PowerEdge R320 cable for SATA?

Similar Questions

• Where can I buy screws for 3.5 "caddy for PowerEdge R320

  My PowerEdge R320 has 4x3.5"caddies at the front. I need screws to fix my hard drives in caddies.

  I can't find these screws anywhere. Where these can be purchased?

  Any decent hardware store. Take a a place like Home Depot to compare to get the right type.

• Installation of Windows server 2008 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  Even I have the same problem... Can anyone suggest a solution?

  Thank you

  Scott

  http://www.vmexplore.com

• New server PowerEdge R320 + 2 x 500 GB

  Hello

  I have new PowerEdge R320 with HARD 2 x 500 GB disc. But now, I'm a little confused how I can install Windows on this server?

  I need, but these in RAID1 mode HARD drives. I checked that mode is SATA and H310 integrated RAID controller is on and I created virtual disk RAID1. But when I run the install with Windows 7 or 2008 R2, I can't find the HARD drive more. I tested a lot of driver that I can found in the support site, but nothing.

  If I change the SATA RAID mode then I can use H110 virtual RAID? But I can't create it virtual disk or RAID1. There I found the drivers, but I can't then do RAID1.

  So what I missed?

  You need drivers for the H310:
  http://downloads.Dell.com/FOLDER02416328M/2/SAS-RAID_Driver_W2K8R2_D5N8T_A06_6.802.21.00_ZPE.exe

  Download and run it to extract the files before use, then put the files on a USB flash drive and click on the link to load the driver on the Setup screen where readers would normally be disclosed.

  Let onboard SATA mode SATA or ATA (non-RAID) - it is only for the DVD player.

• Installation of windows server 2008 R2 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  PS: I posted the same topic in the forum "Blade" by mistake. Apology.

  "Do you mean that if my BIOS/SATA configuration has been set to RAID 1 I should have drivers chipset/AHCI for a successful installation?"

  No, because you are not using the onboard SATA RAID - your built-in SATA is used ONLY by your optical drive, so it should not be in RAID and AHCI usually requires special drivers, which is not required when you use optical drives.  However, pilots of chipset/AHCI may have helped Windows to see the optical drive in such a way that the installation could proceed (if she needs the RAID controller for real hard disks, you will NOT see this particular message - you will see another message when Windows cannot find not all drives to be installed on).

  "When someone would set RAID 1 for sata configuration?"

  ONLY if you use the S110 RAID controller onboard.  You use the H310, so you don't want to mess with the SATA RAID on board.

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Need cable for Tablet P3500, use the recovery CD

  I have a Tablet from Toshiba P3500 and map an external cd drive of rom with the 32-bit bus cable to connect, but the recovery cd requires 16-bit card bus card which, if I had one, I've lost.

  What is the part number for a 16-bit bus pass card and cable for my tablet, and where can I buy a.

  The Tablet is about 2 years.

  TIA
  Mac

  Hello

  The reference is PX1056E-1NAC.

  Nick

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• What is the point number (spare part) protects cable for ILÇE-7RM2?

  What is the point number (spare part) protects cable for ILÇE-7RM2?

  I'm looking for this part:

  http://Helpguide.Sony.NET/ILC/1520/v1/de/contents/image/b_cableprotector.PNG

  Thank you

  Michael

  I discovered, that it is the part number:

  Cable protector: X-2591-933-2

• Need of touchpad ribben cable for Equium A200 - 26 d

  Need touchpad ribben cable for Toshiba Satellite A200 - 26 d, on cable reference number: NBX00004G00

  Any ideas please.

  p. s.

  I tried google and ebay

  Hi mate

  Compatible and supported Toshiba laptop everywhere could be ordered in a Toshiba ASP in your country.

  Here you can find the database with all FSA worldwide:

  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  Welcome them

• Need a DVD/CD-RW player in-house for Sat Pro 4270

  I have asked this before, but did not drive
  I need a drive DVD/CD-RW internal for Sat Pro 4270
  Can anyone advise a specfic drive that will work

  Hi Charles,

  Please check the following URL: - (click on DISKS for information.)

  http://www.morsenet.com/www/frameset.asp?top=end_user.htm&main=http :// www.morsenet.com/www/drilldown.asp?node=464437

  Kind regards

• Satellite A200-1 g (PSAECE) Win XP. Need drivers for SATA HDD and GeForce 7300

  Hi all.
  I would install XP instead of Vista on my note. As far as I know, XP has no builtin for SATA driver. I found no drivers for GeForce 7300 on the toshiba Web site. So I need drivers for SATA HDD and GeForce 7300. Where can I find them?
  Thank you.

  Hello

  Why must you SATA XP drivers? You are not able to install XP because the HARD drive is not visible?

  With regard to the nVidia drivers:
  It seems that the A200 notebooks were shipped with a different hardware configuration.
  Some laptops come with the Intel GPU and some with nVidia graphics card.
  The Intel GPU driver is available on the Toshiba page.

  Graphic driver nVidia can be downloaded from the site Web of Toshiba Canada or 3rd sites like www.omegadrivers.net or www.laptopvideo2go.com

  See you soon

• ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK

  I CAN'T ACCESS INTERNET ON H P TAB 7 TAB (VOICE) VIA A USB CABLE FOR MY COMPUTER NETWORK. PLEASE HELP ME.

  Hi AR7, welcome to the Forums of HP. I understand that you can not connected to the Internet. HP offers no support for this configuration, as a result, here's the method to connect to a WiFi network.

  Connect to a wireless (Android KitKat, Jelly Bean)

• camera / computer cable for PowerShot A1100 IS

  need to reeplacement camera / computer cable for PowerShot A1100 IS - no available on the Canon Web site - do not offer Office Depot where I bought the camera

  Hi watson1943!

  Thanks for posting!

  The specific cable supplied with your camera is currently unavailable on our website.  However, the cable is a standard type of cable that can be found almost everywhere.  Both an end has enlarged type connector and the other end has a mini type B connector, it should work.  You can try one of your local electronics retailers to see if they have such a cable in stock.

  It has not responded to your question or problem? Find more help contact us.

• Where can I buy a usb key with thin cable for A500 for cell phone charger?

  Where can I buy a usb key with thin cable for A500 for cell phone charger? Or I can do?  Thanks for any help.

  The A500 uses 12VDC to load. USB use 5VDC. You could do a cable, but it wouldn't work because of differences in voltage. Sorry...