Precision 5510

Similar Questions

• Dell Precision 5510 - M2 SATA SSD

  Hello

  I recently bought a Dell Precision 5510 and I now intend to install a 500 GB SSD (M2), or a Samsung 500 GB 850 EVO m2 and a critical CT500MX200SSD4.

  Does anyone know if one of these two SSD is compatible or have any problems with this laptop?

  Thank you

  J.

  Thanks for posting your request here.

  These two device should work without any problems after the upgrade.

• Precision 5510: Not compatible with software USB

  I try to install (just downloaded) G4050 and he stops and tells me that my USB key is not compatible.  I can scan pictures without the software but I need to scan negatives. So I know the * bleep * thing works any suggestions?  Apart from a new scanner?

  I tried to install it in Mode safe and that no longer works.  So I have this ends as a friend called and said he had the same problem with a new Scanjet 4050 and HP tried for several hours with negative results. They had itself back to the scanner and to order a new model later...  Thank you all for all you tips.

  Ron

• 5510 Precision add hard drive

  I am trying to add a hard drive SSD SATA 2.5 "to my new laptop of precision 5510.

  I need to order the inserter/adapter required hard drive and bumper rails to do this.

  I did chat and phone calls to the Dell sales without success to get the correct part numbers.

  In my opinion, that these photos represent the parts I need. They are drawn from this thread to another owner - 5510

  http://Forum.NotebookReview.com/threads/Dell-precision-5510-owners-review.784464/

  First picture shows the bumper shock side to hold the reader safely in the hard drive bracket - I have the disc and Calliper - and the leap card/card.

  Second picture is the leap card/card.

  Can anyone provide me with the required for any of the two references. The adpeter is the most critical.

  Thank you

  

  

  @Community,

  I can confirm that XDYGX is the cable for the disks of 2.5 inches for the XPS 9550 systems and precision 5510.

  

  3XYT5 is the side rubber insulator (there are 2 of them):

  

  3FDY3 is the HDD bracket (some units may already have this installed):

  

• 5510 problems Windows 7

  Hello

  I worked with a few images that I built. After some trial and error, I've built a few images stable and uncooperative. I went to apply precision 5510 and I can't seem to start.

  Is there something unique with the 5510? I've always had problems with the lower end precision mobile, but I thought it would be different for a reason any. The new process was solid, even on difficult children in the past (versions xps13).

  Impatience,

  Precision 5510 has a player of optional NVMe (express nonvolatile memory). Windows 7 does not support this default technology. When you capture your image, you must install a Microsoft hotfix (KB 2990941) which can be found here: http://support.microsoft.com/en-us/kb/2990941

  You want to also make sure that your image of windows 7 is built using GPT and MBR not. This will activate UEFI BIOS for windows 7, but you will need to keep the Legacy option ROMS enabled. Secure boot and windows 7 do not mix!

  If your image is already in the GPT format, you can use DISM to load the hotfix contained in without having to resume. If you don't know how to do a quick search on google for 'load updates to an offline image using dism', you should get what you need.

  Note: If you are new to using UEFI, you want to create your image assist keys using UEFI as well. This means two things: 1) format them using FAT32 and 2) probably need to split your Wim files so that you can put them on your USB. My picture is a little less than 9 GB, and it's in 3 sections.

  I hope it's useful!

• ISO for Ubuntu 14.04 (and 16.04) for Linux-based Dell laptops

  Hello

  I just got my 5510 precision with pre-installed Ubuntu 14.04.

  I noticed that the installed Ubuntu on the laptop is not a vanilla Ubuntu distro. For example, there are a few other DELL specific apt rest added to it. Or it has preinstalled recovery disk creator app, etc..

  I created a USB recovery already, but what DELL hosts this OEM ISO slightly modified for the Ubuntu somewhere on their servers for download - in case someone loses the recovery media and requires the download somewhere?

  I also noticed that DELL specific rest for 16.04 are already on the rest of Ubuntu (dell.archive.ubuntu.com/.../xenial). This means that 16.04 is good to go now for my laptop?

  And if I want to clean install 16.04, DELL provides an ISO to measure with their rest file apt already pre-configured and extra apps pre-installed?

  Two other questions:

  • Additional measures that I have to do if I want to install Kubuntu 16.04 on my 5510 precision? (eg. What rest apt I might add?)
    • Better yet, DELL provides personalized Kubuntu ISO files?
  • How well do Fedora works on these machines?

  Thanks in advance.

  I have this laptop (precision 5510, 32 GB of RAM, i7-6820HQ) for a week and everything I've done so far are optimizations (Windows/Ubuntu) and always the computer behaves so slow (compared to all laptop I had before). It gives me a bad feeling. For that price I expect that all work seamlessly.

  The start-up time takes 8-10 seconds (and I'm not the only one with this problem. (Check here).
  Until I have for Windows/Linux, I need to wait for another 20 seconds.
  Each application starts with a slight delay (~ 1 second).
  Resizing of an application is a slow process.

  My BIOS/drivers are up-to-date.
  In Ubuntu (16.04, 64-bit):
  -J' updated the kernel to 4.7.5 - 040705 (before that, I tried 4.5 and 4.6)
  -the Nvidia driver is now on version 370.28 (before I tried also 361.45, 364.19 and 367.44 370.28)
  In Windows (Pro 10, 64-bit), the same: the latest drivers are installed.

  I thought that maybe there is a problem with the SSD, and you can read here my question. No response.

  I really don't know what else to do.

• Adobe first Windows 10 very slow

  When you run the project even on both a 2015 MacBook Pro and a Dell workstation Precision 5510 Mobile 2016 configured with the latest mobile Xeon chip, graphics and double the RAM as the MacBook, the older MacBook is capable of performing the same task 20 x faster. While the Mobile Workstation can not even the images of playback smoothly. Adobe does not seem compatible with Windows 10 in its current state.

  Are there plans to fix this?

  Adobe does not seem compatible with Windows 10 in its current state.

  Windows 10, I come here

• Adobe stuck on the onboard graphics instead of my Nvidia GPU

  Whenever I change the profile for Adobe Photoshop, Adobe Bridge, Adobe Premiere to 'high performance' it switches back to "integrated graphics" when I close the control panel and it opens again. So from Photoshop, I can only see the P530 graphics. All Adobe programs mentioned running with poor performance because of this.

  I'm on a Dell Precision 5510, Windows 10 64 bit, Xeon, 32GB ram, Nvidia® Quadro® M1000M

  Installed the NVIDIA 361.91 (8.1.820.0) Control Panel

  NVIDIA Quadro M1000M: 10.18.13.6191

  Intel HD Graphics P530: 20.19.15.4331

  I'm stuck on the 'integrated graphics card.

  https://i.imgur.com/avthUSq.PNG

  I let fall the other day, after trying different options, reboots, drivers... Ended up keeping the driver the more recent, as mentioned above. Today, I wanted to see if I could fix it, and to my surprise, parameters were now stored in the Nvidia Control Panel. high-performance GPU and power setting of high performance.

• Problems to breakers 5510 Precision

  I had VERY bad luck with Dell laptops.  Last fall, I ordered the new Dell XPS 15 and he arrived with the bad motherboard and hard drive, which have been replaced and it still does not.  So we go back the order and instead purchased the 5510 precision newly released.  The problems are not immediately obvious, but it soon became obvious that the computer would crash five or six times during an 8-hour work day.  Accidents can be linked to Outlook or Explorer, but he would frequently crash when the computer is completely idle.  We didn't return the computer because we thought that the problem could be driver related, but after update all drivers, we moved on potential conflicts with other software and hardware.  We finally decided to have it replaced, but the replacement had EXACTLY the same problem.  This is a great computer and I have not been able to find all the reports of similar problems, but when we had the same problems with the same machine, I didn't know what to think.  I shall soon return this machine, but I wanted there to be an account of my problems where other people have similar problems.

  It's very interesting.

  My accuracy provided 5510 with Ubuntu.  He has been suspended.  I would be hits a document in say, LibreOffice and the screen would go black suddenly, and that's all.

  I installed Fedora Linux 23, and it seemed to do much better, but it turns out that the problem was still there.

  I thought that the problem was specifically for Linux from Skylake support it is fairly new. I installed Windows 10 pro and all the various dell updated driver.  The machine has suspended several times in Windows yesterday.  At one point, he hung, I rebooted, open Firefox, returned to a web page, just change and he hooked again... but after stop and back again, it didn't hang again.  As my machine did not come with Windows 10, of course I can't support Dell for this... and I'm certainly not ready to return to the Ubuntu installed by Dell either.

  The fact that the problem is Linux/Windows, it seems more related material, or BIOS or something like that... but who knows...  I'll continue to experiment a little more before you have the Dell out.   How long have you since you had your machine back that the problem will not occur again?

• How to make bootable 5510/XPS13/XPS15 precision of the network?

  Hello.

  I have several precision XPS15/5510/XPS13 laprops.

  For now, when Re-imaging has them, I use a flashdrive USB Winpe that loads Acronis, which connects via USB Type C for the NIC on the storage server and load the image of the OS from there.

  Other laptops (like the Dell Latitude or HP ProBook, which have built in Ethernet), don't boot from the PXE server directly, legacy and UEFI mode, so no problem there.

  The problem is I want to make the Dell Ethernet without laptop computers to boot from the network via a USB port for dongle LAN. How can I do?

  Is it possible to open the EFI shell, so I can access the network from there? Because I have not found the Ethernet card in startup options, and the 'activate' EFI network stack does nothing.

  If it helps, I use STLab USB 3.0 - C to Gigabit Ethernet card.

  Thank you much for the answer.

  Vadim.

  You need to "Activate Thunderbolt supported start-up". You will find this setting under System Configuration > Configuration USB/Thunderbolt. If you want to perform a PXE UEFI boot, then you will also need to "activate UEFI stack of network". This setting is located under general > Advanced Startup Options (disable the "Enable Legacy Option ROM" while there, if you want native UEFI). After that, then you should see "USB NIC (IPV4)" and "USB NIC (IPV6)" UEFI boot when you press F12 and the Ethernet USB - C adapter is plugged in and connected to the network.

  @miketerrill

• Reference Dell m2 / NVME specifications and requirements to upgrade for Optiplex, Latitude, XPS and Precision Mobile

  Good daycommunityof Dell.

  Because of your issues, I am pleased to present the information, specifications and requirements for m2 on various models of Dell below.

  Precision 7710:

  Internal dives supported: 3

  Lead taken configurations supported (max): 3 x m2 or m2 2 x and 1 x 2.5 in SATA.

  7710 PCIE lanes:

  2 m2 slots available are wired in 4 X

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches of 7710 7510:

  1 x 745TM 2.5 inches metal support - most of the units will have this already included

  1 x Y1WJX Support of m2 (goes inside the 745TM)

  4 x 2864 D Screw M3x3. Most systems will have these already included. These screws hold support unit of Y1WJX m2, or a record of 2.5 inches in 745TM.

  1 x WPTND Infill of the m2. This installs in the support of Y1WJX m2.

  5 x 4270E M2.0 * screw 3 L

  1 x HR8P8 Cover thermal m2

  Find instructions here on the Dell Community.

  Precision 7510:
                                                                                                                  
  Internal dives supported: 2
                                                                        
  Drive the supported configurations: 1xM.2, 1x2.5 SATA, 2xM.2, 1xM.2 and 1x2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches are the same as the 7710 above.

  5510 precision and XPS 9550:

  Internal dives supported: 2

  Drive the supported configurations: 1 x m2, 1 x 2.5 SATA, 1xM.2 and 1 X 2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired like SATA

  Parts needed to install a m2:

  1 x 88DJK thermal pad (no plate required)

  1 x 4270E  Screw M2X3

  Parts needed in order to add a 2.5-inch disk:

  1 x XDYGX cable

  insulator side 2 x 3XYT5 rubber

  HARD drive 1 x 3FDY3 metal support (some units may already have this even if a disk 2.5 inch was not originally ordered from Dell)

  Discussed here on the Dell Community.

  Precision 3510:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  M.2 housing supports 4 x

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2:
  

  1 x X3YR8  Support for end of m2

  1 x 1X2MT thermal cover

  2 x 4270E  Screw M2X3

  Discussed here on SpiceWorks.

  Latitude E5270, E5470, E5570:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  E5270 supports 2 x
  

  E5570 with CPU: supports 4 X

  E5570 with processor U supports 2 X
  

  E5470 with CPU: supports 2 x
  

  E5470 with processor U supports 2 X
  

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2 is the same as above 3510.
  

  Latitude E7270, E7470:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  M.2 housing supports 2 X

  Parts needed to upgrade to IS:

  1 x DJ69P thermal cover

  2 4270E x screw M2X3 (most systems will have at least one of them already included)

  Discussed here on SpiceWorks.

  13 9350 XPS:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  The available m2 slot supports up to 4 X

  Parts needed:

  1 x 4270E screw M2X3

  OptiPlex 5040, 7040 (Mini Tower):

  Internal dives supported: 2

  Drive configurations supported: 1xM.2, 2xM.2, 1xM.2 and 1x2.5, 2x2.5, 1x3.5

  PCIE lanes:

  The single on board the M.2 slot supports up to 4 X

  The m2 drive installed in 2.5-inch Bay: 2 x

  Necessary parts for the m2:

  Bay of m2 on motherboard:

  1 x thermal Pad J0N94 (installs on the motherboard in the drive of m2)
  1 x YYJF8 live M2X3.5
   
  2.5 inch Bay with m2:

  1 x Cable SATA 6J3FV
  1 x X9FV3 M.2/2.5 inch adapter Bay/caddy
  On the card mother m2 installation instructions found here.

  OS install notes:

  There is a storage updated driver to include PCIE support. (One that you have to install Windows see the drive during installation):

  Intel's most recent

  Dell package

  Driver Samsung

  See also: installing Windows 7 on a SKYLAKE system using MDT: http://www.dell.com/support/article/us/en/19/HOW11493/en

  Obtaining an ISO image:

  For some systems, you can get Dell operating system through Dell hosted image images

  Note: not all systems and service tags will have a picture available.

  Note: Although Dell hosted Images have USB3, they cannot understand the pilot of TSRI currently. (some may know this the pilot to F6). You will need to install the driver of TSRI manually during the installation process of Windows.

  Dell is currently working to add the driver to the TSRI Dell hosted images. No ETA on when this will happen right now.

  Discussed here on SpiceWorks.

  Other works in m2:

  Solid State Drives m2 in chipset Intel Skylake systems Imaging

  Only 1 Solid State Drive (SSD) seen on map stand

  SSD not detected at the start or restart on new precision 15 5000 (5510) or XPS 15 9550

  A PXE with M.2 Solid State Drives boot

  How to distinguish the differences between the m2 cards

  Greetings Ypyap,

  Thank you for your question.

  Yes, the Vostro 14 5468 does support M.2, according to my literature.

  You will need:

  1 x 3P44J m2 stand

  

  x 2 7CJG4 M2 * 2 live (I'm still confirming if cela good reference number)

  

• Precise control of mixer

  Hello

  I wonder, is it possible to precisely drag/move/move and knobs in Logic Pro X mixer? I mean that normally if you click and hold the slider and make it slide simultaneously works normally. But as I remember in other DAWs method with using the key 'control', or 'command' or something like that and that didn't exist by dragging the sliders is very slow with accuracy.

  But I can't find this option in Logic Pro. Could you help me? Thanks in advance for any help.

  I'm sorry for the stupid question, I would never ask for such a thing in the forum, but I really just spend an hour to find the answer in google. Without doubt, I used the wrong keywords, but I tried a lot of things and found nothing that helps me. So maybe you could help me?

  "Hold the SHIFT key while dragging the Volume knob to change the volume level of the finer increments"

  http://help.Apple.com/LogicPro/Mac/10.2.3/#/lgcp8ec34eec

• Site not showing with precision cursor

  On my website bxcell.com cursor home page of the Web site visualizes with precision. It is supposed to be a slider full page. It works in all browsers except Mozilla. More recently, he appeared with the updated version to 42.00. I tried to disable all extensions/plugins, and of course to clear all cache. The error is still there.

  Hmm, the style sheet http://bxcell. com/wp-content/themes/Divi/includes/builder/styles/frontend-builder-style.css?ver=2.5.3 contains this rule:

  .et_pb_slider { position: relative; overflow: hidden; }
  

  If you disable the overflow: hidden on this div, the slider rule extends to the entire width. But... which shouldn't be necessary. I can't understand why this div does not extend to any of the default width. Perhaps a question to the author of the theme?

• Why full screen become Office precision?

  Well, as everyone probably - know everytime I go full screen its future's own space and ranked last in space than precision.

  Both cases make it so boring, and after searching around the internet preference and manufacturing system it stops

  I ask the guy if there is no solution to the problem? I want to stay in the same order as before the full screen fullscreen.

  Thank you

  This is the default behavior according to the standard convention.

  Mission control, you can drag any full screen in any order that you want to reorder.

  You will have solutions that suit you better in  > Sys Pref > Mission Control

  

• Mac anti-virus precisa?

  OLA Pessoal

  O Mac some anti-virus precisa?

  O Mac não precisa others anti-virus software. SE você instala-lo, o seu Mac shivers go deteriorar - themselves.