PowerConnect 5324 default factory reset

Similar Questions

• T510 default factory reset

  I need to reset a T510 to factory default because he doesn't know the administrator password. I tried various passwords by default, but none of those who work. I don't see an option, reset. Does anyone know how to reset to factory default?

  Please try these steps again this could help you this time:

  1. download the file of the operating system

  2. right click on the file and select "Run as Administrator" [this step is not in the manual]

  3. now, select "Format USB" under deployment options

  4. Select the USB in the list, with the top and down arrows to display the drive letter correct.

  (If the USB does not appear in the list, click on update readers, then scroll down again).

  NOTE: In the next step, the USB drive is reformatted and all data thereon is erased before starting

  image is copied into it. To avoid data loss, make sure you have saved all data from the USB

  on another drive.

  5. click on Format to wait until it finishes formatting

  6. remove the Bootable Flash drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  "I work for Hewlett-Packard.

  Click on the 'Purple Thumbs Up icon in the lower right corner of a post' to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Kind regards

  K N R K

• Totally to the U410 - the default factory reset format?

  Thing, is that I bought this IdeaPad U410 about two months and less than a month has just decided to format and install Ubuntu, because I didn't like Windows 8. But, as I should be, since that day my life has become a hell of bugs and incompatibility issues. I just could not afford it and decided to returned to the Microsoft Team.

  I had all my Lenovo and WinRecovery partitions intact. Then, I tried these always

  -Use the key to recovery, to restart the plant; somehow, his right boot Ubuntu.

  -Use my flash driver with the system recovery of Windows 8, but he says it's "impossible to reset your PC. A partition of required driver is missing. "

  In a desperate approach I followed a few steps to eightforums and by using diskpart I completely erased my HD (after make a backup of the Lenovo and WinRecovery partitions) - and... It did not work. Now, I am lying here with a computer without operating system or data.

  Yes, I'm a genius. Have I not hope to solve it (recovery of factory default) or better start to use the laptop as the most expensive paper weight ever?

  Hello

  Well, before you do that I realized that I had nothing to lose and wipe all my hard drivers (the SSD and HARD drive) using the command prompt of Windows 8 recovery system via USB. I still couldn't install W8, but later I tryied Ubuntu 12.10 and now it has worked flawlessly.

  I do not recommend this because I don't know if in the future this can be a real headache for me, but now, it is perfect and, in addition to the installation of the graphics card, I have no problem.

  In any case, thanks Pascal, I'll keep your suggestion and if necessary I'll contact lenovo support.

  Detective Conan!

• PIX default factory reset (activation key problem)

  Hi all

  I have a question about cisco pix firewall. If I reset the aquise pix firewall by default then I have to activate again your allowed or not? I mean I have to re-enter the activation key or not.

  Hi sandeep,

  I met a key question of activation when changed the IOS, but have never seen a factory defects cause this. If you worry about it, question sh ver and write down your activation key, where he asks.

  Concerning

• Default factory reset blackBerry smartphones

  Well, I saw all the answers to how do.  But if I reset it. because I intend to give it to someone else, he will still be able use? It will be just destroy my stuff right?

  and reset the passwords before I to a computer Pocket wipe?
  Thank you.

  Read this article from RIM's Knowledge Base to reset your device to factory settings.
  KB18998 How to reset a factory default BlackBerry smartphone

• OfficeJet 4610 - default factory reset - change the language from Chinese to English.

  Hello

  Please be kind - I am a dead set on this HP forum newbie.

  Have an OfficeJet 4610. While the implementation, accidentally selected Chinese (foolishly).

  There is no question 'Do you really do this?', and if the printer is then configured in Chinese.

  Now I'm wanting to change it to English. Easy? Not so so.

  He spent more than two hours solid Googling for 4610 or 4620 with each change the language in English or do a reset on the printer. So far, nothing--other than a single page on the site HP 4610, who says to select option 5, maintenance, option 2 then select the language of your choice. That's fine, but my options are 8 languages still in Chinese... And I can't read Chinese. What are the characters of 'ENGLISH' in Chinese?

  Also found another thread on reset the 4620 in these forums, but everyone wants to do private messages.

  Download the guide of the user - all 288 something pages specify not at all on what happens if this scenario occurs.

  -This is, is that 8 list items is 'English' to the option 'change language'?, or, how to do a reset on the 4610, so I can start this brand new as if I were pulling out of the box.

  Thanks in advance for any information.

  / Dave.

  Hello

  Thanks heaps for the answer.

  Many apologies for my rants. I should not have written that. (If I can I might change it)

  Just pure frustration.

  In any case, it turns out that the manual and the other thread of HP is correct in the menu structure. Which caused more frustration.

  Told to go to the menu menu 2 then 5.

  It turns out that it's 4 menu then menu 2.

  Thank you.

• PowerConnect 5324: esoteric cabalistic

  Hello everybody,
  
  I got a Dell PowerConnect 5324 switch and I try to manage it.
  

  I connect it to a computer with a null modem cable and I run PuTTY 0.62. I set options to :
  

  • Connection: serial
  • Speed: 9600
  • Data bits: 8
  • Stop bits: 1
  • Parity: None
  • Flow control: no

  And then, I switch on the switch. I get this :
  

  Waow. I've tried to change the character set, but none give something readable.I still can type basic command : if I type enable, reload, y it seems to reboot.
  

  But I can't manage it because this display is unreadable.
  

  Any idea ?
  

  Thank you, it works! As I always do, I erase everything, then I rebuild.
  Because I want to do is slow, but sure, I write this script in notepad ++, then I copy a line and spent in PuTTY.
  I was tired of blindly typing my commandments and not be sure of the result...
  (of course the line beginning with # is a comment, and 'y' is just to validate the command reload)

  #Reset To Factory Settings enable delete startup-config copy running-config startup-config reload y#waiting
  
  #Configure IP Address enable config interface vlan 1 ip address 192.168.77.250 /24 exit ip default-gateway 192.168.77.1 exit copy running-config startup-config
  
  #Reload to make sure it saved properly reload y#waiting
  
  #Create a web UI user enable config username admin password admin level 15 exit copy running-config startup-config
  

  Then I ran to try to access to the web interface... yeah, victory !!!
  

  Thank you very much Dell Community for your support.
  

  Thank you Dell for your hardware, PuTTY & Notepad++ for your software...
  

• Do a factory reset on my AirPort Extreme 802.11n resets my country code?

  Do a factory reset on my AirPort Extreme 802.11n resets my country code?

  Wireless Diagnostics warns on codes of countries in conflict.

  I ve got an AirPort Express 802.11n and an AirPort Extreme 802.11n

  The country code of the Airport Express is ok, but Airport Extreme shows me different options.

  Any suggestions?

  Please

  A factory default reset will set the area code of the AirPort Extreme back to the initial setting that it was when it was new, but this should not be necessary because you can change the country setting without having to perform a factory default reset.

  You can see the options available for your AirPort Extreme by opening AirPort Utility, by clicking on the image of the AirPort Extreme, and then click Edit in the window that appears.

  Click on the Wireless tab at the top of the window, and then click Wireless Options near the bottom of the window. Click on the country selection box to see the options available for your AirPort Extreme country.

  

  Apple is doing to "regionalize" airport routers, so, for example, that if you bought the AirPort Extreme in the AirPort Express to the United States and Europe, the country on the extreme options will only show of European countries, so that the country on the version options American Express shows countries in the Western hemisphere.

• Satellite T130 - 11 H Factory Reset - problems later

  I factory reset my Toshiba laptop and now I have problems.

  When I start the laptop I constantly get the message "prepare your pc for first use" and it starts, Toshiba menu starts too and keeps telling me it's to complete the installation.

  Randomly, he finished and restarts, boots up to the same problem.
  I tried to reinstall via usb as disk media.

  It s really strange.
  Do you use an installation of recovery for the first time?

  The value of the default BIOS and try again. You can also try to format the whole HARD disk before starting the installation of recovery using your USB key.

• Satellite L750D and factory reset - HDMI still doesn't work do not

  Satellite L750D
  psk361 - 038008
  9b341741w

  My hdmi suddenly stopped working, tried things usual fn + f5 / f8, win + p key, enable / disable lower resolution etc. so decided to factory reset but still pc hdmi does not graphics card.

  tried it on my panasonic usual tv nothing works, tested on samsung tv without result, the pc detects the tv and even sets the audio to my TV but no sound from the tv. tried unplugging tv cable and pc stop feeding and took out the battery for 10 sec, trendy everythign on all together, still does not work.

  I checked the hdmi cables with other devices and work on the two TV - using the shortest cable to test the laptop.
  honestly, I thought that it was a software problem because it can real detects the TV but no picture or sound work, which indicated the hdmi cables, but they work with my ps3.

  so, it is not the cable, not the TV, not the software, hardware maybe? but it detects my TV...?

  so I am really confused here more info please ask first time using the help forum :(

  8mnth old pc, who is sitting on a rail so it is not at all, overheating hdmi worked perfectly since the day I got it, I didn't have any changes when it has stopped working... > _

  any help much appreciated sincerely.

  Hello

  If all goes well he material s no problem, but I m afraid it could be
  I think it might be a hardware problem, because you said that you have already configured the laptop back to factory settings and this has not solved the problem.

  I understand this correctly? You used the recovery disc or HARD drive recovery?
  Is this good?

  What you could do is to check if your BIOS is up to date.
  On the European driver Toshiba page, you will find the latest version of the BIOS.
  Check if you can update the BIOS.
  In addition, I recommend setting the BIOS to default and settings to save the changes.

  At least a graphics card driver might be updated also. Its worth a check however, I m really not sure if this might help you

• Hp pro book series S 4530 s setting factory reset

  I'm trying to reset my laptop back to factory settings. I have directions - Ecs during startup, press f10, follow the instructions on the screen file - reset default.

  The only "statement" coming is to confirm the reset by pressing Yes or no, I went through the procedure several times. When I restart the computer, nothing is different... Everything, everything is still there.

  Can any help?

  Hello:

  If you make reference to the factory reset the hard drive to its original of the condition of the box, you should be pressing the F11 key at the beginning of the HP welcome screen.

  Tapping the F10 key and reset the BIOS to its default values, just reset the BIOS to the default settings, not the operating system and programs provided with your laptop.

• P1606: p1606dn factory reset

  IP address = 0, and dhcp in manual position after factory reset.  Unable to connect to the printer to set up or print.  USB works fine.

  Hi @MJF2,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to get your printer on the network after a reset. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  In order for me to help you best, I can get more information.

  • What has been reset to the default values, the printer, or router?

  You mentioned "manual dhcp value." This means that you have an IP address of the printer? What is the IP address, you are affecting the printer?

  • If the printer does not get an IP address, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232, etc.

  Please see the user's Guide: "'Configure the network settings ' and the guide below:"

  • Printer keeps no connection Wi - Fi

  If you were referring to the router, not the printer try to restore default printer.

  Restore Defaults:

  1. Turn the product off.

  2. Turn the product on and while it is initializing, press and hold the GO and JOB CANCEL button turning on printer. After all, the LEDs are flashing, release the buttons.

  If you need assistance, please let me know the instructions above. I can't wait to hear strings attached good luck!

• Can switch 10, I do refresh of system or factory reset after the update of win10?

  I have the Switch 10 with Win8.1 and think to update to Win10, but no can not find information about refresh/factory reset system after the update. I'll be able to factory reset the tablet to Win8.1 or once updated, all refresh/reset options have disappeared?

  (1) I strongly suggest you to create USB recovery media using Acer erecovery

  http://Acer.custhelp.com/app/answers/detail/A_ID/26287/~/create-a-Acer-factory-default-backup-in-win...

  and you'll always come back to windows 8.1

  (2) after 10 windows upgrade, you have 30 days to return, once placed, you will not be able to go back to using 10 integrated windows option but you will be able to do it using the recovery media

  http://winsupersite.com/Windows-10/how-revert-back-your-previous-OS-after-Windows-10-upgrade

• HP ENVY 15 3014 TX - NO SOUND AFTER FACTORY RESET, WON'T ALL THE DRIVERS INSTALLED.

  Hi my name is ali majaz, I recently did a reset on my phone, because there was a sort of Malware or viruses, which froze my device just after startup, so I did a factory reset with HP Recovery Manager, now the problem is that all things are restored, but even after installing the audio driver, the high defination IDT and Intel(r) Audio display the sound does not work, everything seems perfect, AUDIO troubleshooting gives no error, there is no mistake anywhere, even the speaker in the taskbar icon looks exactly as it should be, but when I play anything, there is no sound, games, but I hear nothing, I tried all the tricks in the book , but nothing works, I chose speakers & headphones that my default device, but nothing works, no sound at all, no system sounds, no sound in youtube, I don't know what to do, I tried to install all updates but nothing works, I doubt there is a sort of breach of registry in my machine , but after resetting it should have disappeared, SO if IT YOU PLEASE help me

  LOL OK SO A HAPPY FINALLY ENDING, I DO NOT KNOW HOW, COZ I TRIED SO MANY THINGS, BUT I JUST SWITCHED OFF THE MACHINE AND OPEN THE REAR HOOD, JUST DID A HARD RESET & BAM!  I TURNED ON AND THE SOUND WAS THERE, I DON'T KNOW HOW IT HAPPENED, MYA BE THERE WAS A BAD PROFILE CONNECTS AUDIO SERVICES SO I CHANGED IT BEFORE CLOSING DOWN, WITH NO HOPE IT WILL FIX IT, BUT I GUESS THAT IT IS WHAT SETS THE SOUND, NEVER LESS... IT WORKED... I'M SO HAPPY

• HP officejetpro 8500: 8500 hp factory reset

  Hello. I'm getting rid of my printer. HP 8500 Office Jet all-in-one. What I have to wipe all personal information or do a factory reset? If yes how can I do this? Thank you.

  Hi diane01,

  I don't think that the printer saves personal information.

  However, it is possible to reset a partial which:

  (a) resets the settings for the default user.

  (b) resets the language settings and country on some models.

  Here is the link to the support page that gives instructionds for this process:

  http://h20566.www2.HP.com/hpsc/doc/public/display?calledBy=Search_Result&docid=emr_na-c01631212&docLocale=en_US

  I hope this helps.