PowerEdge 2800 - problem with Internet remote access
Hi all
I came here for help with connectivity to my server remotely. I bought Server poweredge 2800, I did all the necessary configurations including raid and system installation. After I try to open a remote web access to my server and I still can't get this to work. I went to my server configuration and static value ip, gateway, mask after that I tried to connect to it, via a browser, since different pc in my network for poweredge on standby. Unfortunetly, I can't get connection with it (I put https://ipAddress). I went again this configuration and also tried with the customer option dhcp or static including the configuration of my router for this ip address, but no one works for me. I don't have any idea what I'm doing wrong. Can you please help me please?
Open a command prompt and type in the following:
racadm racresetcfg (this will reset to the default values listed below DRAC) - reset may take up to 10 minutes to complete - there is no progress shown, so give it about 10 minutes before moving.
IP address: 192.168.0.120
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Login: root
Password: calvin
If this information will not work for you, you can set the network information by the following from the command prompt:
racadm setniccfg s ipAddress netmask entry gate
Again, can take a few minutes before you can access it with the new settings.
Tags: Dell Servers
Similar Questions
-
Original title: problem with Internet connection sharing
my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter
in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICSthen the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".so, I'm a person answer in this forum' Obtain an IP address automatically is the wrong setting on the Ethernet connection. " To return to the sharing tab and unshare the wireless connection. Close all windows network, and then open them and re - share the wireless connection. Who must configure IPv4 for the Ethernet connection properties for:IP address: 192.168.0.1
Subnet mask: 255.255.255.0
Default gateway: no
"DNS server: none.I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IPand made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have createI tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.
What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settingsBut why after I restart my PC, this problem comes...someone knows how to help me with this problem?Hey, Mimbs,
You can try the similar thread to the next with a possible solution:
Also for reference:
-
Adobe will open not downloaded aliant bell bills no problem with internet explorer, but I do not use it
The current versions of Firefox have allowed a built-in PDF Viewer that has all of the features that other PDF as Adobe Reader readers have or can not work properly otherwise.
You can change the action for Portable Document Format (PDF) to Preview in Firefox to use Adobe Reader software or set always ask in "Firefox > Options/Preferences > Applications.
You can set the pref pdfjs.disabled true on the topic: config page to disable the build-in the PDF Viewer.
You can also check the value of the plugin.disable_full_page_plugin_for_types pref and remove the part application/pdf, if any.See also:
-
Is a message "cannot find server" a problem with Internet connectivity or something else?
Original title: Net question?
When I get a message "cannot find server", is this a problem with internet connectivity or something else? MSN and explore will be not open. Thank you.
Hi Aziz,.
The Cable Guy came and installed a new modem and the new thicker cable. So far so good. Thanks for your reply.
-
I took a screen shot of a pop-up, so I me advise about this pop up, but now I can find it. Where can I find the screenshot? I looked in my documents as well as photos, but he isn't here? I need to find the screen shot to get help with it because I had big problems with Internet explore all day today and this pop-up started yesterday.
Thanks for any help I can get.
Linda
Original title: screenshot
I took a screen shot of a pop-up, so I me advise about this pop up, but now I can find it. Where can I find the screenshot? I looked in my documents as well as photos, but he isn't here? I need to find the screen shot to get help with it because I had big problems with Internet explore all day today and this pop-up started yesterday.
Thanks for any help I can get.
Linda
Hi Linda
Take a screenshot in Windows 7 requires several actions.
1. press the Printscreen key. This operation copies an image of the screen to the Clipboard.
2. open an imaging program such as MS Paint and paste the screenshot.
3 save the screenshot image in a folder of your choice.
Concerning
-
My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please
Hello
Thank you for using https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html > and all the steps in "troubleshooting connectivity issues.
If necessary, and for any other question, click on through http://helpx.adobe.com/contact.html and so "open" Please use the chat, I to can I part had the best experiences. An employee of Adobe Preran I quote: the chat button is enabled as soon as there is an available to help agent.
Hans-Günter
-
Problems with internet access, troubleshooting, Windows 7 does not work.
Hello, I have recently started up to Windows 7 on a partition of Windows 10, because a game wasn't working properly on Windows 10 system (has notified downgrade after a one hour session troubleshooting).
I don't know if the game is causing these issues or anything else, but my internet connection goes away, even if the internet bar shows that it has internet.
Right now, I'm typing this, it says I have a problem.
Also, I have troubleshooted a lot of times, with the answer is:
This happens at random, or whenever I join a game for Minecraft.
Does anyone know the solution to this problem?
Other images:
Hello
You can see the answer given by Arya S Asok by mentioning the problem with adapter or wireless access point
Let us know how it goes.
Kind regards
-
Problem with internet access point
Hello, I saw that this question was asked before, but has never seen a solution to my problem, I will explain:
I have like 5 months with this problem. I have a TP-LINK 300Mbps Wireless N Router, model No. TL-WR841ND. The fact is that when I plug in my router to the Modem, my wireless network seems to work fine, but when I try to connect to my computer or any other device to the network (mobile phones, playstation 3, tablets, etc.), I am unable to do so. On my laptop, I get the message: 'Problem with wireless adapter or access point', but the most confusing thing is that sometimes I can connect to the Internet via my network wireless without any problem.
This time I decided to post my problem, because I'm tired of it. Sometimes it happens, sometimes it doesn't. Right now, I have two days without Internet connection (Via router), because my modem works properly.
PS: I have another router (Linksys) and I can connect to this network, but I want to solve my problem with the TP-Link because the signal is stronger. Help!
See links.
How to install a TP-LINK wireless routers (Recommended)?
http://www.TP-link.com/LK/article/?faqid=92
Why can I not access the Internet after connecting the TP-LINK router to my modem.
http://www.TP-link.com/LK/article/?faqid=138
TP-Link FAQ.
-
problem with users to access remote vpn site to site vpn network
I did the Setup: asa 5510 configured remote access vpn. My vpn users receive asa 5510 range 192.168.50.0/24 addresses and users access my local lan 192.168.0.0/24. the second side of the local lan 192.168.0.0/24 on asa 5505, I did a vpn site-to-site with network 192.168.5.0/24.on that both sides of a site are asa 5505. inside the interface asa 5510 Elise 192.168.0.10 and inside the interface asa 5505 have address 192.168.0.17.third asa 5505 networked 192.168.5.0/24 address 192.168.5.1. I want my remote access vpn users can access resources on network 192.168.5.0/24. I create the static route on inside the asa 5510 static route 192.168.5.0 interface 255.255.255.0 192.168.0.17 and a static route on inside the asa 5505 static route 192.168.50.0 interface 255.255.255.0 192.168.0.10, but it's not working. What do I do?
execution of the configuration of my asa 5510 is
Result of the command: "show run"
: Saved
:
ASA Version 8.4(2)
!
hostname asa5510
domain-name dri.local
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
nameif outside
security-level 0
ip address x.x.x.178 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.0.10 255.255.255.0
!
interface Ethernet0/2
description Mreza za virtualne masine- mail server, wsus....
nameif DMZ
security-level 50
ip address 172.16.20.1 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns server-group DefaultDNS
domain-name dri.local
object network VPN-POOL
subnet 192.168.50.0 255.255.255.0
description VPN Client pool
object network LAN-NETWORK
subnet 192.168.0.0 255.255.255.0
description LAN Network
object network NETWORK_OBJ_192.168.0.0_24
subnet 192.168.0.0 255.255.255.0
object network 192.168.0.10
host 192.168.0.10
object service ssl
service tcp destination eq 465
object service tls
service tcp destination eq 995
object network mail_server
host 172.16.20.201
object service StartTLS
service tcp destination eq 587
object service admin_port
service tcp destination eq 444
object service ODMR
service tcp destination eq 366
object service SSL-IMAP
service tcp destination eq 993
object network remote
host 172.16.20.200
object network test
host 192.168.0.22
object network mail
host 172.16.20.200
object network DMZ
host 172.16.20.200
object network Inside_DMZ
host 192.168.0.20
object service rdp
service tcp destination eq 3389
object network DRI_PS99
host 192.168.0.54
object service microsoft_dc
service tcp destination eq 445
object service https448
service tcp destination eq 448
object network mail_server_internal
host 172.16.20.201
object service Acronis_remote
service tcp destination eq 9876
object service Acronis_25001
service tcp destination eq 25001
object service HTTP3000
service tcp destination eq 3000
object network VPNPOOL
subnet 192.168.50.0 255.255.255.0
object-group network PAT-SOURCE-NETWORKS
description Source networks for PAT
network-object 192.168.0.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object object admin_port
service-object object ssl
service-object object tls
service-object object https448
object-group service DM_INLINE_SERVICE_2
service-object object admin_port
service-object object https448
service-object object ssl
service-object object tls
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_3
service-object object admin_port
service-object object https448
service-object object ssl
service-object tcp destination eq smtp
service-object object tls
service-object object Acronis_remote
service-object tcp destination eq www
service-object object Acronis_25001
service-object object microsoft_dc
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object tcp
object-group service DM_INLINE_SERVICE_4
service-object object Acronis_25001
service-object object Acronis_remote
service-object object microsoft_dc
service-object tcp destination eq www
service-object tcp
service-object ip
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any object mail_server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any object mail
access-list Split_Tunnel_List extended permit ip 192.168.0.0 255.255.255.0 any
access-list outside_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.5.0 255.255.255.0
access-list DMZ extended permit object-group DM_INLINE_SERVICE_4 172.16.20.0 255.255.255.0 any
access-list DMZ extended permit object-group DM_INLINE_SERVICE_3 host 172.16.20.201 any
access-list DMZ extended permit object-group DM_INLINE_PROTOCOL_1 172.16.20.0 255.255.255.0 any inactive
access-list DMZ extended deny tcp any any eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
mtu management 1500
ip local pool vpnadrese 192.168.50.1-192.168.50.100 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static LAN-NETWORK LAN-NETWORK destination static VPN-POOL VPN-POOL
!
object network mail_server
nat (DMZ,outside) static x.x.x.179
object network mail
nat (DMZ,outside) static x.x.x.180
access-group outside_access_in in interface outside
access-group DMZ in interface DMZ
route outside 0.0.0.0 0.0.0.0 178.254.133.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record dripolisa
aaa-server DRI protocol ldap
aaa-server DRI (inside) host 192.168.0.20
ldap-base-dn DC=dri,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=dragan urukalo,OU=novisad,OU=sektor2,OU=REVIZIJA,DC=dri,DC=local
server-type microsoft
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
virtual telnet 192.168.1.12
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 195.222.96.223
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.0.14-192.168.0.45 inside
!
dhcpd address 172.16.20.2-172.16.20.150 DMZ
dhcpd dns x.x.x.177 interface DMZ
dhcpd auto_config outside interface DMZ
dhcpd option 6 ip x.x.x.177 interface DMZ
dhcpd enable DMZ
!
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy GroupPolicy_x.x.x.223 internal
group-policy GroupPolicy_x.x.x.223 attributes
vpn-tunnel-protocol ikev1 ikev2
group-policy drivpn internal
group-policy drivpn attributes
dns-server value 192.168.0.20 192.168.0.254
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-network-list value Split_Tunnel_List
default-domain value dri.local
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group drivpn type remote-access
tunnel-group drivpn general-attributes
address-pool vpnadrese
authentication-server-group DRI
default-group-policy drivpn
tunnel-group drivpn ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group x.x.x.223 type ipsec-l2l
tunnel-group x.x.x.223 general-attributes
default-group-policy GroupPolicy_x.x.x.223
tunnel-group x.x.x.223 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect tftp
inspect ip-options
inspect netbios
inspect icmp
inspect http
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:69c651e94663fc570b67e0c4c0dcbae1
: endrunning config asa 5505
Result of the command: "show run"
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password csq7sfr0bQJqMGET encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.5.0 PALATA
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.17 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 10.13.74.33 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
object-group service DM_INLINE_SERVICE_1
service-object ip
service-object tcp
service-object icmp echo
service-object icmp echo-reply
service-object tcp eq domain
service-object tcp eq ldap
service-object tcp eq smtp
object-group service DM_INLINE_SERVICE_2
service-object ip
service-object tcp eq domain
service-object tcp eq www
service-object tcp eq https
service-object tcp eq smtp
object-group service Sharepoint8080 tcp
port-object eq 8080
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any
access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 192.168.0.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list inside_nat0_outbound_1 extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
pager lines 24
logging enable
logging asdm informational
logging mail errors
logging from-address
logging recipient-address level debugging
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound_1
nat (inside) 1 192.168.0.0 255.255.255.0
static (inside,outside) 10.13.74.35 192.168.0.22 netmask 255.255.255.255
static (inside,outside) 10.13.74.34 192.168.0.20 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.13.74.1 1
route inside 0.0.0.0 0.0.0.0 192.168.0.17 tunneled
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication telnet console LOCAL
http server enable
http 10.13.74.0 255.255.255.0 outside
http 192.168.0.0 255.255.255.0 inside
http 10.15.100.0 255.255.255.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
virtual telnet 192.168.0.53
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_2_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 10.15.100.15
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group 10.15.100.15 type ipsec-l2l
tunnel-group 10.15.100.15 ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
!
service-policy global_policy global
smtp-server 173.194.79.109
prompt hostname context
Cryptochecksum:4767b6764cb597f0a7b8b138587d4192
: endThank you
Hello
I have previously edited the my initial response was in fact not necessary since you were actually using full Tunnel
EDIT: Actually just noticed the the VPN client isnt using Split Tunnel. Its Full Tunnel at the moment since it doesnt have the "split-tunnel-policy tunnelspecified"
So you don't really have any of those.
Please mark the question answers and/or assess response
Ask more if necessary
-Jouni
-
Cache problems with Internet Explorer - SCORM quiz loading modules
Hi, as mentioned in a previous thread I created several SCORMS using Captivate 4 and use Moodle to manage learning. The SCORMS contains a presentation and a short multiple-choice quiz. We are having problems with SCORMS not opening on first page, but rather around the quiz section.
Internet Explorer-
Scenario #1. If the user launches a SCORM of Moodle for the first time the module load early on, the first slide (desired result).
Scenario #2. If a user launches a SCORM a later date, after having already failed the quiz, the module will be loaded at the beginning of the quiz (not result desired, but can live with it).
Scenario #3. If the user starts a module a later date, after having previously passed the quiz, the module loads the results page and now shows a failure (certainly not aim).Firefox-
The problem described above is not a factor. Regardless the user rank past that the module will initially launch the first slide, whenever it is launched. But Firefox does not results in Moodle notebook.CP settings
The acceptance and rejection in Captivate settings are set to ' go to ' slide 1. The results are passed to the notebook without problem, but it is a problem in the third scenario, if a user launches accidentally after module have successfully earned a pass. Someone at - he encountered this problem and managed to force the module to launch on the first page? Ideally don't want to remind users in clear cache every time when you use IE.
Any help is appreciated!
Thank you
GAV
Publication of SCORMS in the hat 4 with preferences for AS2, SCORM Version 1.2 and Flash Player 7. Tested with IE8Hello
It is not a cache issue - is in fact of Captivate in "resume function" that does this.
You must disable this "feature" in Captivate yourself. Access reports settings in Captivate and click LMS customization settings in the lower right. Check the box "never send RESUME data", and then republish your SCORM package.
/ Michael
-
Some Gmail features failed to load due to a problem with Internet connectivity.
This error message appears both with Firefox and Chrome when using G mail. Also if it works at all.
switching to compose for the project just takes a long time or stop working.
No problem with G mail using Internet Explorer or Safari.
I have used Firefox for years and want to go back when I can solve this Vexing problem.Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if this helps when your security software is involved.
-
Satellite A350 - problem with Internet
Hello world
I bougth Satellite A350 with MS Windows Vista Home Premium a few days ago and I have the problem with wireless Internet. It is impossible. I have a connection with my wireless linksys router and that's all. I can't connect to the Internet. I can't get the IP address of the DHCP server, and it is "limited connectivity".
Can someone help me what to do?
I read a few posts on the Forum and I think the best idea is to return to the workshop, grab the laptop and forget to Toshiba for EVER. I hope that it is possible to do. Earlier, I bought a PC laptop Toshiba-No... no problem. Everything is OK, everything works OK, Internet connection without problem.Concerning
Laptop and this card external WiFi use the same standard WLAN?
Have you tested when you set the WLAN on your laptop to the standard G only? -
Hi guys, I have a laptop Caompaq Presario CQ61-313us and I just installed windows 8.1, then I realized there was a problem with my Internet, every time, I opened a website, I always get either a page like this: http://imgur.com/0DtvP9X.png , or I get "error: Gateway Timeout", if I can get on the site if I update a little time , but it is extremely slow. In addition, I can't download anything, I tried to download the .NET Framework 3.5, through windows Update and Windows features, but in vain. I think this proves that the problem is not IE. I also think that it's the fault of the wireless driver, but I don't know, and I don't know which driver to download. I tried to update starting from the meny of properties, but he says that it is up-to-date. My wireless adapter is Qualcomm, Atheros AR9285 802. 11 b | g | n, V3.0.1.155.
Can anyone help?
Update: I think it is worth noting that when I download with utorrent, it downloads normally with my speed of regular download, but to share it, I can't download anything.
Hi Abdoice,
Thank you for your request, I will do my utmost to help.
I understand that you have improved your laptop to Windows 8.1 and now you have problems of WiFi connections.
HP has not tested your unit with Windows 8.1, so this could have unknown results.
If you try another browser is that the same problem?
You did all your Windows updates?
Have you tried running the built in Windows 8.1 troubleshooting tool?
Press the Windows key + C to open the charms
Troubleshooting Wireless type in the search bar and press ENTER.
Follow the instructions on the screen.
Here is a link to the Qualcomm Atheros Driver Downloads page to search for an updated driver. Atheros drivers Download Center
Please note that under the compatible software it does not list Windows 8.1 but only Windows 8.
I can suggest only you try.
There is an update of your system bios on the HP driver page, has it been done yet?
Drivers for laptop PC Compaq Presario CQ61-313US
Here is a link for troubleshooting wireless network and Internet (Windows 8)
Here is a document on download or update of software and drivers for HP computers.
You can omit the HP Support Assistant, it will only search updates HP and there is none for Windows 8.1 as stated previously and also the Manager of recovery for the same reason.
I hope this has helped.
-
Problem with Internet Explorer
Whenever I try to go to the Msn games, I get a warning that says Internet Explore has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).If no joy there's something blocking perhaps.
Start - all programs - Accessores - system tools - IE with no Addons - does this work better?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
Hope that helps.
Rob - bicycle - Mark Twain said it is good.
-
problem with internet connection
Hey... I use my laptop nd I have some problems with my internet coneection... what happened once nd I contacted hp support nd they got my problem fixed... it is I suppose that 4 or 5 months back
And now it's happening again... at first, I can use wifi nd after a certain time, it shows that I lost the connection, then again, I have to connect my laptop in wifi... nd sometimes it doesn't show my internet name... so I start Flight mode then turn off which solved the problem... what happens frequently nd now I'm sick of it... because of this I have to delay my important work...
I try to contact hp support using hp support nd they say contact them using phone nd ask a sort of no. like any series or model. BT I want to have a live chat, as I've done it before nd prefer more talk by phone...
Please answer as soon as possible...
ND, one last thing, my laptop has i5 intel core inside... even then it becomes more heated nd makes sound... I have reduce my workload of the laptop nd files... prob. BT is resolved nt
Thank you
Hello
Was it the power options in Windows by creating a loss of connection? About the thermal shutdown, can be that your battery is defective, if when it loads becomes hot and shut down windows so not to damage components. May I suggest you remove the battery at this point and just run off AC power.
Checkurtech
Maybe you are looking for
-
Card wireless, not seen on Satellite P10 - 874
HelloI have a Satellite SP10-874 (bought in Russia). I have problems with my wireless adapter windows just don't see it. No help, I found the drivers. I read similar messages on this forum, and in most cases, the problem was that the wireless card wa
-
Version 3.6.8 cannot load videos?
I just upgraded to Firefox 3.6.8 and now whenever I try to watch a video on a site like youtube screen is black and he says: ' year error occurred, please try again later. " But when I tried with another browser called Galeon, he played. If I empty t
-
Hello My question is how to scan data using the channel 0 and channel 1 of a digitizer simultaneously. I did two files of VI for this race on 5142 channels 1 and 2 using two different anttenas, but when I run one another is arrested. or when I try 2
-
floating not change at runtime to controls
I have some floating controls on my side because they are located on a cluster. When I switch from mode to mode of execution or run to change, my controls will not go to float on variable not, or vice versa, until I mouse over them, move a window on
-
device Bluetooth not discover my device bluetooth mobile
Bluetooth devices do not work or allows me to add a new wireless deivce.