Precision T3500 recognizes the new HARD drive

Similar Questions

• DV9810us not to recognize the new HARD drive?

  Hello

  I tried recently update my HARD since the 160 GB drive it is initially supplied with due to disk failure. I installed the new HARD drive (a 160 GB, 1.5 GB/S 5400 RPM WD Scorpio Blue) and when I go to start the computer, it will display the HP logo and options before going off after less than 5 seconds. It restarts then 3 more times, before loading any bootable media that I inserted. Right now, I have an external HARD drive that I am running Ubuntu off the coast of so I can at least use the computer at the moment.

  At the BIOS screen, I'm going under Drive Diagnostics and it says IDE Device not found. I find this strange being the wrong drive I took out the laptop SATA. I inserted my Vista Ultimatex64 7 disc and when he asks an installation location, it says not found hard drives.

  The new drive is not dead either, I have hooked up to my desktop via a port SATA extra and is easily recognizable.

  You use the same drive connector in a cage and at the end of the old drive?  I saw where a new drive connector seems to be the same, but they do not work.

• Satellite L305D-S5881 does not recognize the new HARD drive

  Ok. I've had this laptop for a while now.
  It crashed recently. So, I tried to start it up.
  I got "Winload.exe missing or damaged".

  Fortunately, I found an answer to this!
  I got the Vista installation disc and inserted.
  I had this "PAGE_ERROR_IN_NONPAGED_AREA". I fixed too. Stick of 1 GB of RAM to my computer was bad.

  So I replaced it. And during the installation, it hangs. And beeps and undesirable.
  So I thought it was my hard drive. I have a new. (http://www.toshibadirect.com/td/b2c/adet.to?poid=431567 please TAKE a LOOK BEFORE RESPONDING).

  I (try) to install and it does nothing.
  I turn it on and it goes to this page with as my enthernet info. Then I go into the BIOS and it appears. I think I could install it wrong.

  Any help?

  Hello

  I think that the new HARD drive is not recognized, because you have not installed the SATA drivers!
  The new mobile phones support the new SATA controller and especially the drivers are not included in the Windows operating system.

  So, you must first include the SATA drivers before install you the operating system.
  AFAIK the L305D supports an AMD and ATI chipset and SATA drivers must be placed in the ATI graphics driver package.

  On the other hand, you could install the operating system without the use of SATA drivers.
  I think that the BIOS must contain the SATA mode option. Usually it s set to AHCI. Pass this option in compatibility mode and you should be able to install the operating system.

  Cheers mate

• My Satellite cannot recognize the new HARD drive

  I bought a new hard drive for my laptop. After installing it, I didn't get the message none found a fixed drive. I updated the bios from the Toshiba site and the same message is still there.

  I also tried the drive in another laptop. It has been recognized correctly, so I formatted one installed Windows XP Pro top. It worked ok so I tried again in my laptop but message saying put system disk and press any key. So I put XP disc in it starts the installation starts to transfer files and doesn't give the message no hard drive found so it still does not find the hard drive.

  Please can someone help?

  Ken

  Hi Ken

  It would be nice to know the name of cell exactly.
  I guess that the BIOS does not recognize the HARD drive due to the size of the HARD drive.

  It would be very interesting to know if the HARD disk is compatible with this laptop and supported

• Tecra P4 not to recognize the new HARD drive

  Hi all

  I have a Tecra P4 - PTS40A-02100V, which does not recognize the new drive of 80 GB Hitachi (HTS541080G9SA00). The laptop is out of warranty and replacement drive was purchased. This is the second new floppy disk that the supplier sent me. The provider is an official supplier of Toshiba in Australia. Customer paid ~ $400AUD to the drive, if that could be a costly exercise.

  I am able to get a vanilla Toshiba restore to work on the PC, but our organization uses WinPE based boot environment PXE for the kickoff of image and the version of Windows XP. It is not possible to use a generic Windows XP in our environment.

  DiskPart in WinPE will not recognize the disc. Partition Magic and other popular applications will recognize the disc, others not. I can create an NTFS partition and format. Can create basic MBR and MFT, no chance to recognize. Also, I can use the drive in a caddy USB Windows XP on another end PC.

  This new drive appear the same questions in a known working P4. I don't see any option in the BIOS to work around the problem. I updated the BIOS to v3.20, but the result is the same.

  Clues?

  Hey Buddy,

  Just to test: is it possible to install Windows from the Toshiba Recovery disk? Have you tested this?

  And interesting to know what the authorized service provider said of this behaviour. Did you already ask guys?

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• 860-160SE Phoenix envy: how to get 10 Windows to recognize the new hard drive

  I installed a new WD Black 2 TB hard drive and the BIOS sees it, but Windows does not. It is not found in Windows. What I am doing wrong or do I need to put in place?

  Hello

  You can see Windows disk management? You must initialize and give it a drive letter and Windows 10 should see under Explorer files (old Windows Explorer).

  To access disk management please use search (or Win + Q) and type "Disk management" and then click the Service.

  Kind regards.

• Windows 7 does not recognize the new hard drive during installation

  My Pavilion hard drive died.  I ordered a new identical and it arises.  Windows 7 starts to load (since a key USB as my DVD died a long time ago) and gets it Windows on the screen asking me to select a player.  But there is no choice to drive in the menu and I can't go any further.  Is the new drive dead too?  Someone suggested that I need to reinstall a 'chip game' and if that's the problem, how to do that?  Thank you!!

  I'm glad that the hard drive is seen now.  To the extent where the DVD player, if you have purchased a new DVD player for the laptop, and you have it installed, then there is something else involved here.  In this MANUAL, it seems that it is just a simple operation change out.  Must be another reason it does not work or is recognized in the BIOS.

• Satellite 2805-S603 does not recognize the new HARD drive

  The old HDD that laptop died a horrible, another bougth - HM040HC (PATA) of Samsung, but the HARD drive is not set! What?
  Too recent for 2805 controller?
  Which one i should buy, he worked normally?

  PS: Sorry for the bad English-_-

  Seems that you have purchased a HARD drive badly and is not compatible!
  I discovered that IE Toshiba MK3017GAP HARD drive is compatible with your laptop.
  This HARD disk supports an ATA-5 interface and about 30GB.

  If you want to be sure that the HARD drive works in your laptop 100% please contact the service provider authorized in your country and order the HARD drive support.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Need help to install the new hard drive in Satellite Pro M10

  Hi all

  My hard drive died in my M10 Pro Satellite so I decided to adapt to another.
  It fits very well in the caddy, but just does not want to slot into place correctly as something seems to be stopped.
  The M10 only accepts a certain brand/model?
  Also, nobody knows this as the largest capacity M10 will accept?
  Thank you very much.

  Concerning
  J

  As much as I know should not be problem at all. Take the old and the new HARD drive and compare the connectors. I hope that they are the same. I can only imagine that the new HD is not placed correctly in the HARD drive bracket. Make sure that the new is placed as an old man after his retirement from the laptop.

  As for max capacity of HARD drive, there is no precise information and we can only speculate on this. Try to use the search option on this forum. Maybe someone already talked to upgrade the HDD on Sam/Satellite Pro M10.

  The fact is that Satellite Pro comes with 30, 40 and 60 GB hard drives. How many GB does your new HARD drive?

• I changed the hard drive, how do I put on an operating system on the new hard drive

  I changed the hard drive, how do I put on an operating system on the new hard drive

  Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

  Follow the prompts on the screen.

  (142198)

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• Portege Z830 - where can I get the new HARD drive

  Hello

  I have problem with my toshiba portege z830 ultrabook.
  My HARD drive died, and I don't know where I can get the new HARD drive.

  I've got guaranteed but I am forgotten registered my cell phone before when I went for repairs not authorized, because my first problem was with the motherboard.

  This motherboard has been replaced for new ones.
  If my warranty is maybe cancelled.

  Well, that's my problem to another.

  What should I do?
  Please help me. I am available to do anything.

  Hello

  I think that you should first check if your warranty is still valid.
  This can be checked on Toshiba Unitdetails page:
  http://APS2.toshiba-tro.de/unitdetails/

  Where the warranty is valid, get in touch with maintainer authorized Toshiba in your country for replacement.

  But as far as I know the Portege Z830 was equipped with an mSATA SSD drive.
  This means that the laptop doesn't support HDD 2.5 common but requires special mSATA SSD drive module.

  In case your warranty is not valid, you will pay for a new mSATA module.
  Replacement should do a service provider authorized Toshiba as well because this replacement is a little tricky on this model of laptop.