PPP light does not blink

The ppp of light does not illuminate & cannot connect 2 sites only 2. Always have access to all other Web sites & email. What can I do to fix this?

Advertisement

Hello

These websites is secure? You did changes to the computer?
What Internet browser do you use?

Method 1.
For modem problem, you can contact the modem manufacturer. As far as websites are concerned, I would ask to add these sites to the zone of confidence and check.

Method 2.
a. If the problem persists, I recommend allows you to optimize the internet explore.
See the article below for steps optimize internet explore. Also check if you can access these webistes in mode without modules if you have Internet Explorer 7 or above.
http://support.Microsoft.com/kb/936213
 
b. If nothing works to solve the issue try reset Internet Explorer.
How reset internet Explorer?
http://support.Microsoft.com/kb/923737
IE reset warning:
Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

I hope this helps.

Tags: Windows

Similar Questions

  • Police Segoe UI Light does not

    Segoe UI Light does not work in Firefox 8 when you use it in CSS.

    You may need to use additional selectors to get this specific light family group Segoe UI font.

    See this for an example on Arial.

  • Satellite C660 - 11 H - HDD light is not blinking and laptop extremely slow

    Hi, I recently started having problems with the laptop above, when you start the screen blocks on the screen 'windows', the HARD drive light does not work, either.
    The computer loads up thereafter, but is very slow.

    Please note that the laptop was recently withdrawn only from a relatively sho height - problems began shortly after.

    I think it might be the hard drive, Pls help.

    Thank you

    > I think it might be the hard drive, Pls help.
    I agree with you. It's probably HDD Hat doesn't work properly.
    Hard drives are cheap and you can exchange it alone then I recommend get you the new HARD drive, Exchange, install the original recovery image and test functionality.

    If you need assistance you are welcome.

  • Satellite M30: Wireless light does not come

    My wireless on my laptop light is not.
    I switch wireless enabled but the light does not come and my router is turned on.

    Also, I can't check the local networks.
    Could someone help me identify this problem?

    Hello

    The wireless network card is properly installed and listed in Device Manager? To check first please all NICs.

  • CD drive does not open and the light does not work

    original title: single CD player problem

    The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

    My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

    When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

    I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

    WTFFF ideas? I really hope that its not the motherboard

    There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

    "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

    Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

    I tried to connect on a couple different SATA ports on the motherboard.

  • X 201 WLAN LED does not blink. Is this normal?

    Hello, I just got a ThinkPad X 201 (this is my third ThinkPad). As expected, this is a great machine and I'm pretty impressed with its performance, despite its size.

    However, I noticed that the WIFI does not blink - my two other ThinkPads done - it. Is this normal? I have not noticed any problems with conectivity.

    Also, I am interested in the WWAN upgrade (this machine is expandable WWAN). The maintenance manual contained the F3507g Ericsson as a proper map. I'm lucky to have this one in my other ThinkPad, but when I tried to install the X 201 rejected saying its not allowed. How can I find out what other cards listed in the manual is really compatible with the model?

    WLAN-LED:

    1. Run regedit
    2. GoTo HKLM\SYSTEM\CurrentControlSet\Control\Class
    3. Search from there for your wireless network card f.ex "6200 agn' (see in Device Manager)
      As search result you will get for example:
      "\0007 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CEBFC1-08002BE10318}.
      You will find additional keys like "DriverDesc", "DriverVersion", "Ada" etc.
    4. Create a RegDWord named 'LedMode '.
    5. set its value to one of the following:
    • 0 = always off LED
    • 1 = led on and blinks then that traffic
    • 2 = always on LED

    deactivate and activate your WLAN device in Device Manager.

    On some Thinkpads "LedMode" - entry is missing - so it must be created manually

  • Touch Pad v7.5 light does not, if I turn off the red light button lights up.

    Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

    The TouchPad seems to work fine

    Thanks for the ansswer...  He solved the problem.

  • "Accu full, 100%" but the green light does not illuminate.

    Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

    No idea why - and how to fix it?

    Thank you.

    Hello

    What brand / model of the laptop?

    If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
     
    See the link, then run the Fixit.
    The problems of power consumption and extend laptop battery life
    http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
    Method 2:
  • BIOS does not blink.

    Hello world

    I had a few difficulties to latley with a number of things that I'm sure are related to my BIOS so I wanted put up-to-date.  Yet, for my ever growing unhappiness, the BIOS simply does not blink.  I tried everything on the site of HP but also using the support Wizard several times.  The msinfo32 window always says that I still have the old version.  I went to the actuall of BIOS Setup to verify if it was maybe just a problem with msinfo32 update but the BIOS was also the old version.  The version I have now is the F.01_M1.  My computer is a Pavilion dv6 select edition.  Product WF356AV number.

    On another slightly related note: does anyone know how get the stop trying to PXE boot whenever I start my computer?  Not a big deal I just want to cut some time off the coast of startup.

    Thank you very much

    MB

    Hey everybody,

    I found a solution to this problem and wanted to share it.

    It turns out that it was a problem of hard drive after all. Simply, I renamed my HP_TOOLS partition (which contains the files for the system diagnostics and BIOS updates) HP_TOOLSBAK and runs the utility to update again.

    After that, I used the UEFI BIOS HP, which is available on the Web site of their support and drivers, to remake this partition after the removal of one (with diskmgmt.msc). If you do this remember that you must also run the UEFI system diagnostics to get these files back.

    Don't forget that when you redo the partitions that they appear not in Explorer until you return in diskmgmt.msc and right-click the partition and assign it a letter.

    Thanks to all who have responded to this topic and I'm sorry for the long wait for a reply post.

    Sincerely,
    MB

    P.S. I have absolutely no help from HP on this issue.  Repeated debates with representatives were not at all useful.  If HP ever wants me to buy another one of their products they had better to begin supporting some tech for people who have a moderate knowledge of computers and are genuinley problems.  Not only a script for people who can't find the button.

  • HP 15-d030nr Bios does not blink

    Has been updated drivers from the HP website.  The update of the bios is one of the updates, that I chose to do.  After reboot, it says that no boot device has been found.  After checking a few things, I checked the bios, and it seemed like she had not completed upating.  The legacy menu choice was missing, and it seemed that the other menus were not completed.

    The technical for flashing the bios with a USB key, but I was not able to run.  Is the key USB should be formatted with FAT32, NTFS, etc.?  Should it be made bootable?  I am pressing Windows + B when I start the laptop, is that correct or is at - it another way?  Also, after trying the Windows + B, the light caps lock flashes 2 times in the new order.  What does that mean?

    Hi there @JRGJAX,

    The following is helpful to understand what are the codes of error/blink. Of what you say about your problem, I am sure that it will come not surprising that two flashes indicates corrupted BIOS.

    Computer does not start and the lights blink or the computer will beep

    See the following topics in a way that we can restore your BIOS, one understands it Windows + B, but read the instructions carefully, it is possible that it could be a timing issue. I hope it helps.

    Restore the BIOS

    If you need to recover the BIOS with an external device, then you will need.

    Support UEFI HP environment

    It is not as useful for you now, as it assumes that your computer can boot up normally, but I included it for the sake of completeness and for later use.

    Updated the BIOS

    I hope this helps.

  • Camileo h10 flash or movie light does not work

    Hey,.
    Does anyone have any ideas as to why flash does not work on my h1o camileo camcorder. ? or the pilot light.

    Thank you

    Neil

    Please help somebdoy!...

  • HP 15-an000ni star warsedition: mute buttin light does not light

    Hello

    the mute button does not seem to be lighting up when I press the button pls could you give me some solutions s has I could try to fix this

    Hello

    Try the following.

    Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73189.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • Droid 2 Global Notification LED light does not.

    I bought my phone about 3 months ago and a few days ago the notification light has stopped working. It does not work for text messages or low battery, basically he "burned." I tried a factory data reset and still no go. I was thinking about warranty replace the phone but I do not do this for some reason. Any ideas or is it fried? I know that I have all the apps that would make it only works do not, so I'm stuck between the hammer and the anvil.

    I discovered what happened, apparently someone else who had the same problem found out that it's a wire loose which caused the problem, and you can warranty replace it. I hope just as if I do I don't have the same problem a month later.

  • HP Pavilion 15p189na: Mute light does not

    The led of the button mute on my HP Pavilion 15p189na does not work. I use Windows 10 64-bit operating system.

    BIOS Version/Date Insyde F.11, 08/07/2014

    Processor Intel Core i5-4288U CPU 2.60 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors

    This light was absoloutely work very well, but one day it suddenly stopped working. Good news is that mute the button still works fine but the dead ID light.

    Your help will be much appreciated

    Hello

    Try to download and reinstall the software Realtek HD Audio package on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

    During the re-Setup has completed, restart the laptop.

    Kind regards

    DP - K

  • HP 15 Notebook: Mute light does not turn off!

    Hey so been having this problem with my light on the button mute. It does not turn off. I checked to see if the volume works and it makes. Mute works but the light just stays on. Help!

    Hello

    Try the following.

    Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72968.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72183.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

Maybe you are looking for


HashFlare