PowerEdge 2900: sostituzione disco

Similar Questions

• PowerEdge R710 sostituzione disco SAS 10 K 146 GB [GRO]

  Come posso procedere a United Nations offer by UN sostitutivo disco take?

  Salve,

  the sto contattando by mail

• PowerEdge 2900 DJWX34J tag: disco sostituzione

  Buongiorno,

  UNO dei brain da 300 GB del nostro Server PowerEdge 2900 DJWX34J e guasto, I would certainly tag. Potete contattarmi UN preventivo?

  Grazie, speaking saluti.

  --

  Marcello Mancini

  Neosperience

  Buongiorno, the sto contattando by mail.

• HDD Sostituzione Server PowerEdge 2900 [SD]

  Ho need di supporto per sostituzione di da a 450 GB 15 k sulla macchina provider SAS hard drive:

  -Dell PowerEdge 2900

  Speaking saluti

  Dear client,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi UN message privato.

  Nel caso in cui as aver need di assistenza telefonica is Pagaré a di COTERMINUSticket.

  SE if need di una delle quotazione left in sostituzione can rates UN preventivo senza Pagaré the assistenza.

  By request, we have our o di need any it client codice di vecchia quotazione o.

  Nel caso in cui non his di queste information times need che compilasse i seguenti campi:

  By the spedizione:

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione (is different)

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

   

  Domenico Severino

• Sostituzione HD by PowerEdge 2900 [MS]

  Salve,
  Dovrei auswechseln UN disco fuori co inserito di UN PowerEdge 2900 (serial number ).
  It modello del disco e he following:

  Seller: DELL
  Product ID: ST3750640NS
  Capacity: 750 GB

  E' possibile avere un preventivo.
  Grazie.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  Speaking saluti

  Manual

• Request Sostituzione disc by server PowerEdge 2900 III [GRO]

  Buongiorno,
  avrei need di auswechseln uno degli hd led raid 5 sul mio Server PowerEdge 2900 III (serial number ).
  He e modello a Western Digital WD800JD - da SATA WD Caviar SE - 75MSA3 - 80.0 GB - 7200 RPM.
  Indicarmi di e price terms could he prezzo?

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione (intervento o):

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione

  1 nome società (o codice client o number order recent):

  Address 2:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

  Fabrizio

• Sostituzioni HD PowerEdge 2900 [MS]

  Buongiorno,

  avrei need di uno degli hd del Server PowerEdge 2900 auswechseln.

  Di is so a Western Digital WD2500YS - 18SHB2 da 250 GB.

  Indicarmi di e price terms could he prezzo?

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione (intervento o):

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione

  1 nome società (o codice client o number order recent):

  Address 2:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA:

  Speaking saluti

  Manual

• Dell PowerEdge 2900

  Buonasera

  avrei need di UN preventivo per sostituzione di UN riflettore ridondante 930W cod.

  DP/N 0KX823 da sul Server PowerEdge 2900 con service Tag 2JS694J fuori co.

  Grazie

  Speaking saluti

  Giorgio Guizzonato

  Buongiorno,

  will one OTS ' email al fine di poter manage the request.

  Grazie

  Marco

• Hard drive SAS 1 TB per Dell PowerEdge 2900 [MS]

  Buonasera,

  avrei di una quotazione by a SAS hard drive need da 1 TB Seagate ST31000640SS da cute in UN Server knew sostituzione Dell PowerEdge 2900

  Saluti,

  Enrico

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione (intervento o):
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge 2900 switchable hot

  I have a Dell PowerEdge 2900 running windows Small Business SERVER 2003, we will be taken out of service soon, but we just had a departure by car to go bad - seeing yellow flashes and error on LCD server message: 'E1 H10 HDD1 fault.'   daily backups and weekly regular running properly because of corruption, then I copied the table as a security measure.  I bought a new drive identical to the 4 existing disks that are configured as Raid 1.

  The drive is a:
  341-4430 750 GB 7.2 K rpm Universal SATA 3Gbps 3.5-inch hard drive

  The raid controller is:
  341-5754 1 SAS/SATA embedded RAID 1, PERC 6 / i integrated/SAS6/iR

  Can I leave the server running and pull the wrong drive and drag the new, without running applications before or after this procedure, and will be automatically rebuild the raid?

  I know that I need to replace the server.  But my immediate need is to solve the problem of bad disc, and I'd appreciate any advice or a link to the instructions in this procedure.

  We are a small non-profit and have none of the staff and no budget assistance, or I would have called in help.

  Thank you

  Jeff

  It is a Dell application that will interface directly with the hardware. It must be installed on any Dell server that you manage. On the downloads page, it is called OpenManage Server Administrator - Managed Node, use the 32-bit version.

• POWEREDGE 2900 RAID 10 HAS NOT DEGRADED

  Hello

  I have a Setup raid 10 on a server PowerEdge 2900, Perc 6 / i. There are 4 250 GB drives, set up as a Raid 10. A drive has failed. I tried the disk with a hot swap size even more recent. The server crashed and restarted, Post message showed during initialization F/W and writing degraded disk virtual, but restarting Ok. When I OpenManage it shows degraded and only shows 3 locations of the physical drive page. New drive is orange flashing on the right indicator light.

  Can someone help me with the permutation of the reader?

  Thank you!

  Madmin46

  Is that possible given that the new drive is not a certified dell disk that would cause problems?

  Yes, and that's the most likely cause. Some versions of the AR4 are posted on several PERC controllers. Many times non-certified readers will work fine, but when certified and non-certified are run together, there are often questions... thinking that it is a American, South African and a Pilipino all English - speaking it may be difficult for the three to communicate because they all talk about the different versions of the same language, and language gap can cause problems on a controller which the tolerance of error and delay (patience) are thin.

• Is - this motherboard for Dell Poweredge 2900 gen. I, or GEN III

  Hi @ all,

  I recently this MB + accessories from a friend and I wanted to get this in life now. But to do this, I need some information about it. If I can get the right processors

  According to my friend, this MB support socket 775 CPU, but according to the data sheet @ dell.com, it supports socket 771 processor. Now, I'm a little confused about the...

  the MB model is: CN-0TM757-13740 - 74G - 0278 REV A01

  I hope that someone can give information me...

  Thanks in advance!

  Greetings from the Germany

  Benny

  I'll add pictures to this post as well

  

  It is a mother Board of generation 1 for a PowerEdge 2900 server.

  Your friend is wrong, the documentation is right (go figure): Socket 771.

  Xeon 5160 is the best processor released for this version of Office.

• PowerEdge 2900 on board sata ports

  I have a PowerEdge 2900 server and would like to put in a single spare 2 TB SATA for additional storage (non-critical).  The motherboard has two onboard SATA, A & B ports.  When I try to connect the drive onboard SATA ports, the BIOS does not detect anything, and when I change the type 'Auto', save the settings and restart settings are not stored in the BIOS.

  I don't know if the SATA motherboard ports supports hard drives, or if there is other reason things do not work.  I tried different cables and tried the drive in another computer, and everything works fine in another computer.  Plan to put in some additional SAS drives in the drive box, I'm looking for an intermediate solution.

  Any help is appreciated.

  Thank you
  Josh

  I've seen this same problem and fixed it. He must go to "Shipped" in the bios and enable "Onboard Sata".

• DELL Poweredge 2900 - disk failure

  Hello

  We have an old Dell Poweredge 2900 our SQL Server database running server.  Last week, we discovered that Raid 5 is degraded and disk 0 disk 1 is seeing completely to the bottom and the poster.  We were already down, so even if we had it running by buying a replacement of the SAS 146 GB 10 k disk we would still be short of storage of data of space.  I bought a SAS Seagate Cheetah 15 k 600 GB ST3600057SS and I would like to replace the failed drive with it.

  Question:

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  (2) my replacement of a 146 GB with a 600 GB can work?

  Please for your advisor as this database server is essential for my operation of the company.

  Thanks in advance

  Hello.

  ISOSA

  (1) open handle is not installed, but want to install.  What version I can use for this 2900 server.

  Download OpenManage Server Administrator v7.4.0.2 form this link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=MGRG4

  ISOSA

  (2) my replacement of a 146 GB with a 600 GB can work?

  Replacing 146 GB with 600 GB of disk drive will not provide any extra space you need because the table will use only 146 GB of total space 600 GB on the new drive. What controller you have installed? In case the only option available for you that your controller does not support the extension of ability online (ECO) could be to backup your data, delete the existing RAID array and re - create another table with the new readers of 600GO. Restore data from backup and re-install the operating system.

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you