PowerEdge 1950 problems

I have a dell poweredge 1950 I am trying to load windows 2003 server on but keeps telling me that Setup not found not disks.i downloaded the controller driver on the site of lsi and copied on a diskette disk.i pressing f6 during installation of the OS and tried to install the driver from a floppy external drive.but usb system do you want mtp lsi supported stuff and I press S to mean yes he loads the driver but continues to get back to the page where it asks if I want to load support.what should I do? someone help pls


Tags: Dell Servers

Similar Questions

  • map of scsi (redirect) dell poweredge 1950

    Hello world

    I installed and running a Dell poweredge 1950 that I use it to backup (tape) using Backup EXEC 2014. In the alley, he has an empty slot for a SCSI expansion card where a need can connect via a SCSI connection a different external tape drive. Due to the fact that the dell model is quite old, it is difficult to find a type of card.

    I found online something to my request: [View:www.xbyte.com/ProductDesc.aspx]

    but the problem is that it has two SCSI ports and it is too big to get it. I tried to find one with a single port, but I can't seem to find it. Have you also had this problem and if so where you bought the SCSI expansion? There is also the option to purchase a SCSI cable / USB, but I don't want to go with this solution. All advice what to do or where to buy expansion card I need.

    Thanks for the tips.

    Best of this post in the Forum servers, here:

    http://en.community.Dell.com/support-forums/servers/default.aspx

    Bev.

  • Dell PowerEdge 1950 fuori co - sostituzione controller SAS [MS]

    Buongiorno,

    We have a problema con uno dei nostri Server PowerEdge 1950 (anno 2006): I brain rigidi are non più riconosciuti e sospettiamo che tratti del RAID SAS controller if. Vorremmo ask UN preventivo by a componente sostitutivo is possibile.

    Want cortesemente in pre-empted.

    Speaking saluti,

    Mario P.

    Buongiorno,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

    - Service tag del Server

    By the spedizione:
    1. company name:
    2 address:
    3 City:
    4 Provincia:
    5 cap:
    6 name/last name/number phone/e-mail del referent in loco:

    With the fatturazione
    1 nome società:
    2 via:
    3 City:
    4 Provincia:
    Heading 5:
    Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
    7 partita IVA

    Speaking saluti

    Manual

  • (Redirected) Dell poweredge 1950

    I have a dell poweredge 1950 server that was given to my school and I am trying to install windows server 2003 on it, but an error saying:

    Setup did not find any hard drives installed in your computer.

    Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running

    How can I fix?

    I also tried to boot Ubuntu from a usb key and that no longer works.

    I also said to update BIOS or Flash the Bios but I don't know how to do and do not know if that'll fix it.

    I want to just get to the top and running, it can be Ubuntu or windows everything is easier.

    Any help would be greatly appreciated

    Better for this post in the Forum Server-PowerEdge, here:

    http://en.community.Dell.com/support-forums/servers/default.aspx

    Bev.

  • Riser PCI poweredge 1950

    Buongiorno,

    I wanted to know is era possibile cute UN riser by schede standard PCI (NOT PCI Express) knew a server PowerEdge 1950 (serial number C2GY44J).

    Grazie

    Buongiorno, the sto contattando by mail.

  • Upgrade Ram PowerEdge 1950

    Hello

    Hoping to use an old PowerEdge 1950 as a backup server, I'm hoping to replace the existing 4 x DUAL IN - LINE MEMORY MODULE, 1 G, 667 M, 128 X 72, 8, 240, 2RX8 for 4 modules of 2 GB instead, however there is no motions of this material online.

    is the upgrade possible & what would be the recommended modules?

    Much thanks

    You want to just replace the 4x1Go with 4x2GB? Easy to do. Just to make sure you get good memory (must be fully buffered, etc.).

  • Error "Failsafe call support" Poweredge 1950

    Salvo, vi contact by da conto di rete ferroviaria italiana Palermo (Sicily), abbiamo due Server poweredge 1950 che gestiscono home automation della nostra sala controllo siciliana.

    I had mi i seguenti if server:

    St.3ZLN93J presenta sul display scorrevole written "Poweredge 1950 e1000 Failsafe call support e1217-5V PwrGd"

    St.5ZLN93J presenta all'accensione sul monitor is written "RN50 A21 Bios.

    I had Server gestiscono I servizi intero edificio by cui confido in una vostra risposta celerate.

    speaking saluti

    Buongiorno,

    Sono spiacente di comunicarle schede madri poweredge 1950 del che non sono più available.

    Todas

  • The lamp indicator yellow LED on Dell PowerEdge 1950

    Hello

    You asked me to "remove" the warnings of several Dell PowerEdge 1950 LED amber.

    I looked at the LED and was unable to 'remove' the warning using the controls on the LED display on the front the 1950s.

    How this is done?

    Thank you.

    Hello

    If the error is not active then you can get rid of the clear amber of the erasure of the journal of material. You can either start to the BMC to clear the or use one of our management as OpenManage Server Administrator utilities.

    Thank you

  • PowerEdge 1950 refuses to update BIOS

    I'll have a chance update the BIOS of a Dell Poweredge 1950. The vehicle currently has BIOS version installed 2.4.5. I get "BIOS Update Failed" when restarting.

    I tried to install 2.7.0 and then tried 2.6.1 when it does not work. I also tried to open a command windows server 2012 R2 and using the/force command prompt when you run the BIOS update. That no longer works.

    Any help?

    If the splash screen is custom, so it is an oem card, try a file from here: www.dell.com/.../DriversDetails. Starts = 2731115761 & osCode = WW1 & productCode = oth-1950 & languageCode = en & categoryId = BI

  • WOI for Poweredge 1950

    I have a rack with several different generations of Poweredge 1950 servers and a few R610s.  I would like to distance the departure (WOI), stop and use the systems in the basket.  Systems do not have the DRAC cards installed.

    I WOL installation for all systems and can start and stop all on the local network very well.  If I can start a unique system of p1950 remotely, then I can easily start and stop all the systems using this unique system.

    But I can't do simple p1950 system to remote start.  I put the Port Forwarding on my router/modem DSL to transfer 9 UDP to the system and sees the magic packet very well... but it will not turn on.

    I am familiar with the planks of the DRAC and the various management tools remotely, but reading that I did... it seems possible to be able to power and turn off the machine to the Internet.

    Please can someone explain what I need to be able to remotely turn on the system?

    I can do without a DRAC card installed?

    This software is required to send to connect with the system and send the signal from power?

    Thank you!

    You can use the ipmitool to turn on and turn off the server. For this you require not DRAC. You must follow the steps below to configure this

    1. Configure the IP address and compatible IPMI over LAN to iDRAC or BMC.

      1. R610 will have default iDRAC. For more details see section "Using the iDRAC6 Configuration utility" on iDRAC user's Guide. You can download the iDRAC from here user guide

        FTP://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_software/esuprt_remote_ent_sys_mgmt/integrated-Dell-remote-access-cntrllr-6-for-monolithic-Srvr-v1.95_User%27s%20Guide_en-us.PDF

      2. 1950, you need to configure BMC. You can configure the IP address and IPMI over LAN at similar to R610 boot
    2. Install ipmitool on a client computer. You can download ipmitool from here
    3. Run the following command to power on the server

    ipmitool - I lanplus h u Pei power on

    Run following command to get help on this command

    ipmitool - I lanplus h u Pei power

  • Install windows server 2012 Poweredge 1950

    I try to install Win server 2012 on a server Poweredge 1950 create a bootable USB drive and a DVD but does not work anyway, I follow several web options like boot installation for USB and CD boot process, but no matter what I do on the USB port, just to hang and will jump with the DVD , he wont even try to read it.

    Any help is very appreciated

    Try to start the USB on another machine. If you browse the content of the flash player, you should have some files (sources, etc) and a few files (setup.exe, etc.). Have you followed the instructions of preparation USB EXACTLY as I statements?

  • PowerEdge 1950 II PCI Riser

    Hello

    I have a Dell PowerEdge 1950 genII.

    But he holds a riser PCI64,

    And I saw on various forums that it could be replaced by a riser PCI - Ex.

    With the REF: FP332

    I bought the riser to see that it in fact does not at all...

    The connector must be reversed in fact to make it work/adjustment.

    -That someone had a sollution or compatible PN

    Riser (new)

    Reference Dell PN: CN-0FP332-69702-85 a-0410

    Rev: A00

    Server:

    Dell PowerEdge 1950 II

    ST:

    Old riser (full)

    Reference Dell PN: CN-0J9065-69702-76Т-1164

    Rev: A01

    Old riser (length hakf)

    Reference Dell PN: CN-0J7554-69702-775-1347

    Rev: A01

    If you need more info,

    Let me know

    Hello

    MOHdennisNL

    With the REF: FP332

    I bought the riser to see that it in fact does not at all...

    The connector must be reversed in fact to make it work/adjustment.

    -That someone had a sollution or compatible PN

    Riser (new)

    Reference Dell PN: CN-0FP332-69702-85 a-0410

    It is the side map for location of built-in storage. If you forced into the slot for the Center or the mounting left then you may have damaged the slot.

    MOHdennisNL

    Old riser (full)

    Reference Dell PN: CN-0J9065-69702-76Т-1164

    Rev: A01

    Old riser (length hakf)

    Reference Dell PN: CN-0J7554-69702-775-1347

    J9065 and J7554 are the center of PCI-X and the left risers. The Center and the left lift PCI - e are the numbers J7846 and JH879. You might find them listed under the different reference numbers as well. We have generally several numbers for the same part.

    Thank you

  • We had to add storage to a PowerEdge 1950 production

    Hello

    I have a PowerEdge 1950 server with 4x73GB hard drives in Raid 5 configuration. I'm running out of space and the need to increase the storage capacity. If it were possible, I would like to replace 2 of these drives with bigger disks. On the details of the server product page it says I could use the 146 GB drives. Can I have incompatible disks - 2 x 73 and 2 x 146? If Yes, can I do it in phases – take a swap in offline mode, wait until the reconstruction, repeat? And if I can do this, I would need ideally to create a new partition, like now, it's all a big reader of C.

    Is this possible? If not, what are my options?

    Thank you!

    You can replace each disk individually with adults, BUT:

    1. If you don't replace ALL the disks with the largest, the array will be the same size, and you will NOT be able to use the extra space.

    2. If you replace all disks with the biggest, there no way to expand the table. The only thing that you would be able to do at this point is to create a second table on disks using the newly available space. Because each painting is considered a separate drive by Windows, you would not be able to extend the C: drive with the new space, but if you have another partition (D:, say), you can move the D: data to the new array, remove the old D: in the first table, and then expand C:.

  • Maximum storage capacity for PowerEdge 1950 III

    Hi guys,.

    Just wondering this as the maximum capacity of hard drives that can take the PowerEdge 1950 III. Ive currently got a 300 GB 15 k Cheetah drive in Bay 0 but I want to change them for 2 tablespoons. I can do this, or must they be smaller. I read on some forums that it might take readers to 2x2TB but according to the technical data it can only take up to 2x750GB which would be disappointing.

    If you need more information I can provide fortunately.

    Thank you
    Arron

    Regardless of the controller you use, the maximum disk size is 2 TB. Do not use expensive desktop/laptop or NAS drives.

  • OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

    As I said earlier:

    OK, I am trying to install vSpere on my Dell PowerEdge 1950.

    Hardware specifications:

    4 GB FB-DIMM DDR2 memory

    x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

    There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

    Drive hard WD 1 TB, it's the one I use for the VD.

    When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

    He says that it cannot install it on a virtual drive? My server is not compatible?

    Edit: There is another error that says: cannot read the partition table for device:

    /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

    What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

    Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

Maybe you are looking for