something, so I stopped.

  2. at some point, the HP media drive USB connector became one. I see several USB connections on the motherboard (01 USB, USB 02, etc.), and the connector appears to each of them. One that I re - attach to does it matter?

  Thank you.

  Hello bassman592, to remove the DVD drive, you will need to remove the front panel. It is very easy to do, but should be done with care. The bezel has three clips for fixing plastic on the side of the case open. Just lift those stars very lightly just enough to unlock them and then rotate the bezel to the left, as if it were a hinge to the other side. The other side has 3 plastic clips attached to the bezel. Once the bezel has reached the other side, the front will detach. To remove the DVD disc, you need to unlock the mount and the DVD player will slide enough before you unplug the sata data cable and the power cable.  Then, the DVD player will come offered free of the case. You should be able to access the reader at this point. Reassemble in reverse.

• Drive recovery for Equium A60-157 PSA67E

  Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

  I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

  I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

  So can you help me please...

  David

  Hello

  Why you n t install a new Windows OS on this laptop?
  Missing drivers can be downloaded from the page of European driver of Toshiba.
  All drivers are available!

  The recovery disc can be ordered for this model of laptop because it s too old.
  Clean install OS Win + drivers is therefore the only option

• HP ENVY Phoenix 850-065se: HP ENVY Phoenix 850-065se Power Supply replacement Question

  On point to start using my new 850se and, like others, have long-term supply concerns with the unit from 500W to come with this model. Finally the PSU will have to be dealt with during the upgrade or this power will die quickly.  I thought I could just install a Modular 750W Cool Master PSU I have to just to fix the problem from the outset for the life of the platform. I jumped open the case and power supply cables was moving to look at and check the PSU is actually 500W (it is).

  At first glance, everything in the 850se looks compact and compatible with a new PSU standard - then something cought my eye. Someone else saw the connector connecting the power supply that connects in the CD player? I'm not some tech pro by any means, but I'm not completely new at this stuff, and for the life of me I can't understand what is the connector. I am confused where I am fearful that it's some exclusive HP nonsense. I have never seen him and can not find maps while rummaging around looking. My only thought was there must be an adapter for the FDD or the 4 pin connector. I hope it is something simple that, for some reason, I just never saw.

  If it's something completely owner, then I guess I can go along without the cd player. It's not like I need for what these days - but would of course I would powered it so it is an option.

  Help at all or guidance would be greatly appreciated. Specs below:

  Kupchr36, welcome to the forum.

  The PSU is ATX standard.  You should be able to update without any problem.  However, until you decide to upgrade the video card, it should work fine.  There is a lot of power for OEM components.  Personally, I love the Corsair products.  They are lovers of quality at a reasonable price.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Where to find the recovery for Equium A60 CD

  I recently bought a laptop Equium A60 but the seller didn't have the recovery CD or other CD that comes with it.

  Could someone tell me where I can get a copy please?

  Thanks in advance!

  Hello

  I think that it is a question more. And the answer is;

  . Contact the ASP in your country for a new Toshiba Recovery CD.

  By the way; You should first check the forum for a similar question because like I said above; It is a question asked. This has been posted 10,000 times here in the forum ;)

  Good bye

• Graphic 3D MathCad for Equium A60 problem

  Hi all

  I have problems with Mathcad MCad (2001 - 12 Mcad) work on Equium A60. After trying to do any kind of 3D terrain (land surface, for example) Mathcad crashes. This problem is only on my laptop. How can I solve this problem?
  Marina

  Hello Marina.

  Well, I put t have ideas why you machine has had problems with this software, but first of all, you should try to update the graphics driver. If the problem of images fixed the same, so you should contact the manufacturers of MathCAD. Maybe they got patches. I found this site: http://www.mathsoft.com/services/technical_support/

  Good bye

• Graphic update for Equium A60

  Hi all!
  I'm new to this so you do not laugh too if my question is stupid! I have a laptop of equium A60-155 with graphic 64 MB built in, is it possible to upgrade to 128 MB or higher at all? I got different answers from different people so wanted to know once and for all, & that seems to be the place to do it. Thank you for your help in advance. Craig

  Hi Craig,.

  As you probably can see, your graphics card sharing his RAM with your CPU. This is controlled by a setting in your BIOS (titled "UMA" if I remember correctly).

  Go into the settings of the BIOS you look for this setting. If it is selectable (it is in my Phoenix BIOS on my A30), then you should see a pop window displaying a range of contexts usually 32 MB, 64Mb (default) and 128 MB.

  Obviously if you assign ity 128 MB, this will reduce the RAM remains available because it is shared.

  HTH