PP 2015.3 Edit to tape function suddenly not working properly after the update

Similar Questions

• My saved custom actions are suddenly not working properly in Photoshop CC 2015

  Some custom actions work, but some are not.

  For example, I have an action that puts a 4 time white px around a point/layer. Suddenly, she asked a px white line 17 instead. I looked at the details of the action, and he says still 4 pixels. If I clear the amount of the order of the day/layer and then re-the apply, it works fine. I have about four or five of these actions of race who have decided to return to on me.

  Stocks were initially created in version 6... certainly before CC, but until that the past couple of days, they worked very well.

  Any thoughts? Bugs out there, that I should know about? Or should I just re - register each one?

  You could just delete the part of the racing action and the record that hand again... PS CC 2015 has some issues, but I have not seen with stocks, yet.

• HAdobe Illustrator CC 2015 does not work properly after upgrading from 2014 CC

  Adobe Illustrator CC 2015 does not work after update from 2014 CC. I have a black screen and I am unable to work. Tools work, but I don't see any results. Could you help me solve this problem? Thank you!

  Try the toggling of the GPU preview

  Display > GPU preview
  Windows: CTRL + E
  MAC: CMD + E

  You can also try switch to wireframe mode.

• Energy function does not work properly (SP6100)

  Hi all

  last week, I have big problems with my laptop. On my laptop, I have three different systems of windows on different partitions 3 installed. On all systems, my laptop says i have to change the battery imediadly. But: I don't have my battery in my notebook. I'm still working with my adapter sector.

  The problem is that my laptop shoes the battery status in the taskbar and the notebook is changing in the mode "styndby" after a minute, when I does not work with it.

  These symthomes are on all my three systems, so I think, there must be a hardware defect.

  I can't lokate the defect. Everyone has an idea how to solve this problem?

  Thanks for your help

  Greetings from Bremen/Germany
  Thomas

  Hi Thomas,

  As Tom says rightly, you should be able to prevent your laptop goes into stand-by by changing the characteristics of the power management system.

  I believe that your laptop can be intermittent pause in his diet that is causing the power system to believe that it is running on battery power when it is actually on the current. Make sure that the power connector is firmly committed to place on your laptop.

  Normally, when this happens, you will need to turn off your laptop and then restart it to restore the normal AC power management.

  I suspect you're going to stand by as the Toshiba Power, utility allows you to define different characteristics for the battery and AC modes. As Tom says rightly, you can change the battery settings to prevent your laptop go in mode sleep.

  HTH

• I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Search function does not work in a document, all the ideas of solution?

  Nice day

  I use Adobe Acrobat Reader DC 2015 Release Version 2015.008.20082 l. Within the program I asked for updates, and he says that it is current.

  The "Search/search" function does not work even when I clearly see the word I'm looking. Any ideas?

  Thank you

  Meredith

  Hi Meredith,

  Please confirm if you are using Acrobat or Reader?

  Search function will not work if it is a pdf document scanned in image format, you must apply OCR on this file by using Acrobat to be able to search for text in the document.

  Kind regards
  Rahul

• Portege R30 - Touchpad left click or tapping in do not work

  Hello

  Left click or tapping in do not work.
  Tried to reinstall the driver or restart in safe mode, but it works only for 2-3 minutes and stops again.

  Hello

  Computer laptop additional AccuPoint support. Right?

  Go to control panel-> mouse-> device-> advanced features parameters settings
  Here, you will be able to change the setting for Accupoint as well as for the touchpad.
  I recommend to check all options that could affect the left-click or press

  But if you can exclude all software related issues (like the touchpad driver failure or wrong settings) and if you are not able to solve the problem by retrieving the unit while the problem might be related to a hardware malfunction of touchpad.

• Qosmio X 870-F special function keys not working not

  Hello

  I just got my laptop (windows 8.1) repaired with replacement being installed equipment. Something I noticed only worse is how the brightness F keys do not respond. The F2 and F3 keys work themselves, but not the special function. It's really weird that others work very well, as the volume.

  I tried to uninstall/install two DLC driver (was utilitarian value Toshiba or something but I can't remember names are the other was literally the wording of the keys/keyboard fn or f in there). It did not work.

  Can anyone help solve this for me? I don't know what windows 10 comes along it all reset and hopefully work again, but this is a very niggling nuisance at the moment.

  Thank you.

  Unisntall the Toshiba Value Added Package because this package isn't compatible with Win system 8.1

  You need to install the:
  Toshiba Driver for Win 8.1 system
  http://Support1.toshiba-tro.de/Tedd-...1016171635.zip

  as well as the
  Toshiba to Win 8.1 function key utility
  http://Support1.toshiba-tro.de/Tedd-...1002134400.zip

  Check also all 8.1 Win 64-bit drivers available for this series.

  

  I recommend you to test the different graphics card drivers where the brightness of the display would not work properly.

• Special function keys not working not not on Satellite C50 - Windows 8.1

  Hello

  Please could someone help me.

  I have a Toshiba Satellite C50-A0393, I received a few months ago with already installed Windows 8.1 (64-bit). Today, I got a message saying that I had to watch the PC health, a blue message Toshiba about that the access agreement and I noticed that there are three updates that needed to be done, the only one, I remember being the Toshiba Video Player. I think that another had to do with the light of the charger?
  I do not know.

  But once I rebooted my laptop after the update I noticed that the special function keys were not working (i.e. the volume, mute, pause and play, etc..). Then, I went to the Toshiba Office help and in Control Panel and select the keyboard tab. I did as the setting for the special function mode has been selected.

  Now, when this setting is in place, some keys work but for F3, F5, F6, etc. and when I want to use special features that the volume up and down work when pressing 'Fn', but the special function mode is still selected? These two work only, not the mute or the flightmode or bluetooth, which was operating normally before the updates.

  I googled but can't find something specific to 8.1, or not covered do not upgrade to 8.1. I can't find the flashcard utility and do not want to try something where I don't know what I'm doing. How can I get these special function keys working again normally? Sorry for the long message, but I wanted to give as much information as possible.

  Thank you very much

  Melanie

  Hello

  It seems strange to me that an update of Toshiba (Toshiba Video Player, etc.) would have an impact on the key features of function.
  However, the function key (F1 - F10) can be used in combination with or without the FN key. It depends on the special function key mode.

  In case you want to use the F1 - F12 functions without the FN key, the key mode of function must be enabled (should be set to the special mode of operation)

  Full details here how it works:
  https://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

  Now it these buttons would not work even if pressing the FN key, then there is a problem with the software.

  First of all I would recommend allows you to set the default BIOS because this mode key function can be changed in the BIOS too.
  After this, check if the key would work. If not, reinstall
  Key feature of Toshiba utility

  And the driver for the Toshiba system

  You can also check if the essential service has not been disabled.
  Start the Task Manager and go to start a number of questions. You must activate all Toshiba apps, services and then restart.

• Satellite P300-190: function keys do not work properly

  Yesterday I HAV epurchased P300-190 laptop but my function keys do not work properly! :-(
  Do you know what may be a problem and how can I solve it?

  See you soon
  Pocoyo

  What is the problem with the keys exactly?

  Try reinstalling the added value package (PVAT). You can get the latest version from the site Web of Toshiba http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• Function keys not working on Ideapad Y580 after the upgrade to windows 8

  Hello
  I have improved my Ideapad Y580 to windows 8, and now I can't get the combination of function keys to activate my wireless hardware.

  Please install windows lenovo energy management 7, then press fn + f5. Windows 8 is not working properly.
  http://download.Lenovo.com/Consumer/mobiles/cagt24ww.exe

• curve adjustment function does not work

  Hi all

  I am trying to bend fitting, a graphic. but the curve adjustment function does not work. I get no output curve.

  which suggests to me u.

  Thank you

  You have been asked to view the code. We cannot solve the photos.

  Matrices X and Y are same length? Is a NaN value? What the output error say you?

  (Also note that in this case, it would be convenient if we don't need to wire x take a look at this idea!)

  This discussion is useless until you attach a real VI and data, so please.

• asynchronuous functions do not work in a c# used by CVI application dll

  Hello

  I have an application written with CVI 9.0.1, who must interact with a dll c# 2010 (which has no window) through a CVI<->wrapper .net (created with the controller of the CVI useful .net).

  This c# dll uses the functions asynchronuous, as NetworkStream.BeginRead () and EndRead() of an object of System.Net.Sockets.TcpClient for example.

  These asynchronuous functions work very well when the c# dll is used by a c# application (with a main window) or the c# dll is converted into a stand-alone c# program (having a window with buttons, call its methods, just to try), but asynchronuous functions do not work when my c# dll is called by my CVI application (which is my goal) : execution remains inside the NetworkStream.BeginRead () for example (for the concerned thread).

  NetworkStream.BeginRead () can be bypassed successfully by using the function alternator NetworkStream.Read () instead, but the c# dll uses any other asynchronuous functions which have no associated alternator function.

  Here's some c# code (I don't have the source code of the Snmp object; got_trap() method is never called when asynchonuous calls do not work):

  public void run() / / wire

  {

  SNMP snmp = null;

  Try

  {

  SNMP = new Snmp (true);

  SNMP. NotifyListenPort = 162;

  SNMP. NotifyRegister (null, null, new NotifyCallback (got_trap), CB_DATA_);

  isActive = true;

  Timeout.Infinite;

  }

  ...

  }

  Thinking it might be a problem with the window messages that could not be processed (in the c# dll), I tried to replace the Timeout.Infinite statement in the code where the management of asynchronuous are held, by a creation of window over my loop of messages in Win32 window, but asynchronuous functions do not work better (while my loop seems to process messages successfully) :

  Form myForm = new Form(); an empty window

  myForm.Show ();

  int bRet;

  MSG msg = new MSG();

  While ((bRet = GetMessage (out msg, IntPtr.Zero, 0, 0))! = 0)

  {

  If (bRet == - 1).

  {

  handle the error and possibly out

  }

  on the other

  {

  Switch (msg.message)

  {

  default: / / everything else

  TranslateMessage (Ref msg);

  DispatchMessage (Ref msg);

  break;

  }

  }

  }

  Any idea?

  Thank you

  rvfr.

  Solved: in fact, the Assembly of snmp I used just need to be registered dotNet.

  rvfr.