PowerBook G4 1.67 GHZ of aluminium battery "Do not load"

The status of the battery in the menu bar indicates "no charge".  Apple says that it is because the power is strong enough to power the computer but not the battery help.  However, I am using OEM rated power 65W 24.5V out, have you checked the voltage output and is OK.  What else might not work?

The battery may be past its limit load cycle, so it must be replaced.

Tags: Notebooks

Similar Questions

  • My battery does not load after my Vista laptop off for 3 months

    my battery does not load after having my laptop for 3 months

    * original title - after a 3 month vacation my battery not charging *.

    Hi jimycaan,

    1. How are the battery once the power is discharged?

    2. what happens when you try to connect the laptop to the main supply and work on it?

    You can update the BIOS and see if the problem is resolved. Follow the steps mentioned in the article below.

    BIOS: Frequently asked questions

    Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    You can also consult the following link for more information:

    Solve battery problems

    Hope this information is useful.

  • Is there a settings in Win7/HP have that battery does not load until it is less than 95%

    I just bought a HP Pavilion dv6 - 7043cl laptop and have noticed that the battery does not load unless it is less than 95%.  I am very concercerned because I had one cell different from another company where I had battery problems.  That the manufacturer was not helpful, and I will never buy their share again.

    I heard good things about HP, that's why I decided to buy this particular machine.  However, I've only had this machine for 3 days and now it begins.  I can't find a Win 7 (I'm under Win 7 home Premium 64-bit) setting that controls when the battery starts to charge.  It is a function of the HP Power Manager?  Is this a feature of the ships with their computers HP laptop battery?  Or is it that indicates a problem with this machine?   I am a student and I need a reliable laptop for school.

    Any information you can provide is greatly appreciated.

    Thank you

    HanNan

    Hello

    This feature is intended by design to reduce unnecessary charge/recharge cycles - reference for this lie in the 5th paragraph in the document below.

    http://support.HP.com/us-en/document/c00287805

    Kind regards

    DP - K

  • MacBook Air battery does not load after resetting SMC

    Hi all, hope you can help me with this. My model of Macbook Air early 2014 seems to have some problems with its battery. The battery status says "do not load" and it is stuck at 74%. My charger light is still red and I tried to check the status of the battery, it is said to be normal; also I have reset the SMC and all that stuff that is suggested on the discussion Forum, but still it is of no use. Someone had a similar problem before?

    Try resetting the SMC two times more.

    If this does not help, please contact Apple support.

    https://support.Apple.com/contact

  • Equium L20 battery does not load

    I have an Equium L20 what battery does not charge. The Windows Powermanagment says he is in charge, but the percentage increases ever, I tried different batteries with the same symptom as a result.
    Battery LED is orange glowing as if his load but no matter how long I leave it on charge, percentage does not change. Windows detects the battery as well with all the correct information... I tried to remove the battery, to no avail. .
    Is it a software or a hardware problem?

    Published by: ADMIN on June 7, 2008 08:12

    Hello

    I also believe that it is hardware problem. There must be some problem with electronic power electronic board. Particular component? This component is placed on the motherboard, and I don't really know if you can exchange it separately.

  • Laptop battery does not load when it is plugged

    I plug in charger and battery will not charge upward. Bought the new charger and still does not. Labtop not one year. It's aspire one.

    References to Vista also apply to Windows 7.

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    Acer - USA - Service and Support - drivers
    http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

    Acer - worldwide
    http://www.Acer.com/worldwide/selection.html

    =================================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    =================================================================

    Other information that might help:

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Battery meter: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

    Battery saver
    http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

    Solutions to common battery problems
    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

    What is the precise the battery meter?
    http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

    ============================================================

    Try this - to make a Restore Point

    How to create a System Restore Point in Windows 7
    http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
    who will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

  • Laptop battery does not load fully

    I replaced battery week & last with a new original Toshiba battery when first start morning computer, it does not load, but not discharge does not, either.  The battery was working fine, but he is 7 years old.  I discovered that if I unplug the charger for a few minutes & plug it back, it will charge up to 100%.

    When I first use in the morning, the charging light lights NOT at all & when you check the battery icon in the notification bar, it can say something like 97% charged and not charging.

    This is Madam.

    Event ID #7036 (Service Control Manager) - is it classified as information or error?

    Remove the battery and reinsert to ensure it is snugly in place. He could loose.

    Download (free) BatteryCare to monitor the battery

    http://batterycare.NET/en/index.html

    Perhaps the battery is to give a false reading.  You have Toshiba Power Saver Tool?

    Look in the Windows Event Viewer > system log

    Are there listed errors that are related to the stop?

    Check your power cord.  Make sure it is nice and warm.  Check your power strip if you have to determine is not surging or short-circuit.

  • Dell Inspiron 11 3147 battery "Do not load"

    This new Dell Inspiron 11 3147 just arrived today.

    The power adapter is "connected", but the battery is "not supported."

    I looked everywhere for help for this, the Dell Diagnostics found no problem and I've struggled to get a hold of customer service. The idea most commonly recommended is to uninstall and reinstall the driver ACPI Microsoft NER method exactly, what I did.

    The only thing I have not messed with is the battery itself, which does not seem to be accessible without damaging the back, which is screwed and secure well.

    No idea what is the problem?

    Update from my post below:

    A day later, after the battery fully charged and all was fine, I come back and it's back to the message "plugged in, not charging." I could see if flashing the bios and rebooting will work again.

    My original post on December 8, 2014:

    I had this problem until this morning. In short, I have updated the bios to Version A03, A03 (released December 2, 2014). Before that, I did all the googling and messing everything without success. Here's what to do:

    1. run "my Dell. You can access it by type Ctrl-Esc and then type in "My Dell" and clicking on the "My Dell" icon that appears.

    2. click on the Green Panel "Drivers and updates. This should open a window for product support browser.

    3. scroll down under article which said that "these drivers matching your selections" and click on the arrow next to "Bios".

    4. click on 'Download file '. Please close all applications and run the file and follow the prompts. It will restart for you at the end and the problem should be solved.

    Good luck!

    Ben

    Version A03, A03

  • BlackBerry completely exhausted Z10 battery does not load when 10 BlackBerry smartphone is connected to the charger or usb

    Hello

    I have a BB Z10, two days ago, while the travel battery got completely exhausted and the phone got turned off. later, I connected to the BB charger and the phone does not charge, I tried to connect it to the USB, but it does still not load... just a constant red light nod. I tried to remove the battery for 2 hours and back and not luck it is plugged. Like I need my phone works, I tried to go to a service center but not able to locate one on the BB site, I bought a new
    BB Z10 battery and it worked fine. I went back to my place and it took about an hour for me and yet once again, the battery discharged and I am with the same problem now. Now, when I connect my Z10 to the computer (windows 8.1) I get a red + green slow light flashing and after say 20 minutes, it connects to the computer and the phone turns... and when I see the phone it says Exiting battery saving mode"" immediately followed by "turning off the appliance" and it loops constantly. "

    Help, please!

    It's weird, but not the first time I heard of this.

    See this: http://www.blackberry.com/btsc/KB36747

  • BlackBerry Smartphones 8830 battery does not load

    8830 does not load even after 12 hours of charging.  I can't find new battery in any store, I tried Verizon, Best Buy and Radio Shack.  Any ideas?

    I saw at BestBuy, maybe not your battery.

    You can buy another battery to another carrier, Tmobile or ATT as well.

    Get the 88XX - green (lime) (C - X_2) - 900mAh<--is that="" the="" color="" of="" your="" present="">

  • MacBook Pro battery does not load

    Hi, I recently bought a NuPower OWC battery. I installed it in my MBP 13 ". It works great the first few days. I performed the cycle of charge/discharge, then noticed the other day when the use of my MBP and I plugged in the charger, when I clicked on the symbol of the battery it says "battery: no charge. I turned it off, and then after a while the light from GREEN to ORANGE charger. I loaded all night. Then the next day, same thing happen. "Battery: no current charging", but when I turned it off, it has been 2 hours since plugged in charger GREEN light does not change to AMBER. Is it possible that the battery is faulty?

    eannbelan,

    Try a Reset of the SCM: http://support.apple.com/kb/HT3964

    You can also try an Apple Hardware Test n: https://support.apple.com/en-us/HT201257

  • Battery does not load after update

    I have a MacBook Pro end of 2011 and just installed El Capitan. Since then, he has worked super slow. I've upgraded to version 10.11.4 yesterday, hoping that to solve some problems. Now it does not recognize my MagSafe adapter, and it does not charge. I did a reset SMC, but nothing happened. Before the issue of the battery, my screen was black when you start the computer. I did a reset of the PRAM, and it worked. I was stupid and never sustained up to my computer because I don't have an external hard drive. My battery percentage is very low and I have no idea what to do! Help, please...

    Unfortunately timed but you can have reached the point of battery failure.   If you have an Apple store near you, make an appointment and bring in assessment.   I'm sure you'll learn to save more often

  • L850 - 1 5 satellite replacement battery - do not load and not detected!

    Hi, I recently bought a replacement battery for my Satellite L850 - 1 5 as the stock battery was fried. The stock battery couldn't hold a full charge for more than 10 minutes.

    The replacement battery fits perfectly into the battery compartment, but the laptop does not light when the battery is in. It is not even turn on if I plug the charger ONCE I insert the new battery.

    Basically this new battery does any record with the laptop, it won't load or anything... Is it possible that it's just a battery of spleen?

    Any advice or help is massively appreciated!

    Thank you

    > It is not even turn on if I plug the charger ONCE I insert the new battery.

    In my opinion the new battery isn't fully compatible.
    Probably its a cheap Chinese product and not genuine battery out for the L850 series.

    I have no other recommendation for you than buying new, authentic and fully compatible battery.

    The battery 6 Toshiba PA5024U-1BRS (and PABAS260) must be compatible.

  • Satellite P20-404 Pro battery does not load

    Installed battery. The energy capacity Manager shows 0%.
    After 2 days of loading there are no Kampala. What's not here?
    The battery is a PA3291. How can I test the function? Thanks in advance!

    Hello

    just a few questions: is it a new battery and if so why you change the batteries. have you met the same error before and how long the problem exists.

    A little tip: sometimes it helps 'resettlement' battery, just so to remove it and insert it into your device. Maybe it works...

    Would appreciate comments on your part.

    See you soon

  • Spare battery does not load

    Hello

    As my laptop battery died, I bought a replacement battery for Toshiba A300 - 16L, but the battery won't charge at all. My laptop says "plugged in, not supported. When I put the original battery, it says "plugged in, in charge.
    I don't know if the problem is the battery, the power adapter or the laptop...
    The adapter works correctly because my laptop remains on when I remove the battery.
    If someone could help me, it would be nice...
    Thank you!

    Hello

    The number of threads that you want to start with the same question?
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=62018

    It would be preferable to continue the discussion on your original thread

Maybe you are looking for

  • How can I check if the 5s iPhone that I bought is the true Apple product

    How can I check if the 5s iPhone that I bought is an authentic product of Apple. I need the site link sea that allows me to enter the serial number and can check it please.

  • OfficeJet Pro 8210: network capabilities are not available.

    Hi, I have been setting up the printer above but I need to put in place on a network. I don't have the network option as it says "network capabilities are not available. When I print the network configuration page, it says network capacities have bee

  • 4500e ENVY: ENVY of 4500 he "sleep" mode?

    The manual of my DESIRE to 4500e is fairly brief. It goes in mode 'sleep' if I leave it on? My Office Jet 932C would not have to be turned on to be able to print. It is automatically activated when he got a print job. It is sent wireless jobs, but I

  • Don't want to use my flash as a slave.

    I want to use my 430 ex ii on my Canon 7 d mk ii, can I disable my popup flash forever?

  • LaserJet 1300 driver for Win7 problem

    Plugged my Laserjet 1300 in my new computer (System 7) via USB - and Windows could not find the right driver for it. I cancelled Windows trying to install driver automatically and put the original driver CD disc (Serial #Q1334-60107 ver 2.0) in drive