PowerEdge 2900 - Problema scheda di rete [CF]

Similar Questions

• PowerEdge 2900 and 2950 problems

  I need help please! I know my way around the PC, but I'm lost when it comes to servers. Recently, I picked up several servers which I had planned on setting up in my house. They all came without hard drives, I replaced it, and I was planning on installing Ubuntu 14.04.2 but I'm not one of them to boot from the CD drive. I went through the installation program and made sure the boot sequence begins with the CD, but they don't always work. I even hit f11 at startup up and forced to start from the CD but they say always "no found boot device" or something like that. The first is a PowerEdge 2900 Tower and the other is a PowerEdge 2950 rack mounting. I went through the 80 pages of post on the forum here and couldn't find something that helped. Please help because I don't know what else to do.

  Server 2012 integrated controller drivers, but have you configured and initialized the RAID in the CTRL-R utility?

• PowerEdge 2900 switchable hot

  I have a Dell PowerEdge 2900 running windows Small Business SERVER 2003, we will be taken out of service soon, but we just had a departure by car to go bad - seeing yellow flashes and error on LCD server message: 'E1 H10 HDD1 fault.'   daily backups and weekly regular running properly because of corruption, then I copied the table as a security measure.  I bought a new drive identical to the 4 existing disks that are configured as Raid 1.

  The drive is a:
  341-4430 750 GB 7.2 K rpm Universal SATA 3Gbps 3.5-inch hard drive

  The raid controller is:
  341-5754 1 SAS/SATA embedded RAID 1, PERC 6 / i integrated/SAS6/iR

  Can I leave the server running and pull the wrong drive and drag the new, without running applications before or after this procedure, and will be automatically rebuild the raid?

  I know that I need to replace the server.  But my immediate need is to solve the problem of bad disc, and I'd appreciate any advice or a link to the instructions in this procedure.

  We are a small non-profit and have none of the staff and no budget assistance, or I would have called in help.

  Thank you

  Jeff

  It is a Dell application that will interface directly with the hardware. It must be installed on any Dell server that you manage. On the downloads page, it is called OpenManage Server Administrator - Managed Node, use the 32-bit version.

• POWEREDGE 2900 RAID 10 HAS NOT DEGRADED

  Hello

  I have a Setup raid 10 on a server PowerEdge 2900, Perc 6 / i. There are 4 250 GB drives, set up as a Raid 10. A drive has failed. I tried the disk with a hot swap size even more recent. The server crashed and restarted, Post message showed during initialization F/W and writing degraded disk virtual, but restarting Ok. When I OpenManage it shows degraded and only shows 3 locations of the physical drive page. New drive is orange flashing on the right indicator light.

  Can someone help me with the permutation of the reader?

  Thank you!

  Madmin46

  Is that possible given that the new drive is not a certified dell disk that would cause problems?

  Yes, and that's the most likely cause. Some versions of the AR4 are posted on several PERC controllers. Many times non-certified readers will work fine, but when certified and non-certified are run together, there are often questions... thinking that it is a American, South African and a Pilipino all English - speaking it may be difficult for the three to communicate because they all talk about the different versions of the same language, and language gap can cause problems on a controller which the tolerance of error and delay (patience) are thin.

• PowerEdge 2900 on board sata ports

  I have a PowerEdge 2900 server and would like to put in a single spare 2 TB SATA for additional storage (non-critical).  The motherboard has two onboard SATA, A & B ports.  When I try to connect the drive onboard SATA ports, the BIOS does not detect anything, and when I change the type 'Auto', save the settings and restart settings are not stored in the BIOS.

  I don't know if the SATA motherboard ports supports hard drives, or if there is other reason things do not work.  I tried different cables and tried the drive in another computer, and everything works fine in another computer.  Plan to put in some additional SAS drives in the drive box, I'm looking for an intermediate solution.

  Any help is appreciated.

  Thank you
  Josh

  I've seen this same problem and fixed it. He must go to "Shipped" in the bios and enable "Onboard Sata".

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you

• Dell PowerEdge 2900 - need to use internal drives for RAID

  Hi all

  I am the I.T. guy for small business from my father. I help them on the side.

  They have recently purchased a PowerEdge 2900 server used with 4 internal SCSI drives

  This server also has a Dell SAS 5 / i integrated controller

  I want to install Windows 2008 R2 standard on this server and use it as a file server and a place to host QuickBooks Enterprise.

  The problem, in that I am running is that I can't find in the Bios or anywhere in the server startup utilities where I can configure the 4 internal drives as a RAID 5 array. I want to do this and THEN install the Windows Server operating system. I used the last Build Server utility Dell and also updated all the firmware to the latest versions. The Build Server utility doesn't let me configure the RAID array.  What I'm missing here?

  Thank you very much for your help!

  I upgraded to a PERC 6 / i integrated RAID controller and now problem is solved. Just need a new controller internal RAID.

  Problem is solved!

• PowerEdge 2900 Fans full speed, amber LCD but no text

  I have a Poweredge 2900 which powered on and boots. But fans come to full speed and the front LCD is amber and speechless. He pitied the Remote Access Controller initialization failure. It starts up fine otherwise fine.

  I tried updating the BIOS to 2.7.0 and disconnect all power and remove the CMOS battery. But I can't always clearly the problem.

  What can I do about it?

  Photos here

  http://i.imgur.com/Fh1aDp1.jpg

  http://i.imgur.com/Q3LStpK.jpg

  Hello.

  Speed of the fans of the system is governed by the DRAC/BMC. Attempt to update the BMC http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=C6H4X Else do a soft

  reset the DRAC.

• POWEREDGE 2900 - Perdita configurazione RAID [GRO]

  DELL POWEREDGE 2900 server

  Service etiquette: 82ZCL2J

  Buonasera

  Ho avuto no problem with there server sopra remainder. Non viene più caricato launch Windows. Dopo essere nella configurazione del raid entered, ho visto che non era più any configurazione impostata! (He raid age settato l 1).

  I have brain comunque non hanno personally I dati. Otherwise riconfigurare wanting it raid e vedere is it server riparte.

  Pero mi'd sapere come e stato possibile? It could be he controller guasto? Ed inoltre non having the che non possa ricapitare e possibile auswechseln tell it controller?

  Grazie

  Saluti

  Salve,

  Poter riconfigurare is he raid controller e tutto miss it to content. He reason by cui configurazione TR e persa could not dipendere dalla raid controller, banalmente a riavvio aspettato no la has uno sbalzo di corrente Può generare problemi di questo tipo caso in some.

  There's sono presenti sul nostro sito, especially sulla brain/raid controller firmware news.

  Saluti

• Power supply by DELL PowerEdge 2900 [MS]

  Buongiorno,

  sewn da parte di STUDIO_C, a ' azienda rivenditrice di materiale informatico.

  Avrei need di una quotazione by server UN ad add una seconda PSU Dell Poweredge 2900 dqstayn:

  Grazie.

  Offerta inviata: Offerta Dell n ° client 15487734: IT2881869 - STUDIO_C DI MARIANNA FABRI

  * Offerta offers great al successivo giorno lavorativo (eccetto che in caso di problemi di reperimento parte) con retreat posticipato del guasto *.

  Speaking saluti

  Manual

• PowerEdge 2900 III RAID 10?

  Hello

  I have a server PowerEdge 2900 III with SAS 6/iR integrated (Embedded) and SATAu with two bays of 4 HDD int each Bay.

  I would like to install 8 1 TB SATA HARD drive each and make a RAID 10 for all HDD 8 configuration in total, I will have a 4 TB storage.

  Is it possible to do so as PERC 6/iR has two separate connectors?

  Thank you

  AG

  First, it is important to know what controller you have.

  SAS 6/iR can RAID 0 and 1 (and JBOD).

  The PERC 6 / i can do what you are wanting.

  RAID can be configured through the connectors without any problem.

• Cambio scheda di rete per gestione con vsphere

  HO a 5 free con esxi due schede di rete (vmnic0 vmnic1 e): film di ESXi ha preso come scheda di rete, sulla quale mi connect con vsphere client the vmnic0. So come fa per cambiare questa impostazione is io volgio collegarmi con vsphere client sulla vmnic1?

  Grazie

  Se you you want Mio host anche dalla rete telefoni so, e corretta purche quella VMkernel port sia di tipo management.

  TI remains he problema della ridondanza.

  2 nic brother vanno a 2 switch diversi allo stesso switch fisico o?

• PowerEdge 2900 - size USB drive external Maximum

  Hello

  I inherited the responsibility for a Poweredge 2900 server last year. Recently, asked me to mount a NTFS 5 TB external USB drive.

  This failed with the following message is displayed:

  $ mount/mnt/external_usb_3
  Cannot read the last sector (1220940596): invalid argument
  TIPS: The volume is a RAID/LDM, but it was not yet, the installer
  or it was not setup correctly (for example by not using not not mdadm - build...).
  or a bad device tries to be mounted,
  or the partition table is corrupt (partition is smaller than NTFS).
  or the NTFS boot sector is corrupt (size NTFS is not valid).
  Failed to mount ' / dev/sdf1 ': invalid argument
  The device "/ dev/sdf1 ' is not a valid NTFS partition.
  Maybe you selected the wrong device? Or the entire disk instead of one
  partition (/ dev/hda, not/dev/hda1)? Or vice versa?

  I know the Poweredge 2900 has a limit of drive HARD internal 2 TB because of the PERC5 / i controller. Is this also true for external USB drives? Or is this another limitation HW or OS? I was reading the documentation and found no (or too looked) the answer.

  Is it possible to mount a drive of this size of form/repartitioning fitness?

  Thank you

  Brendan

  I don't think that USB would have this type of prescription, unless there was a problem of driver forbidding him. Material, I would say 'no '.

• VMware esxi5 problemi con the rete. The comments not effettuano he ping back the host

  Hello to all,

  STO sbattendo tested con questo problema da at least due giorni e non capisco causa.

  Macchine comments sound provviste di due schede di rete ognuna delle quali punta ad UN vSwitch (vSwitch0-> vmnic0,-> vmnic1 vSwitch1).

  The prima anomalía sorge quando, tramite vSphere Client clicco sulle info delle vmnic, ed ottengo "Cisco Discovery Protocol is not available on this physical."

  adapter. Typing sulla shell he comando esxcfg-vswitch - b vSwitch0 ottengo two quindi in theory should be abilitato.

  The adapters sono delle Broadcom NetXtreme II BCM5709 1000Base-T network. By material questo ho anche da aggiornamento driver

  downloaded a questo link http://downloads.vmware.com/d/details/dt_esxi50_broadcom_netxtreme_17034v501/dCV0YnRAJXdidGVkZA==

  Unfortunately he problem persists. Some suggestions?

  Grazie anticipatamente.

  P.S. the community of Bella!

  Ciao,.

  da quello che vedo nello schema the vmk0/1 non sono taggate mentre I portgroup delle TR VM: a di seconda come sono gli switch substitutes devi indicare o the vlan corrretta sui vmk0/vmk1o n the vlan dai portgroup delle VM... is not information switch sugli hai substitutes... the ISP had to prove

  Giuseppe

• Problemi esxi4 Velocità rete

  Ciao Ragazzi,.

  Ho questo problema... ho da ufficio di Microsoft it mio primo esxi test. con due macchine virtuali sopra, server win United Nations 2008 ed UN xp. Sulla macchina xp ho da a mail server, ed ha come configurazione di rete indirizzi della dmz (10.0.x.x) mentre windows Server2008 on 192.168.x.x. Tutto ha funzionato egregiamente fino all' film della seconda scheda di rete. Ho deciso di configurare it network in modo da avere due virtualswitch... uno by the demilitarized zone by the rete uno ed interna. Da what punto in poi ho esauriente a notare dei rallentamenti impressionanti sulla macchina 2008. Per trasferire overleaf a customer 50 MB posso impiegarci anche an ora. ORA ho both macchine sullo stesso vswitch. My mi'd understand come meglio configurare mail server it all works it sulla dmz. Use both the NIC knew di a vSwitch e penso solo alla configurazione delle schede sulle internal macchine? oppure devo averne due di vswitch? May vado cosi come lento? Sopratutto. Come con al meglio dei vnetwork options?

  Grazie thousand

  the voce nelle Proprietà network 'port number' come devo configurare? su fifty door? leading to a CSR?

  In base al number of VM che 'attacks '.

  Come gli switch substitutes anche I vSwitch hanno di UN door, have you no can attacking nulla più quello number.

  Andrea