Powerplanes - cannot select the layer
With the help of Utiboard10.0. Council of layer 2. Had powerplanes on layer up and down. Necessary to make a small change and removed two power plans. Fact my change and I tried to put the powerplanes back, but I'm locked - can't select layer but can select net powerplane attached too. Many remote islands were left after the removal of the two powerplanes and remove all, still no help.
Hi rich,
I removed the power of the design plans. I hope this helps.
Tags: NI Software
Similar Questions
-
Cannot select the layer via CTRL + ALT
Hello
If my memory is good, in CS3, I could ctrl + click on the layer alt while using the Brush tool. I can do is more in CS4. To do this, I first have to click on the selection tool, and then ctrl + alt click an image to select its corresponding layer, which is not a time saver. In any case, am I doing something wrong or avoid to activate certain features? Thanks in advance.
Select the move tool and make sure automatic selection is checked and it is set to layer in the Options bar. To select another layer simply Ctrl + click on it in the document (no need to the ALT key). Is that what you want?
-
Cannot select the device scanner, AIO F380, MacBook Pro
Cannot select the device scanner, AIO F380, MacBook Pro
Thank you, Sean. I found out what I needed to know to fix the DIF from a document from hp customer service. I was able to fix by restarting, it is to unplug the usb cable first from the printer, wait 5 seconds, plug the cable back in. Then I desconnected the cable from the computer, wait 5 seconds and plugged.
Duh!
Thanks for responding.
-
Cannot select the drive (NAS) on Windows Media Center
Original title: cannot select the drive (NAS)
My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet. The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC. In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option. What can I do to get the WMC to see the SIN? Is there another setting of mapping I should use?
Also, as a side note, there is no option to change the quality of the recording at all. Installer below. If any other information is needed, let me know.
ASRock m - itx E-350 APU/MB
Kingston SSD now V series SSD 30gig
Western Digital My Book Live 2 TB
Cisco/Linksys E2000 Wireless N Router
PCTV usb TV Tuner (HD capable) with on the HDTV antenna
Win7 PremiumRecord TV directly to a network location is not supported.
You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195
-
Cannot select the Dictionary view user USER_TAB_COMMENT?
Hello.
I have this weird problem in 11.2.0.3
I cannot select the view of the USER_TAB_COMMENT of a user dictionary, but others can.
If I try to describe it, I get ORA-00942 and ORA-04043 messages.
Here is my attempt. I create a comment on a table, try desc or select the view from the dictionary. Then connect with SYS and select the comment in the view "dba" to check if the comment was created:
Other users, I don't have this problemSQL> conn RODOLFO Introduzca la contraseña: Conectado. SQL> show user USER es "RODOLFO" SQL> comment on table DOCUMENTILLOS is 'This is a comment'; Comentario creado. SQL> select table_name, comments from user_tab_comments; select table_name, comments from user_tab_comments * ERROR en línea 1: ORA-00942: la tabla o vista no existe SQL> desc user_tab_comments; ERROR: ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe SQL> desc all_tab_comments; ERROR: ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe SQL> conn / as sysdba Conectado. SQL> show user USER es "SYS" SQL> select owner, table_name, comments from dba_tab_comments 2 where owner = 'RODOLFO' and table_name = 'DOCUMENTILLOS' 3 ; OWNER TABLE_NAME ------------------------------ ------------------------------ COMMENTS -------------------------------------------------------------------------------- RODOLFO DOCUMENTILLOS This is a comment SQL>
Clues why this is happening?SQL> conn MANOLO Introduzca la contraseña: Conectado. SQL> show user USER es "MANOLO" SQL> comment on table DOCS is 'This is a comment'; Comentario creado. SQL> select table_name, comments from user_tab_comments where table_name = 'DOCS'; TABLE_NAME ------------------------------ COMMENTS -------------------------------------------------------------------------------- DOCS This is a comment
Kind regards.elvegaa_esp wrote:
What do you think?OK, the question is in the place where he is not pointing?
Edit:
Oh, it looks that it points to dba_tab_comments. Since your original post:desc user_tab_comments; ERROR: ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
Who do not have the right of Rodolfo.
Thus, final to get rid of him.
And a good thing that you do not 'go to your DBA"as suggested. It was just to choose the wrong solution to an unknown problem.
Concerning
PeterPublished by: Peter on March 11, 2013 08:49
-
I'm on Snow Leopard 10.6.8 Photoshop CS3 10.0.
Is it possible to click only once with "V command" to select a layer in a group?
I used to be able to do and on my laptop I can do now (same OS and Photoshop), but the mac that I use for my design work won't... I must also, right-click and select the layer highlighted. I have a document a lot of multilayer Photoshop with many groups, and it is an extra step of your time.
Is there a preference I can turn on? Or some other simple typo?
Thank you very much!
Select the tool move and set the options of the control bar. By default, it took to select a group, simply change layer.
-
Select the layer function in action
I have three layers with text in different languages. I want to record in three different PNG files.
I tried to do action, select the layer, hide it and save it. Select another layer, then do the same thing. But the selection of layers is not saved to the action.
Is there a solution?
big thank you
No, I don't think. The selections are what they mean - interactive decisions which provide a context for a tool or a command. What you would require a script, and even in this case, you have to take care to name the layers properly in the first place...
Mylenium
-
I'm come white with the verbiage and spin my wheels with OMV guide and script.
var myOriginalLayer = app.activeDocument.layers.item (0);
Alert (myOriginalLayer)Returns "layer object" and not the name of the layer.
var myOriginalLayer = app.activeDocument.layers.lastItem () .name;
Returns the name of the layer I want but not by choice.
I am challenged on how to select the layer.
Hi John,.
The difference lies in that the [Object Layer] is the real object, and the 'name' is a property - like color.
You can use one of these two approaches:
var myOriginalLayer = app.activeDocument.layers.item (0);
Alert (myOriginalLayer.Name);hosts the original layer object, and you can see the name if necessary :-)
For re - select the layer, use
app.activeDocument.activeLayer = myOriginalLayer;
You can also select name goes like
var myOriginalLayerNAME = app.activeDocument.layers.lastItem () .name;
...
app.activeDocument.activeLayer = app.activeDocument.layers.item (myOriginalLayerNAME);
I also noted the following:
app.activeDocument.layers.item (0) points to the first layer of your document; not the 'active'. Similarly, app.activeDocument.layers.lastItem () points only to the very last. I don't know if the order of the activeDocument.layers array mimicks the order as shown in the tags palette, but I hope for it :-)
To get/set the active layer, use app.activeDocument.activeLayer as shown above.
-
Cannot select the text to change
I inherited a document and I can't change the text on a page. I tried the different layers but cannot select same text.
I use CC 2014.0
Brian
Is the text on the master?
It is on a locked layer?
The text block is locked?
Something is above the text frame?
-
I need to select a specific layer or group by name. What is the correct syntax to do this with Javascript?
you want to select all the items on the layer? or only some types (e.g., blocks of text, groups, paths)?
Let's take a look at the same time.
Let's start by selecting all the elements on a given layer (in this case the layer is called "Target layer");
Note that pageItems means that any element of art in the document. could be text, could be a path, can be a group, could be a compound path.
var docRef = app.activeDocument; var layers = docRef.layers; var myLayer = layers["Target Layer"]; //this defines the layer that you want to get the selection from docRef.selection = null; //ensure there is nothing in the document selected already. this way you only get the selection you want. for(var a=0;a
now lets do the same thing, but we will choose just the groupItems
var docRef = app.activeDocument; var layers = docRef.layers; var myLayer = layers["Target Layer"]; docRef.selection = null; for(var a=0;a
and finally, in order to be comprehensive, allows to select two different types of art objects, but not all types. For example, if a single layer has text blocks, groups, paths and transparent traces. Let's just select managers of related texts and groupItems. This time we will have to include a conditional statement to find the correct item types.
var docRef = app.activeDocument; var layers = docRef.layers; var myLayer = layers["Target Layer"]; docRef.selection = null; for(var a=0;a
-
trying to downlad but 12 items cannot select the language
I try to download 12 items but cannot select language.on page where you choose the version, it asks of prefference language but the language button does not work. I'm trying to move items to a new computer. (windows)
Download Photoshop Elements products | 10, 11, 12, 13
There are a group of languages in the upper left block and the 2 files in the right column to download for Windows in these languages, and a group of languages in the lower left for Mac and a single file to download in the Central column for all these languages.
Guinot
-
Impossible to select the layer.
I make a film of typography. I am now at the part that I do a composition of each 5 layers. But after several times I'm stuck. Because as soon as I select a layer I select the publication I've done. It's just scared because I still get the error when I'm away in. Losing hours of work.
If you never turned on, how ' end Open GL? It should be off, too. After these two easy to do things, you can dig deeper in the previous proposals if necessary.
-
OK, I am puzzled here. I have a file of CS5 that someone sent me, just a simple business card 2 page. I choose some elements in there (enough to do the job for the moment) but not the bottom. It's almost as if the creator meant it locked somehow. It was a CS5 file, I exported to idml and tried, I replaced the prefs and I triple checked the 'prevent the selection of the locked objects' before and after the replacement of pref. The only thing I can think is opening the idml in CS4, but I uninstalled who because of other problems, so it's a few hours work this straw to clutch...
As I said, it is not as if I need to change the background at the moment but it's really confusing. If someone wants a go I'll PM with a download link, send instead here participants, I kind of know thank you, it is not as if it is highly confientiel, but this is a customers property.
Is the master page background? Look in the layer panel, you can extend it so that it displays on the selected spread. Is this something locked it?
(I don't think that someone is using a feature of watermark which is available through the script, but not the menu.)
-
Hello
I have a logo and I want to make a change for her: suddenly he is supposed to be transparent.
However, I can not select the part of the graph. It is on the same layer as a text that I can select. Nothing seems to be blocked.
Can someone help me please?
Bergen-Belsen,
Stroke and the point behind it are locked paths. The background is a blue square with a white line above.
Of course, you need to unlock (click on the lock button)
How can I get the invisible race
You can click the eye button
and the square is divided into two parts? (is there a pathfinder as in InDesign?)
There is a Pathfinder (window > Pathfinder, bundled with the palette/Panel transformation); You can also draw a straight line where you want the division and to object > path > divide objects below.If you want to cut the shape of racing out of the place, instead of the two steps above, you can simply apply the object > path > divide objects below the stroke and turn that subsequently the invisible part, or delete. or you can select at the time and just use Pathfinder > less prominent.
-
Cannot select the last picture
Hello
I have 75 frames in an animation. I have about 6 layers.
I'm putting a stop on the last image statement.
Whenever I open the Actions window it says even if image 1
the playhead is positioned on the last image.
How to place a stop comand on the last image and which layer
should I select?
Thank you
Jim
After having selected the last image, right-click on it and select Insert image. You should now be able to add your stop() command in the last picture.
Maybe you are looking for
-
Background blurred after reboot
Most of the time, after I reboot, my background is the same fuzzy version of my experience that shows the login screen. There is also a dark alpha superimposed on the image channel. When I close a window on a standard desktop computer Finder, the Off
-
Windows 8.1 ReadyNas with sync - when online very slow file access
Hello I use the latest firmware 6.4.2 and network of NAS drives, I use with the Windows synchronizes 'offline' feature to make them. Operating system is Windows 8.1. I'm the only user with the 8.1 and only synchronize the network of NAS drives. Acces
-
Hello Forums or This is my first post on this forum and I've been using labview for about 8 months now I have a problem about writing data in the modbus registers through a server of e/s defined as a slave modbus for my hardware 9074. Once I finished
-
How to use the values acquired by different treatments with 9188 OR cDAQ
Hi guys, I'm trying to use NI DAQ 9188 chasis with temperature measurement module 9214. I plugged in 3 modules to the module and split signals. But I'm not sure that I can easily these values in functions. I'm trying to convert them into table 1 d, b
-
Dell wireless WLAN card wireless network controller stopped working
I have a Dell laptop and the printer PC, but am now unable to function of the printer. I read above that the reason, but how to fix this?