Powering sbRIO equipped of a DC/DC converter.

Similar Questions

• Cannot convert a virtual machine while it is powere on or suspended. Shut down and power off the virtual machine before the conversion.

  Hi all

  I am currently using preinstalled VMware 7.1 and I try to import a virtual machine, I used to work on my windows XP. Recently, I am using windows VISTA and I am trying to import my VM (.vmx) and I get this error "cannot convert a virtual machine, although it is powere on or suspended. "Shut down and power off the virtual machine before the conversion.

  This virtual machine worked very well under windows XP and VMware 6.5, but now I am not able to import it. Please suggest how I can make this virtual machine running in my VISTA and vmware 7.1.

  I am also attaching the converter file logs and .vmx vmware.

  Thank you...

  Is there a problem with this backup?

  It is possible. How big is she?

  Right-click on the vmdk file in Solution Explorer, then select «Map virtual disk...» "Does it work?

  André

• all of a sudden I can't add images pro go to my fcp schedule.  I did it in the past. using the same equipment... has changed a parameter? How can I return to the addition of the sequence of gp without converting them?

  Once a year, we build a loop to show out of our images. I use the same camera, go pro, same computer, same fcp, BUT this year it won't let me add the pro images go on my calendar to my G-Drive.  I tried to convert it and even if it works... it is very time consuming and frustrating because it was so easy in the past.  ANY IDEAS on if I have accidentally changed a setting on FCP? or on my GP PRO? I read that you have to convert, but why I did not in the past?

  so frustrated... not computer savvy...

  TIA!

  What happens when you try to import the clips? You get an error message? The files are selectable in the import window?

  Russ

• Processing of data of a converter A/D (standard equipment)

  Hello

  After a lot of research and reading - I finally ask the beginner question.

  How can I manage collected data (String) HEX to decimals converted in the

  example "Advanced Serial write and Read.vi ' to be displayed in a field or stored in

  a table?

  Here is the configuration:

  I have a very fast 10MS/s A/D converter, which is controlled by a virtual COM port.

  For the initialization and the trigger, orders are send as strings followed a.

  The data is immediately stored on on-board FIFO memory with a sample of 4096

  size. The data are transmitted as HEX strings with a maximum of FFF (which is equal to 1 V)

  and a minimum of 000 (equivalent to 0 V).

  Communication with the converter works very well. The data are taken from the FIFO

  with a while loop (4096 times running) and the unique data values seem to agree.

  But now I have the problem of the 'mix' of a group of data that can be displayed

  or stored for manipulation later...

  Please give me a hint!

  Sincerely

  Christian

  Hi Christian,

  you don't need the loop for. create the shift register on your loop. See the image as an attachment.

  Mike

• My new 23 Pavilion is equipped with software that plays music CDs and converts them to MP3

  Well the title says it all. I have a new Pavilion A6 VISION AMD 23

  I wanted to play a music CD and the melodies were converted to MP3 on a flash or on my Motorola Xoom. Let's just say a flash drive for now.  What is the procedure?

  Can I save and save it somewhere first and then convert them?  The 23 Pavilion comes with software that does this? How about Realplayer or Media Player? I also have the Cyberlink Media Suite together.

  Please consider my request!  Jack ":-D.

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the back or bottom of your computer. , Please do not include your serial number.

  Using Windows Media Player... in general, you insert the CD and the rip of the songs (or all tracks) in the music/media library. After you are done the ripping, you can copy files to a USB stick or other storage device.

  Please click the White Star of KUDOS to show your appreciation

• Can't access file system host (MAC) shared in VMware vCenter Converter Standalone Client when wanting to create a VMware image (Windows 7 in Parallels virtual machine running on a MAC) for the option of machine Powered On.

  File HOST (Mac) system is currently shared in the Parallels virtual machine and is accessible through Windows Explorer and works correctly in the Virtual Machine environment, however, after installing vCenter Converter application on the Windows virtual machine these shared folders are not accessible from the conversion tool in the selection of the target destination of the file VMware (s). I can't select an existing folder on drive "C:" to write the image so that there is not enough space available for the VMware image and it must be written in a different file system, while the image is being created.

  Anyone know a way around it to show the target to write the image on the host (MAC OS) file system or is it a bug?

  Thanks for the reply.  It seems that the maps are not displayed if they were created as actions by the hosts.  When I created a mapping directly from Windows, then this mapping appeared and the conversion worked fine.

• Try to convert powered on Win2k3 - SSL error EOF - host certificate isn't complete

  I'm tempted to convert the Win2k3 Server physical to virtual (ESX 4.1).  When I try connect to Win2k3 box,-Error Converter:

  System general error ssl unexpected exception of folklore

  I looked through the papers and found this:

  Certificate of host is not complete.

  I searched through the KB articles and google and can't seem to find a solution.  I tried to connect directly to the IP address, FULL domain name and turn off SSL checks in advanced settings - will still not...

  Any help would be appreciated.

  Thanks in advance,

  Bill

  I ran into this problem today and found this possible solution for you (it fixed for me);

  When you connect to a server using VMWare converter, the tool tries to query the target server using a number of methods, including the attempt to try to connect to any existing VMWare converter agents on the target system.  The default port for the agent of VMWare converter is 9090.  If VMWare converter can connect to the machine, but gets no response on port 9090, it should then proceed to ask you if you want to deploy automatically converter on the system agent target for you.

  In my case, something else on the target server was already using port 9090 and this confusion VMWare converter giving the error that you have described.  Your two choices are to temporarily disable the software using 9090 or manually install the agent converter, choose a different port during the installation wizard. If you choose this last option, don't forget to specify the port to connect to when you try VMWare conversion again, using the format (for example server01:9091)

  I hope this helps!

  --

  Mark Lomas

• Autonomy of the powerful transformer vs. OK to use?

  Hello

  We all charge our Apple devices in a variety of ways: through the port on laptops to 5W low USB phone wall adapters for iPad adapters. At the present time, I have a combination of gadgets with their own adapters; the most powerful is the 11W one for my iPad Air. Because now I have so many devices that require simultaneous Chargers, I thought I'd do a couple of additional adapters, probably one for the large iPad (15W). I can also convert a couple of wall sockets. These outputs 2. 1A @5v it is 10W. Here's my question:

  I know that a device will draw only enough juice for its own needs and so there is no problem to use a 15W for an iPhone adapter for examples. However, I also know that the low amp load is better for the life of the battery (for example load 200mA only AA batteries for example). Are Apple devices 'smart' enough to regulate how they charge? Or if you only use the amperage/power appropriate for the device in question?

  Thank you!

  devices iOS charges to 80% at full power, then unmold to a trickle charge.

  See this--> http://www.apple.com/batteries/why-lithium-ion/

• Project school convert to battery

  I'm working on a project for school and I want to convert my wifi extender that I plug it into the wall for a device powered by portable. I can't find anything about it. I can't even find exact power for the Netgear WN3000RPv3 requirements. Can anyone help point me in the right direction?

  Then open the unit find the point where 120V AC is converted to DC voltage.

  One is pos (+), the other is neg. (-) if possible a copy of the schema

  is the best but if it is not possible, you can draw diagrams, read the PCB

  traces and screen printing. Most likely it is 12V DC.

• Powered USB does not load

  Hello

  Can someone help me? I have a Yoga pro 2 and the powered usb port had to work as a charger, even with the laptop is turned off, but it works just with the computer, I already tried to change the options of energy suspension selective USB as I have in Device Manager, deselect the ' computer can turn off the device to save power. , but nothing worked! Helpppp

  Link to photo

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

• sbRIO-9651 IO corresponding length

  We plan to interface high speed ADC (1gech/s x8bit) that uses a wide interface LVDS (two samples) from 16-bit to a sbRIO-9651.  Is there a resource that provides information about the sbRIO-9651 module layout details as worst case length offset series in differential pairs and between differential pairs that exist on the module (independent of our own layout of the Board of Directors)?

  Since the interface use a common differential clock and wide 16-bit interface, I'm trying to get a sense tilt the worst case there might be between pairs differential seperatate.

  I can they use sheet date architecting to get an idea of the maximum transfer rate, but are there restrictions on the module itself that will limit rates date?

  Hi abadobid,

  The SbRIO-9651 manual specifications (table 8) should have the details of length sur-module trace info you are looking for.

  In addition, I recommend reading the Design Guide for the SOM carrier for detailed techniques, guidelines and requirements for the design of carrier card.

  Finally, for future issues are the design of specific equipment for the SOM, we have implemented a dedicated community/forum that will probably be the best place to get help.

  Community of developers of hardware for NI Single-Board RIO and module system

  Resources for the system OR on the Module

  Kind regards

• Is it possible to set the time on a device in real time so that the time will persist when the device is not powered?

  It seems that you can not set the time on a device sbRIO (9606) and have always the exact time when the card is powered after not being fed for a while.  I have a product which will be independent (not connected to a network) when it is supplied by the customer.  I would like to collect data in a datalog and would like to put a timestamp somewhere so that I can understand when these data were collected.  If I can't get an exact date/time, then the next best solution would be to set up my datalogs so that I can at least understand the exact order in which they were collected.  (I think I can understand it without much problem)    Any suggestions as to best practices?

  Hey John,

  Without connected VBat time will not be preserved between periods of closure. Unfortunately for the 9605 and 9606 we have not a way to date the connector 9693 VBat.

  How much sbRIOs you plan to deploy with your system?  9623 and 9626 have a compartment for the RTC. If you haven't bought your sbRIOs already you could focus on the options of the form always match.

  If it is necessary to have retention time between stops, we would need to understand the extent of your application more.

• "For more specific class" does not not on sbRIO 9636

  The application that I am forcing me to programmatically access arbitrary components of a nested group. Currently, I am doing the browsing the cluster using his property [] node recursively controls. Currently, my accessor VI to accomplish this works very well on a normal PC but does not work on my target in real time, a sbRIO 9636.

  After some research, I determined that the function "To more specific class" does not work on my target in real time. I have attached a code base that shows the heart of the problem. It works fine on a PC but will return an error 53 when running on my target in real time.

  

  A few questions:

  (1) is 'To more specific class' supported on the sbRIO 9636 or not?
  (2) if it is supported, what am I doing wrong?

  (3) if it is not taken in charge, what are other methods for access by the arbitrary elements of a nested cluster program?
  (4) if it is not supported, why LabVIEW allows me to place the feature even when the sbRIO 9636 is explicitly selected as my goal in my LabVIEW project? It seems prudent to restrict its use, if it is not supported. My day job has been effectively wasted because of this problem.

  For reference, here's a few previous discussions

  http://forums.NI.com/T5/real-time-measurement-and/modifing-cluster-component-properties-on-sbRIO-No-...

  http://forums.NI.com/T5/real-time-measurement-and/quot-Manager-call-not-supported-quot-when-typecast...

  Thank you
  JAnthony

  The other posts are correct, because it is currently not possible to use the function on a real-time target. This is a known issue and is being investigated for correction, but currently there is no work around. It is available on the pallets that this behavior is not intentional and should work.

  You have described your application requires that recursively through a table and access to specific data. Does this mean that the Data Structure might be different when the vi is run and you need to adapt to a changing data type? If this isn't the case, then all you need to do is to get the value of the reference and then ungroup the cluster as needed then store the changed values to the same reference.

  If you're going to have to settle you will encounter difficulties to be determined pragmatically you should do but I have a suggestion. Create a cluster with an enum and a Variant. You can use the enumeration to set the type of the variant in question. He chooses the type to convert the variant according to the code. It is a similar structure, like messages in queue manager and his messages that happening except that you will be passing a reference to this group that has both the message and the payload in one. The reference could be used to get the value and then the code must only be written to accept the Cluster of Enum and variant you can then convert the variant to the appropriate type for later use. For best performance, you also use in Place of the Structure element.

  It's only a means potentially accomplish what you want. If you describe your program and needs more in depth, we are able to offer a more suitable solution for your application that does what you need. I wish you a nice day!

• I2C SBRIO

  Hi guys,.

  I use a SBRIO-9611 to control a few shavings DAC using I2C. I did some research and found the link below.

  Unfortunately, I'm using 8.5.1 both for my FPGA software and in real time.  I need a kind soul help me downgrade 8.5.1 code so I can open it.

  Thank you

  Ray

  https://decibel.NI.com/content/docs/doc-1151

  Hi Ray,

  Here is the converted project

  Concerning

• sbRIO-9632 5V Pin current (source)

  I'm working on a robotics project and I just got the Robotics Starter Kit (DaNI).  It seems that there is two encoders pins 5V on the sbRIO-powered (but I can find no plug on encoders and present how they shoot).

  I need to know if I can use the pins 5V to power the encoders that we use.  There will be, at a minimum, 3 of them on the robot at any time of the command of feedback on our custom engines.  Each of them says he'll shoot 27mA which is 9 times the amount of current that can access a normal DIO PIN.  I'm assuming that the 5V pins can do more, but I don't know how.

  So, now how can the 5V several pine source?  If she can't get enough, can I, on my board custom in small groups, provide an external 5V regulated?

  P.S. These can be used to power other sensors like accelerometer, gyroscope, etc..

  Nathan,

  5V on the sbRIO lines can virtue combined a total current of 2A.  There are more details on page 25 of the Manual.  Note that on the robot servo motor is already powered by 5V line.  In my view, that it takes something of the order of 100 to 200 my.