PowerShell has stopped the work and high CPU usage

My laptop recently started to operate erratic, slow, very slow start as well as general use... even the cursor was glitch.

A recurring error is "powershell has stopped working".  and "the security will not allow this download."

I did a defrag and clean the c drive... I'm not very tech savvy, so I took it to Geek Squad, who said that they could not recreate the problems.

They made an optimization, malware, cleaned and changed the browser...

I opened the monitor cpu and the cpu running very high, sometimes 100%, and the laptop gets hot, even though I have a cooler under him.   If I disable the internet CPU breaks down... when I turn on the internet that it goes back immediately.   It all started around November 15 and I have no idea why.

I am running windows 7 and have a HP Pavilion quad core with 6 GB.

When I ran spybot there any spy software, but a huge amount of temporary files.

The Geek Squad said it was a virus, but they had cleaned up a bit of malware.

I have no idea what to do now?

Hello

Open the event viewer > application log

Look for errors related to Power Shell

Run the System File Checker

https://support.Microsoft.com/kb/929833?WA=wsignin1.0

Related topic:

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/getting-Windows-PowerShell-has-stopped-working/88d50fd7-aaf4-4d4a-8ed4-27e9dfab8ee9

You have KB2952664 installed in Windows Updates?  Try to uninstall in order to determine whether it can contribute to the issue.

Tags: Windows

Similar Questions

  • memory leak Winlogon.exe and high CPU usage

    I use Windows XP SP3. I'm leaking memory in winlogon.exe (about 5 M/hour). In addition, the CPU usage spikes to 50% of all 6 seconds. The file is properly signed so probably not a virus.

    This problem started after the application of last weeks patches.

    I seriously doubt that winlogon has a memory leak or people around the world would be screaming about it... and they are not.

    If this is what a thing look like, then you have another problem - probably a malware infection, or what you are currently using antivirus/antimalware protection is afflicted.

    Looking at previous answers, I would say that McAfee is afflicted, and it is already a well know that McAfee is a memory and CPU hog and you may want to consider replacing with something of less intrusive as Microsoft Security Essentials (do you use McAfee?).

    Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    What is your Internet browser and version?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    What do you see (exactly) that you don't think you should see, and when you see it?

    If the system works, what do you think might have changed since the last time it did not work properly?

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

    The scans by operating clean, restart and fix any problems.

  • Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

    Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

    Hi Nutmeg30,

    • Did you the latest changes on the computer?
    • You have security software installed on the computer?

    Learn more about the test of startup failures see link below on the Dell site and check if it helps.

    Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

    It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.
  • High CPU usage by "System outages" and missing keystrokes in IE on all new HP laptop 15-r085nd

    I recently bought a HP15-r085nd (Win 8.1 with Bing), and right out of the box, I encountered this problem:

    After the awakening of the mode (usually after the first time to wake from sleep mode, but always after the second time), the process "System outages" has high utilization of the processor, up to 45%. The laptop then responds very, very slow. In addition, in Internet Explorer (but only in Internet Explorer, it seems!) strikes are missing out.

    I tried the following:

    -Implementation of all the updates of Windows, all McAfee updates and all of the updates from HP Assistent. No results.

    -Reinstall all the drivers, no results. Windows system restore: no result. Factory reset the recovery partition: no result. Then implemented all the updates again: no result.

    -J' tried to use Microsoft Xperf to diagnose the problem: it seems wdf0100.sys to blame for the high CPU usage. (In other words, if I have interpreted the results in the right way).

    -J' then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task Manager and disable all non-Microsoft services in msconfig. The result was that the high CPU usage of "System interrupts" occurred less frequently after the first time out of the way 'sleep', but still she always had after the second time to wake off mode 'sleep'. Uninstallation of McAfee seems to have the same effect, by the way.

    -J' then did some troubleshooting with the store were I bought it. They used a pilot program to install newer versions of the drivers. Also, in vain.

    Then they gave me another laptop of the same model (r085nd). It had exactly the same problems. So I think that all laptops of this model have the same problem! Does anyone know of a similar case with a laptop similar?

    -J' then did some troubleshooting with HP support. We have updated the BIOS (F.24), without result. We have made a few updates to additional drivers on the HP site, no results. We wanted to update the graphic driver Intel HD (sp65598), but we couldn't install it, an error message saying: minimum system requirements were not satisfied.

    I hope that the HP support can arrive at a solution (they wanted to deepen this). If so, I'll promise to post it here, because it affects probably other r085nd HP as well.

    In the mean time, I'd appreciate any suggestions, because I'm totally confused now. Someone at - it ideas? I will answer all the answers!

    I was contacted by HP Support again. After a new series of updates which included some updates everything new on the site of HP is solved the problem with high CPU usage by "system outages"!

    We have done several updates, so I know not that exactly solved the problem, but it is those:

    -New firmware BIOS: version F.33 (my bet would be that is the one that solves the problem)

    -New Intel chipset driver: 1.20 (sp69575.exe)

    -New driver Intel HD Graphics: 1.20 (sp69589.exe): 10.18.10.3958 (this one tried earlier, without solving the problem)

    -New driver Realtek card reader: 1.20Ap3 (sp69610.exe)

    I hope this helps other people with the same problem.

    Thanks to the HP Support team for their help with this problem!

    Moreover, the problem of lack of strikes in Internet Explorer (more use of CPU (any reason), the sequences of keys more are not registered!) still exists! I work around this problem by using Google Chrome. Again, I hope that this issue might get resolved as well! I nevertheless marks it as "Resolved" as the main problem is resolved.

  • I get this message - internet Explorer - data execution prevention has stopped the program

    I get this message - internet exployer - data execution prevention has stopped the program and it freezes

    Hello

    EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
    http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

    The problem might actually be an add-on or another program to the origin of the problem and you should check that
    1st.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
    machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

    Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

    not better?

    Close IE and try again IE or IE with no Addons

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question. (Toolbars are BHO)
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
    unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
    run as a scanner.

    http://www.Malwarebytes.org/

    I would add prevx so.

    Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    -------------------------------------------------------------------

    Do yourself a big favor and work through 1 above.

    How control DEP but I don't recommend turning it off and certainly not to let power off.

    How to enable DEP on or off for a program under Vista
    http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

    How to enable or disable DEP in Vista
    http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

    ====================================

    If nothing else works you can try this however I would use as a last resort.

    IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
    Online - APPLY - OK attacks close and restart IE

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Cisco 4506 high CPU usage

    Hello

    Yesterday afternoon, one of our 4506 switch has climbed to 96% CPU usage. I did not the configuration changes. Here is the process with high CPU usage

    40 36630921841089949084 3360% 8.63% 10.56% 11,29% 0 Cat4k Mgmt HiPri

    41 30929587802851505705 1084 36,61 36,53% 36.18% 0 Cat4k Mgmt LoPri

    76 72485492 270422107 268 entry IP 7.91% 7.72% 7,68% 0

    113 35661224 40030007 890 21.91 28.13 29,84% 0 DHCPD receive

    After having HS health platform, what are those high:

    S2w-JobEventSchedule 10.00 7.54 10 8 100 500 9 9 7 36703:06

    Stub-JobEventSchedul 10.00 12.23 10 48 100 500 12 12 9 51004:51

    K2CpuMan review 30,00 29,44 30 99 100 500 33 32 25 37067:58

    K2AccelPacketMan: Tx 10.00 12,15 20 1 100 500 12 12 10 11871:22

    And finally sh platform cpu packet statistics gives me this

    Packets dropped in hardware by CPU Subport (txQueueNotAvail)

    UC Subport TxQueue 0 TxQueue 1 TxQueue 2 TxQueue 3

    ------------ --------------- --------------- --------------- ---------------

    0 11045 14031 149981 188579662

    1               0               0               0         5919279

    2               0          115638               0               0

    RkiosSysPacketMan:

    Falures allowance package: 0

    Package (common software) buffer allocation falures: 0

    Package Buffer (software ESMP) allocation falures: 0

    Package Buffer (software EOBC) allocation falures: 0

    Falures IOS Packet Wrapper buffer allocation: 0

    Packets dropped in the overall treatment

    Total 5 s 1 min, 5 min 1 hour avg avg avg avg

    -------------------- --------- --------- --------- ----------

    146521131 0 0 0 0

    Packets dropped in treatment by event CPU

    AVG s Total 5 1 min, 5 min avg avg avg 1 hour event

    ----------------- -------------------- --------- --------- --------- ----------

    Input Acl 146002289 0 0 0 0

    SA Miss                             27         0         0         0          0

    Packets dropped in the treatment of priority

    AVG s Total 5 priority 1 min, 5 min avg avg avg 1 hour

    ----------------- -------------------- --------- --------- --------- ----------

    Normal 46723179 0 0 0 0

    Medium 518884 0 0 0 0

    High 99797883 0 0 0 0

    Packets dropped in the treatment of the reason

    AVG s Total 5 reason 1 min, 5 min avg avg avg 1 hour

    ------------------ -------------------- --------- --------- --------- ----------

    SrcAddrTableFilt 24 0 0 0 0

    L2DstDrop                             7         0         0         0          0

    L2DstDropInAcl 46 0 0 0 0

    NoDstPorts                           32         0         0         0          0

    NoFloodPorts 146521022 0 0 0 0

    The package 16 total queues

    Packets received from the packet queue

    Total 5 s 1 min, 5 min 1 hour avg avg avg avg queue

    ---------------------- --------------- --------- --------- --------- ----------

    6279742115 238 247 203 193 ESMP

    L2/L3Control 1320811357 57 48 43 41

    Host of learning 24933459 1 0 0 0

    L3 Fwd Medium 5813 0 0 0 0

    L3 Fwd Low 72923122 0 0 0 0

    L2 Fwd high 11130 0 0 0 0

    L2 Fwd Medium 164016 0 0 0 0

    L2 Fwd 242645408 227 237 193 185 Low

    L3 Rx High                           9         0         0         0          0

    L3 Rx 89296999 439 461 378 364 Low

    Failure of the RPF 129420 0 0 0 0

    Packets dropped packet queue

    Total 5 s 1 min, 5 min 1 hour avg avg avg avg queue

    ---------------------- --------------- --------- --------- --------- ----------

    L2/L3Control 18470371 0 0 0 0

    Host of learning 5825831 0 0 0 0

    L2 Fwd Low 405210 0 0 0 0

    L3 Rx Low                         9863         0         0         0          0

    I will be restarting the night switch to see if it helps.

    Thank you.

    Salman

    Hello Salman,

    If DHCP requests are taken over by clients, you will probably want to focus on the limiting of requests DHCP using DHCP snooping.

    ip dhcp snooping limit rate rate

    http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/65591-Cat4500-high-CPU.html#high_cpu

    http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst4500/12-2/25ew/configuration/guide/conf/DHCP.html#wp1073418

    -Ginette

  • Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

    Original title: Windows Update stopped working Vista Home Basic.

    HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

    Hello

    Question: Windows Update has stopped working

    1. do you get an error message when you try to update?

    2. were there any changes (hardware or software) to the computer before the show?

    Perform the steps from the link below.

    The problems with the installation of updates (Windows Vista)

    Question: display Error Code 43 adapter has stopped the unit

    Run the Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows (Fixit)

    Hope this information helps.

  • "Windows PowerShell has stopped working" error message popping up constantly

    I get the error "Windows PowerShell has stopped working" message popping up constantly (several times per minute).  This started after I restarted my laptop with nothing else running but the standard startup programs.  How do I get this resolved?

    The detail section of the problem shows the following:

    Signature of the problem:
    Problem event name: BEX
    Application name: powershell.exe
    Application version: 6.2.9200.16398
    Application timestamp: 50338287
    Fault Module name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 031cebc0
    Exception code: c0000005
    Exception data: 00000008
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    Hi Kumar,

    Thanks for your reply. It was caused by Poweliks.

    What I did: reset the IE security (version 11) by default; Download the updated version of free version of Malwarebyte s in SafeMode with network connection; restored the system to the point before that he has been infected with the Poweliks (I got lucky that point to restore was not removed by the system yet); then re scan the entire PC in mode safe mode with networking. So far, nearly a week, the PC works fine and the Poweliks wish never to return.

    Thanks for all members of the community to help.

    Happy new year to all!

    -Kevin

  • PowerShell Stopped Working - error Windows 8 Windows Powershell has stopped working

    For the last 6 months, I got the message, "Windows Powershell has stopped working" with the command prompt to close the program. I close it and more that probably happens about five or six times during the use. I've updated, due to AVG security scans, I even FOUND powershell.exe and removed and STILL get the message.

    I don't know what to do. I'm so frustrated. I have a laptop Windows 8 AMD series. I would like to know if you want some more info!

    Hello

    I suggest you uninstall AVG and other third party of your system software. Then restart and run SFC/scannow command to the prompt administration control, reboot again and see if the problem is resolved.

    Hope this helps, good luck :)

  • What is powershell? I get a pop up saying powershell has stopped working

    Hello

    I get a pop up saying powershell has stopped working. Can someone help me? I don't know what it is. Also, there are some emails that I can not open and I don't know if this is related.  Thanks in advance.

    PowerShell: http://technet.microsoft.com/en-us/library/bb978526.aspx

  • After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

    After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

    You can change the appearance of a selection by clicking on "reading list" in the upper right of the iTunes window. The desired view is probably "tracks"

  • My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

    My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

    My lightroom was great before the crash to work and I have a lot of work still pending.

    You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

    The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

  • NVIDIA graphics driver has stopped from working properly.

    well, I have a HP pavilion dv6000 with windows vista. my laptop has a recurring problem: the screen stop working there are lines everywhere and the mouse becomes what looks like a saw. You must restart it or put it to sleep. It keeps recurring more frequently and after about 3 - 5 times, the computer will not restart in any. Ive done system restore, and then when I'm running again, he looked for a solution to the problem. I received this message:

    «NVIDIA graphics driver has stopped to work properly.» an update of the driver, as appropriate, could prevent this problem does not happen. "and then there's a list of about 5 options on how to update. I did the first two (check the windows automatically updated and manually update the driver). Update Windows provided nothing driver associated. When I went to update manually, it says the best driver is already installed. When I had clicked on my driver it says that everything was working properly.

    This has happened several times, ive just saved and deleted most all of my computer.

    Here's my driver information:

    NVIDIA GeForce 7150 M / nForce 630M

    Help, please!

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the update that precedes your video/display readers.

    Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
    Sites of the manufacturer of the device.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • 10.1.7 Adobe will not close in the Task Manager when you exit the program. High CPU

    Hello

    10.1.7 updated and I noticed that when you close the program, an instance of acrobat remains open in the Task Manager with the use of high CPU 50% +. Close any, unless you complete the task. If you open adobe still a new instance opens again consume more cpu and paralyzes the machine with high CPU. It's on computer 64-bit win 8. The work of previous 10.1.6 liberation for a while on the same machine without any problems.

    Thanks in advance

    How to restore for me

    1.

    Uninstall Acrobat X

    2.

    Used my initial installationfile for AcrobatX 10.0.0

    3.

    Downloaded for ftp://ftp.adobe.com/pub/adobe/acrobat/win/10.x/ 10.1.5 update

    List of compatible updates can be found here. http://helpx.Adobe.com/Acrobat/release-note/release-notes-Acrobat-Reader.html

  • System runs slowly, and my CPU usage is very high.

    High CPU usage

    My cpu is in every sense. from 12 to 100 and slow

    Hi linda lyster,.

    ·         What version of the operating system is installed on the computer?

    ·         Did you do changes on the computer before the show?

    ·         What is the number and the model of the computer?

    Check in the Task Manager , which process is toll until the CPU usage.

    Follow the steps.

    Method 1: Run the troubleshooter of performance.

    Open the troubleshooter of Performance

    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    For reference:

    Ways to improve your computer's performance

    http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

    Optimize Windows 7 for better performance

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

Maybe you are looking for