PR Pro CC 2014 not start (for the first time)

Similar Questions

• For psc 1315: before you can use this feature, OneNote 2010 must start for the first time.

  I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:

  "Before you can use this feature, OneNote 2010 must start for the first time."

  Restart the PC does not solve the problem either. How can I get the printer to work?

  Hello pietpompies7

  See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.

  Microsoft OneNote is misuse of your print jobs?

• HP Pavilion Notebook 15-ab083T: laptop upgraded before even starting for the first time = problem?

  Hello!

  I recently bought this laptop with the intention to replace the hard drive (1 TB HDD 120 GB SSD), as well as upgrading the ram from 8 GB to 16 GB. The problem is that I have improved these things before you start for the first time. And now it complains that it cannot find a device boot, even when I insert a USB key with windows 10 iso on it. Or a cd with windows XP. He needs to have the HDD windows 8.1 original in it on first commissioning? It took a while to replace parts...

  Thanks in advance.

  That's very true, I used gparted before checking this again, and it was corrupted. Very well! I ended up installing windows 10 home using a free student license. It's perfect, since I have windows 8.1 before running on the 1 TB hard drive and it was filled with bloatware, thanks to HP (no offense). So, it is nice to have a clean install. Everything works fine now, I had to change some settings of 'Legacy Boot' in the bios to boot from the USB.

• CD or DVD not detected for the first time, always detected on insert it again.

  Whenever I insert a CD or a DVD into my DVD drive, the drive is not detected. No contents of the drive is displayed in Windows Explorer. I see the drive to read the disc, as indicated by the green light flashing, but nothing happens. This problem is always solved by reinserting the disc. I don't know why I have to insert each disk twice each time so to be read and any help would be greatly appreciated. When I insert the DVD for the first time, its content is not considered in the Windows Explorer, however, he begins to play when I open my DVD playback software and click on the play button. I have Windows XP Professional SP3.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:
  http://support.Microsoft.com/kb/321641/

  See also:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• CS6 flash does not start after the first time.

  Hello! I installed Flash CS6 creative cloud in a previous version to open some old files. It works fine the first time you open it. After you close the it and try to open again, it shows the popup flash for a second and she disappears. Same thing over and over. After you uninstall and install again it opens for the first time and same problem after that.

  Any thoughts?

  It worked:

  Navigate to:

  C:\Users\«yourusername»\AppData\Local\Adobe\Flash CS6\en_US\Configuration

  There is a file fontinfo.txt. This opens up in Notepad and remove all what it and save it, but before you start again Flash, change the properties of this file fontinfo.txt for read only so Flash cannot crush him again.

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C660 is unable to start for the first time

  I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K

  For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).

  Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.

  The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.

  If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.

  He has not indicated in the error logs files

  I did a full reinstall of HARD drive recovery system.
  I did a full system reinstall from recovery DVDs.
  I did a full system reinstall from DVD disk a hard new recovery.
  I replaced the ram

  I tried to update the bios, but get an error
  BIOS version more than 200
  Battery capacity over 10%
  AC is attached

  Hello

  The description of your problem is, for me, quite confusing, and I do not understand your problem.
  Can your notebook load and start the preinstalled operating system or not?

  Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.

• battery does not charge for the first time use

  Hi all

  Recently I bought HP pavilion 15 laptop. I kept it on the pricing of these last two days but the battery won't charge. When I check on power icon it says plugged in, load. Please help me in how I get it my fully charged battery.

  Thanks in advance for your help

  Hi ashluvuall,

  From what you described, it may be a bad battery or power cord.

  Please look back to where you bought the product and replaced it because it is under warranty.

  Don't waste time trying to fix it because it may be a hardware problem.

  I hope this helps!

• Script not running corrextly for the first time

  Hello

  I have a strange problem.

  Always wenn first time (after the opening of tiara), I run my script, it doesn't work for the masses. Creating a report specifically does not.

  When I run the script for the second time (and each additional hour) everything works fine and correctly?

  To understand:

  -I'm doing some (mathemtical) analyze - still works correctly

  -Load / Append ReportLayout prepared, add curves, create text objects - does not work for the first time, then it alwas works correctly

  The error is, that all the curves (that should be in several Annex layouts and text objects) are added to the first sheet of report responsible (although the reportsheets have been added)

  As I said, when I run the script second time (and each additional hour) everything works as it should?

  Thank you

  Hello

  I think I solved the problem by myself.

  I inserted "Call PicUpdate" between the two as an interim step, and now it works fine (even running the script first time)

  Thank you all

• Do not start after having been arrested in the menu "alt + f4" in win7 64 bit for the first time

  I always stop the laptop from the start menu. But now when I stopped it for the first time by the "alt + f4" - menu, it does not restart. Or rather, it starts, but looks like the HARD disc spins down after a second or two, and he did not get past the first screen of boot of Lenovo. I can hit the ESC key to see the detailed (with RAM-tests and other) boot screen, but then nothing happens. I can't go in the BIOS or boot menu. And it does not start on a dvd of Win7. Any ideas?

  Sorry, apparently, that was my (Corsair F-Series 90 GB) SSD that suddenly broke down. I'm back to Corsair.

  Problem solved I guess.

• for the first time using the do not know how to insert video to start editing

  for the first time using the do not know how to insert video to start editing

  First thing you need to know is that After Effects is not a video editor. First is to put some shots together to tell stories (that is changing), After Effects for creating those shots (compositing and Visual effects) and to create animated graphics.

  To use AE, start here: starting After Effects

• iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot

  Hi all

  I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time.  It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.

  Here are the steps I've tried

  1 restart by holding the power button and turning it back on

  2. reboot into recovery by now cmd + R Mode

  3. enter in disk utility

  4 did not have a first-aider for my drive of fusion

  5 tried by clicking file > open or remove encryption (both selections are greyed out)

  6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)

  7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.

  I need help.

  Thanks in advance

  Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.

• I use a USB device for the first time. My computer windows Xp does not recognize. How can I fix this prob, and where can I get the info to fix it?

  When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  Step 1.  Identify the make and model of the USB device.
  Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)

  Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.

• 3000 N200 starts the first time, but he will start for the third time!

  Hello

  My old N200 of 2 years has recently decided not to initialize the first time. Usually it starts the third time lucky this changes in the cold outdoors when it may take 7 or 8 will but or does not start later.  I think it started after that I left the machine running on battery power a day forgotten and the next day it took a few goes to start after plugging it load up.

  When it wont start the fan lights just like the Windows screen comes on and after a few seconds, it dies as if I had pressed and held down the power button as you would to turn off if the system was no answer, and he makes the same noise. When it finally starts the fan is silent!

  This one worked!

  Thank you very much

  I don't know that I have never done this? Certainly not intentionally. Well, I seem to have solved the problem by resetting the CMOS as described elsewhere in the forum. Machine boots first time every time now, so he must have had something to do with it. Or I also during the same operation was released and returned to the my 2 GB memory add on and I think that may be related to poor startup performance if it is not inserted correctly.

  What a relief and after being where I bought they had no idea and wanted to send it away etc etc and I pay £11 a month for such a service, I had a lot more less than an hour on this forum

  Thanks for the reply

• After you have configured the AAU for the first time in the GUI, not able to access the console of the AAU

  Hi all

  I'm setting up cluster for WCC (University Complutense of MADRID and IPM) environment. I moved the cs folder in a shared location (cluster env), connected to the AAU console for the first time and on the page of any given configuration him shared location of path.

  The University Complutense of MADRID on node 1 server has started successfully, but not able to log in (get a 403 forbidden error)

  Save file entry: -.

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".

  javax.servlet.ServletException: could not start a deployment of servers of IDC.

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException: Oracle WebCenter content could not initialize inside the servlet environment.

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ServiceException:! csResourceUtilsFileIOError! csResourceUtilsFileReadError, activestate.hda

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:348)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:191)

  at intradoc.resource.ResourceUtils.serializeDataBinder(ResourceUtils.java:64)

  at intradoc.server.ActiveState.serializeData(ActiveState.java:221)

  at intradoc.server.ActiveState.load(ActiveState.java:58)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:373)

  at intradoc.serialize.DataBinderSerializer.receiveEx(DataBinderSerializer.java:550)

  at intradoc.data.DataSerializeUtils.receiveEx(DataSerializeUtils.java:87)

  at intradoc.data.DataBinder.receiveEx(DataBinder.java:2080)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:327)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  at intradoc.common.IdcDateFormat.optimizeFormat(IdcDateFormat.java:692)

  at intradoc.common.IdcDateFormat.initEx(IdcDateFormat.java:291)

  at intradoc.common.IdcDateFormat.initWithDefaultTimezone(IdcDateFormat.java:187)

  at intradoc.common.IdcDateFormat.init(IdcDateFormat.java:151)

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:364)

  Truncated. check the log file stacktrac full

  Help, please.

  Kind regards

  Vipul

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  Have what version of the WCC you installed?

  Do you have any specific time format located in ucm config.cfg? If so, then comment out him, and then start the server.

  You have the time zone set to GMT0? This can be checked from the activestate.hda file.

  Try the following solution to replace the zone on all had file on /ucm/cs

  Perl-e ' s/tGMT0/report/g;' -pi.save $(trouver /ucm/cs-type f)