PowerEdge T410 won't do anything when you press the power button / stop.

Similar Questions

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• My his laptop makes a beep when I press the power button / stop and it does not start

  Hello

  I bought a new Dell Inspiron 15z touch ultrabook and when I pressed the power button, it starts to beep and won't start. The screen is totally blank. What should do? Help, please

  -Mayur gala

  Hi Mayur,

  Welcome to the community,

  Sound signal can be used as a diagnostic indicator. The computer may emit a series of beeps at startup if errors or problems. This series of beeps identifies a problem and is called "beep code".

  See the table below which shows the beep codes and the possible problem:

  Overview of beep Code
  Beeps	Description	Possible cause
  1	ROM BIOS checksum failure	The map system, covers BIOS corruption or errors ROM failure
  2	No memory (RAM) detected	Memory or memory slot failure
  3	Chipset error (North and South Bridge error) Time-Of-Day Clock test failure Gate A20 failure Super i/o chip failure Keyboard controller failure	System board failure
  4	Memory read / write failure	Memory failure
  5	Real Time Clock (RTC) power failure	CMOS battery failure
  6	Video BIOS	Video/smart card failure
  7	Failure of the CPU	Processor failure
  8	LCD SCREEN	Failure of the LCD

  Let me know if you need assistance.

  Thank you

• Tecra A4 does not light when you press the power button

  When I press the power on button it turns green for 4/5 seconds then turns off.
  "I do all the tests the support on the page:
  
  * Press on and press and hold the Fn key and press the F5 key repeatedly. If an image appears on the display, this indicates that the image has been activated to a connector for a monitor outside, causing only appear to be off the computer.

  * Connect the adapter to the computer.

  * Remove the battery and unplug the AC adapter and then connect only the AC adapter. Make sure that the power adapter is one that comes with the computer. Try to turn on the computer again, without the battery in the computer.

  * Plug the power adapter into a different plug.

  * The battery, ensure that there are enough energy to start the computer.

  * Press and hold the power switch for 10 seconds (to make sure that the computer is turned off). Wait five seconds, and then tap on and again, hold the switch for three seconds (turn on the computer).

  * Ensure that nothing beats (a sliding plastic cover) in the path by pressing the power switch.

  * Disconnect all devices (printers, pointing devices, keyboards, etc.) connected to one of the ports on the computer.

  * Remove any additional memory, beyond the computer built in memory, or the first module of memory in the computer. If the computer starts correctly, reinsert the memory and turn the computer back on. If it does not start successfully, memory can be inserted incorrectly, it may be defective or the support of memory may be damaged. "Try to replace the module memory."
  In vain:]

  You know? THX

  Hello

  There must be a hardware malfunction.
  You have tested a lot and nothing has worked
  I think there is not much to do, you all tired and I guess the authorized service provider could help you

  If your warranty is valid all should be done for free, so don t you worry and ask the experts ;)

• Screen flashes on then off quickly when it is locked and you press the power button / stop?

  Using iPhone 5s, I bought this phone a week ago.

  Facing this problem since this morning.

  Try a forced reboot. This will affect all the data. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• HP DV6 6115TX UP STARTS NOT WHEN I PRESS THE POWER BUTTON / STOP NOTING HAPPENS

  LAPTOP: HP DV6 6115TX

  1. WITH THE BATTERY AND CONNECTED AC-

  WHEN I PRESS POWER BUTTON NOTHING HAPPNS ONLY INDICATOR LIGHT NEAR THE POWER SUPPLY BECOMES WHITE AND STAYS ON UNTIL I HAVE TO REMOVE THE BATTERY.

  2. WITH THE BATTERY ONLY

  WHEN I PRESS POWER BUTTON NOTHING HAPPNS ONLY INDICATOR LIGHT NEAR THE POWER SUPPLY BECOMES WHITE AND STAYS ON UNTIL I HAVE TO REMOVE THE BATTERY.

  Hello @HPDV6-6115TX ,.

  Welcome to the HP Forums!

  I understand that you laptop is not turning on.

  If the laptop has no power, other than the AC adapter connection indication, there is little that can be done.

  The adapter ring is HQ shows a white LED would suggest the adapter supply fine and offer pay-per-view mother, or at least the internal power connector. This means it is a flaw in the motherboard of the laptop and most likely requires a repair.

  You will want to check that the RAM and HARD drive are in place and connected, as well as internal power cable. You can do it by following your product Maintenance & Service Guide.

  HARD drive: Page 62.

  RAM: Page 66.

  Power cable: Page 83.

  If it does not, you will need to contact the HP support by phone for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Hope this helps!

• HP-G62226TU: my laptop won't turn on when I push the power button

  Hello

  My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

  My laptop is 2.5 years old and was working fine without any problems so far.

  Please suggest.

  Thank you

  Himanshu2303 wrote:

  OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

  What do you suggest I should do?

  How much will it cost in India?  I have no idea. I live in Europe.

  I suggest to ask a repair shop of PC or laptop.

  If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

• A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  Select the text and use the Warp tool to give a fake italic.

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• ElliteBook 8460p will not be running when you press the Start button

  Hi Ant classmates.
  
  I am facing a problem with my 8460p ElliteBook. When I press the Start button it won't start and I need to apply some mechanical vibrarions so he reacts to the button. I guess that there is a problem with a connection inside. The thing is that he does not always fail, but it happens more often. I'm afraid to send it to HP support and resume with a message like "the problem didn't see the - up." I'm close to the date limit of warranty, but I need my laptop for 3 more weeks for professional issues. What should I do?
  
  Thank you

  Hello Angelica,.
  Welcome to the HP Forums.
  
  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can click here for the link.
  http://h30499.www3.HP.com/hpeb/
  
  Thanks for posting on the HP Forums.

• IPhoto crashes when you press the info button

  Since very recently, IPhoto crashes every time when I press the info button to enter people information a photo. I have version 9.4.3. running on OSX version 10.8.5. I added the first lines of pages and the pages or error report, if that can help anyone. I tried to repair the basis data, but without success. I am very grateful for any advice on this issue.

  Process: iPhoto [552]

  Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto

  ID: com.apple.iPhoto

  Version: 9.4.3 (9.4.3)

  Generation information: iPhotoProject-720091000000000 ~ 1

  App item ID: 408981381

  The external application ID: 15017489

  Code type: X 86 (native)

  Parent process: launchd [139]

  User ID: 501

  Date/time: 19:50:47.475 2016-01-04 + 0100

  OS version: Mac OS X 10.8.5 (12F2560)

  Report Version: 10

  Interval since last report: 34492 sec

  Crashes since last report: 3

  Per-App interval since last report: 905 sec

  Per-App crashes since last report: 3

  Anonymous UUID: 23235B01-625D-2A47-6A8F-352C3092B10A

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000c53b6a10

  If you use iPhoto 9.4.5 or an earlier version, iPhoto will crash whenever you try to use maps. It is no longer supported.

  See:

  The first versions of iPhoto 11 started to plant for many users suddenly last month.

  There is a problem with the functionality of the site, because Google maps will no longer be supported.

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

• Audio jack play and pause/stop when you press the various buttons

  Hi all

  I do a simple radio interface and I have 6 buttons which I want to have that specific preset song playing of the button located in the library screening and stop/pause the current song when you press any preset button.

  I tried to use the attachSound, with associated identifiers but don't know if it's the right way to go. He plays songs, but does not stop their...

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
  
  PlayFM1_1 = new Sound (this);
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
  
  }
  }

  
  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
  
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
  
  }
  }

  then I tried just to put each piece in its own clip and using this code, but it still doesn't stop/pause the song.

  Stop();

  {mc_preset1.onRelease = Function ()}
  mc_song1. Play();
  mc_song2. Stop();
  }

  
  {mc_preset2.onRelease = Function ()}
  mc_song2. Play();
  mc_song1. Stop (1);
  }

  Does anyone have any suggestions? Any help would be great! Thank you!!!

  Basically, I just need to know how to do the supported mc or button to STOP / to PAUSE the song that plays

  Thank you!!!

  -PAt

  the sound class has no property of break.  It has a stop() method, you must use:

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
         
  PlayFM1_1 = new Sound (this);

  
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
         
  PlayFM1_6.stop ();
  PlayFM1_5.stop ();  etc.
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
         
  }
  }

  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
         
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
         
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
         
  }
  }

• Satellite C series - cursor will move only when you press the trackpad button

  Cursor on my mousepad suddenly stopped moving unless I have push button left or right, the cushion itself is not locked (fn + f5).

  Please help this is driving me crazy. I tried to uninstall drivers and reinstall but still will not work

  This behavior is very strange.
  Can you please tell us which model of laptop you have, what OS you are using and since when did you notice this problem?

  You use an external mouse at this time?
  When you open Mouse Properties try please use option restore all default values.
  If the problem persists, you can try to reinstall OS (recovery image) and test the functionality with the factory settings.

  In the case that the same problem my only explanation is that must be material junk.

• Videos a pause when you press the volume buttons

  Hi, I have a problem while watching videos on YouTube or not... When I use the high and low volume keys, the video stops without reason and I find it so boring... I think it started about a month ago... Can solve us this problem? Thank you

  @Ehabg

  As I thought, the problem its caused by a third-party application, not a preloaded app, you need to uninstall app by app until you find the culprit.