powerdvx is not read disc when inserted in the dvd player

Similar Questions

• C50-B-15Z satellite does not recognize discs when inserted

  Toshiba Satellite C50-B-15Z
  Hello! Pls my Satellite C50-B-15Z newly purchased does not recognize discs when inserted. It dosent play any CD or DVD drive, or it even recognize it at all. Pls help... What should I do?

  Original Win8.1 is installed on your machine?
  Have you tested the feature with different CD and DVD, DVD (original)?

• CD/DVD does not auto play when inserted in the drive

  original title: AutoPlay does not work

  no media auto play when inserted in any drive.

  no media auto play when inserted in any drive.

  =========================================================
  Perhaps the following goods range offers a few ideas:

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• Error message when you use the DVD player

  I have a Satellite P200D and whenever I put a disc any in the drive I get an error NON-DISQUE when I eject the disc. I always make sure I close all programs relating to the use of the disc before you try to take out the drive. It is a new problem that I used the laptop for a few months with no problems at all. The text of the error message is below. Pointers would be appreciated. I can live with that, but it would be nice not to have to.

  Exception Processing Message 0xc0000013 0x764C023C 0x8E4A1B6C 0x764C023C 0x764C023C settings

  OK, if you try to exit the disc using the eject button on the side of the laptop, why not try ejection through windows software.

  To do this right-click on the dvd drive in my computer, then click "eject". This could mean windows that its ok to let the player go now.

  Another solution would be to save all the important data to another drive, and then put the laptop "out of area State" by using the recovery disk. I would say that the problem will disappear.

  However, if problems persist, please consult your place of purchase for a check up.

  Good luck.

• Updated El Capitian, why can't I read films in imovie in the DVD player, I did?

  In original imovie I could play the iMovie anywhere, I did, now the iMovie I made won't play in any DVD player. What hurts when I made them?

  In order to play your DVD in a DVD player, to do with a program like iDVD for DVD authoring.   You can make a DVD of data without using a design program, and who will play on your computer but not on a DVD.

  With the latest version of iMovie, you make a DVD created by sharing your movie to a file and then dragging (import) this film in a

  creation of program such as iDVD or other ones you can get on the market.    He will then play on a DVD player.

• Qosmio F60 - change the screen settings when you use the DVD player

  When I try to play a DVD using the DVD BD player a message that tell me to change the setting of the screen I followed their instruction to no availo. I am running Windows 7. The DVD plays on windows ok support.

  Any help would be appreciated

  Hi ametec.

  This DVD BD drive has been preinstalled on your computer?
  Which message get you exactly? Maybe you can download a copy of screen or something else

  In my opinion this problem is only related to this because the Media Player DVD player everything works
  For example, I use VLC media player for all my audio and video files. It s a small freeware player that can play most audio and video files. In addition it s not necessary to use a special DVD playback software.

• The computer hangs when you use the DVD player

  Whenever I am playing a DVD, any DVD playing software that I use (Windows Media Player, Real Player, PowerDVD), the DVD plays fine until I move my mouse... then the computer freezes immediately. CTRL + ALT + DEL doesn't work. I have to use the power button to turn off the computer.

  I updated the DVD drive device driver; still crashes.

  I have a Dell Optiplex GX 280

  Windows XP SP3

  DVD is a teac dvd + rw dv-w58e

  
  

• Re: DVD of the (optical) drive cannot read a disc when inserted.

  Hello everyone.

  MY DVD drive can not read a disc when inserted.

  When I check the Device Manager, it has the following against the optical drive error message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  How can I solve this problem and fix it for free if possible? Download a patch from the website of toshiba?

  Your help is greatly appreciated.

  Mark

  See also http://support.microsoft.com/kb/314060/en-us and post comments.

• My hard drive will not read discs! What should I do?

  My laptop will not recognise discs I put in the forest of cd! I am trying to install Microsoft Office, and it will not even read the disc! Are there other ways of installing Microsoft Office? Or any suggestions how I can get the t hard drive work?

  Thank you

  Any comments would be much appreciated!

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Qosmio G50 - CD / DVD player will not read disc

  I've seen similar posts on this problem but I have not solved my problem. Sorry if it's repetitive for some.

  My * DVD drive is visible * on my computer, but when I put one * disk in it does not display / run * (it cannot be read).

  I tried to use the automatic thing to delete the files in the upper and lower register. And I tried to reinstall the driver.

  PC diagnostics said the DVD player has failed the test, but is not a solution. Nor can help Microsoft fixit.

  Please can someone help. Thank you

  You can use optical disc as boot device?
  ODD readable disks bootable?

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Why is my cd not load & play automatically when it is inserted into the media player?

  Why is my cd not load & play automatically when it is inserted into the media player?

  If you use Windows Vista or Windows 7, try the following:

  Click Start, type: AutoPlay

  Press enter on your keyboard

  Scroll to CDs

  Click in the list box

  Select an action:

  Play audio CD using Windows Media Player.

  See:

  Windows Media Player Fact not play Audio CD- Roma automatically

  Also:

  Media Player 12 auto-play when inserting audio CD ... behavior

• Windows Media Center can't find DVD disc when inserted.

  Original title: dvd player

  Windows 7

  Media Center can't find DVD disc when inserted

  shows driver to be good and up-to-date

  Play any CD or DVD or recognized by the system?

  DVD players are a common failure point in computers.

  If yours is a desktop PC:

  A replacement can be purchased for about $20 and is easy to install.  Remove all power.  Button Hold ON in during 7 seconds.  Open the case.  2 screws hold the disc instead of delete, then remove the two wires from the back.  Make slide the other in its place and reverse the procedure.

  If yours is the laptop:

  It is part of the OEM.  Therefore, it is much more expensive.  Probably in the vicinity of $100.  You can instead buy an external DVD drive for about $25, which is connected by USB.  It has the advantage of being portable and universally adaptable to any other PC.

• CD Rom and DVD Rom not reading discs

  Hello

  My CD/DVD-rom is not reading any music cd or a DVD movie that I insert in the drive. I looked in the currency manager and the samsung cdrw/dvdsm-352F material displays a yellow exclamation point. It gives me a code 41. He says that the hardware is installed, but cannot read the device.  Can you please let me know how I can fix this.  Thank you!

  
  

• Error: The DVD player won't read or burn discs. TS-L633R CD-DVD player. Laptop HP DV6-3120US. Win 7.

  The product name and number:

  HP Pavilion dv6-3120us

  OPERATING SYSTEM

  Windows 7 Home Premium. 64 bit.

  Error message

  "Insert a disk; Insert a disk in drive E:. "

  Background

  Windows 7 system pre-installed on recognized computer CD/DVD ROM drive for about 3 months. Malware corrupted operating system. I reinstalled the OS disk from the recovery partition. CD/DVD ROM drive could not read or write, and I can not restore the old files or save the current configuration via the CD/DVD-ROM drive. All Windows 7 drivers, and hardware updates seem to be installed and up to date as of 04/10/2011.

  Troubleshooting steps

  1 attempted to play audio CDs. Same error message.

  2 tried to read data CD-ROM. same error message.

  3 tried to read DVD - ROM data. same error message.

  4 Write DVD ROM has failed. Same error message.

  5 re-loaded OS 2nd time. No change. Same error message.

  6. checked with HP Support Assistant. DVD drive is recognized but not the media. No change.

  7 checked Device Manager. DVD player is recognised as TS-L633R.

  8. driver is cdrom.sys version 6.1.7600.16385. Clicked on Update Driver, no change.

  9. I tried the uninstalling and reinstalling the driver. No change.

  10 enabled BIOS. Processor AMD Turion II P540 Dual Core 2.4 Ghz. BIOS seems to be up-to-date, version F.27.

  11 BIOS lists bootable CD/DVD-ROM drive. Reordered the first road and used Knoppix Linux boot boot disk, no change. Windows starts instead.

  12 review of registry for "filter" and "lower filter" entries.  Checked registry 4D36E965-E325-11CE-BFC1-08002BE10318. No upper or lower filters entries in current filter. No change.

  13 Ran 'hardware and troubleshooting of devices. " It cannot detect the cd/dvd. No change.

  The drive has power, WEAVES, is recognized by the BIOS and Windows 7. However, it does not read or write CD ROM or DVD ROM discs

  I'm out of options.  What to do to make the drive to cd/dvd rom read and write CDs?

  

  Thanks for your help.  Matt

  Received a new DVD/CD ROM today S of Ben and Alan at HP today.  The drive was manufactured in July 2011 and seems to have the same model number information. The old one was from December 2010.

  Installation took about 10 minutes to the included instructions, and the player now plays all CD and DVD media.  Thanks to the HP support for replacement of equipment warrantly quick fix.