Precision T7500 boot problem after BIOS update

Similar Questions

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• boot problem after bios update

  I was recently asked to install a new update of the bios on my HP Envy 15.

  After that installing Windows 8.1 is turned on and the version of the bios detected is Insyde F.56

  However, before the update, I had a dual boot by Grub2 and now I am unable to run

  the versions of Linux installed in children partitions on the same drive.

  This version of the bios seems to me to prevent the loading of Grub2.

  Can you help me to solve it?

  That's exactly what I did before:

  (1) linking boot-repair a liveUSB / recommended repair.

  (2) press ESC during startup / press F9 / select Ubuntu in the boot menu / start Ubuntu / run Startup Repair / recommended repair.

  In the case that grub won't load and windows starts.

• UEFI problem after BIOS update

  Hello

  I've recently updated the version of BIOS for the Envy 15 J049TX.

  After the windows update shows "not properly configured SecureBoot.

  Please suggest a solution

  Hi Provost,

  I'm happy to announce that I have overcome the problem of activation of the SecureBoot. I saw an option in BIOS-> setting-> 'HP Factory loading key' Boot. After I loaded the default keys to toggle SecureBoot option has become active and I was able to activate SecureBoot. I applied the last update of the BIOS and has been able to activate SecureBoot successfully after the update.

  I wanted to know if this method is safe and that there can be no other effects on the other parts of the system.

  Thank you very much for the help.

• PAVILION NOTEBOOK 15 K7Q21EA #: SCROLLING WINDOWS PROBLEM AFTER BIOS UPDATED 10 (08/03/2016) PAVILION 15 YESTERDAY 16/10/2016

  CANNOT CONTROL THE SCROLLING. CURSOR DOWN TO THE LOW WHAT MAKES IMPOSSIBLE TO SAVE TO A FOLDER

  Hi @STICKMAN5124,

  Nice day! Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. It will be a pleasure to help you.

  I saw the post and understand that after only a bios updated cursor drops down due to a problem of scrolling.

  Impressive work, do the update of the bios. Kudos to you for this. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP. You have been great to work with.

  Please check in F2 diagnostics if the scrollbar works correctly. If Yes, then you can update the chipset drivers and http://hp.com/drivers touchpad drivers you can also consult with a mouse external further isolate the issue.

  You can also run diagnostics on the touchpad from this link by going to the UEFI F2 diagnostics: http://support.hp.com/in-en/document/c03467259 please run the complete components. If any component fails, please note the failure code. This is done to determine if the problem is hardware or software partners.

  If it passes and scrolling works very well, please perform these updates. If you are still having the same problem on page F2 UEFI (screen) then you could roll back bios after performing a hard reset. Link for the hard reset: http://support.hp.com/us-en/document/c01684768

  • Please perform this step to roll back bios.  Hold down the "Windows" key and the letter "B" at the same time, then press the power also button for about 5 seconds at the same time.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Tecra 8100 problem after BIOS update

  Greetings
  I have a tecra 8100, 700 mhz with 256RAM,.
  and it works a treat, until I decided to update the BIOS, the date of the previous version was 1999!

  As I run an OS linux on this unit, I downloaded a version of the Bios boot image and loaded on startup, it reported the success of the update.

  My problem now is that the system starts fine but extremely short slow,.
  It takes 15 minutes to start and is virtually unusable.

  I ran several tests of comparative analysis and tests of memory of Hiram boot CD and the only problem in the report was my 700 CPU running at 114.82. And of couse running, the CPU runs at 100%.

  I deleted the cmos data and be restarted using the default BIOS settings.
  Long searched the net and cannot find an answer.

  Help, please.
  was soon Munka

  Post edited by: munka

  Hello

  I visited the European driver of Toshiba page and found the latest version of BIOS that is 2, 50 - WIN.
  Do you use it?

  The BIOS can be updated only run under windows! That's why I m surprised that you were able to update the BIOS, the Linux operating system running on this computer.

  Try to download the most recent BIOS version and update as described on the help page of the BIOS update.

  concerning

• Satellite P100 - boot failure after BIOS update

  Hello

  I wanted to update BIOS on my Satellite P100 - (PSPADE) with the latest version, downloaded from the Toshiba site.
  Quit all applications.
  Run the zip file error file not found %path\phlahnt.sys.
  Keyboard not working unable to stop even by using the power button / stop.
  Laptop shutdown unplugged and battery removed.
  More boot Message No, no. Beep, nothing.

  I tried with the CD of restoration with power into the F12 key, but nothing.
  I also tried to power up with and without AC connected and with and without battery, but still nothing.
  Plug, battery, at the time led the power leds and speakers also on
  Any help? Any suggestion, any idea?

  Thank you very much
  Nour

  Hello

  Hmmm what to say. Sounds not good and in my opinion, looks like you have successfully updated the laptop computer with a bad BIOS or something went wrong during the BIOS update process
  Are you sure you used the right BIOS of 110%?

  It seems that you will not be able to fix this problem yourself, without any additional help from the laptop technician.
  In most cases, the BIOS has to be flashed again on the particular way

  For me it s clear, you will need to contact the ASP to get rid of this problem

  Best regards and good luck

• Satellite Pro A200 - problem after BIOS update

  Help!

  Tried the BIOS update, got the screen blue, computer laptop doesn't work anymore, any chance I can reset the BIOS?
  Sorry for the vaugeness of the position enough to receive the message without reason below

  "Your message contains profanity or inappropriate language. In the interest of your fellow forum users, we ask you to change your message. »

  Hello

  I'm sorry to hear that. It's a really bad situation now. Unfortunately, I do not believe there is something you can do alone and I'm afraid that you need professional help.
  The best thing you can do is to contact the nearest authorized service provider.

  They can help you.

• Pavilion g6-2006ax: no boot device after bios update

  I flashed the latest bios for my model to win 8 64-bit, and then when it restarted, it says no boot device, the bios detects no hard drive can boot from USB but when I try to format or repair it is detected no drive to do. I took battery cmos out and get out again but nothing. I also tested the hold down windows but with the b button and the power up and let go of all keys but the remaining blank screen bios recovery does not pop up. How to return to old bios?

  the laptop booted from the external hard drive, then I flashed the bios back to the old and it worked!

• Satellite A660 - 190 (PSAW0E) some problems after BIOS update

  Hey,.
  After updating the BIOS for my Satellite A660, I have some problems with toshiba apps 2:

  * 1. HWSetup - is not working. When I try to open it there is an info: *.

  + "Microsoft Visual C++ Runtime Library
  + This application has requested the execution to terminate in an unusual way. +
  + Please contact the support team of the application for more information. » +

  * 2. FN key is not working *.
  (a) after the installation of the package of added value + Toshiba Wizard cards Flash Utility
  * When I hit FN keys I don't see the keyhelper on the screen, pressing FN + F6 or F7 or others - there is no action
  * the keys are not working and I can set up and then

  (b) after uninstalling VAP + Assistant Toshiba + cards Flash Utility
  * When I hit FN key I still don't see the keyhelper, but I can change for example brightness by pressing FN + F6 or F7
  * the keys work correctly, but I can't configure the

  Anyone can solve this problem WITHOUT having to reinstall the system?

  Toshiba Satellite A660-190 (PSAW0E)
  Microsoft Windows 7 Home Premium

  Hello

  Try this:
  -Uninstall the VAP and Flash memory card Support utility
  -Install CCLeaner and clean the system and register using this tool
  -Now reboot the laptop and install the latest version of VAP. Use the VAP Advanced installation option and check if all the components of VAP are checked.
  -After installation of VAP, restart the laptop and test the FN keys.
  -If the FN buttons would not work, install Flash memory card Support utility.
  -Restart and test

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• NB100 problem after bios update

  I've updated the BIOS with the xp operating system. But I found something wrong with it.
  1. the BACKSPACE keys and Fn (function) are no longer usable. And I go in the back to check, the keys cannot be used.
  2. when I install the driver for the touchpad, there is a problem. The xp gives a noisy sound.
  Who can help me to explain and solve these problems.
  Thanks in advance!

  If you are in the United Kingdom, I suggest that you contact the help below Center.

  http://UK.computers.Toshiba-Europe.com/innovation/generic/Customer_Contact

  Perhaps with a Microsoft machine, you may have more luck than use on 'open source '.

• Satellite L500-1ZP - sound problem after bios update

  Hello

  Yesterday the update of the bios is installed and everything went well. The only problem is when I now plug in my headphones, the sound also comes through the laptop speakers. Before the update to the bios that the headphones sound when I connected them.

  What can I do about it?

  I have Windows 7 x 64

  Thanks in advance.

  No problem, buddy! :)

  But thank you very much for this useful information!

• Re: Satellite L500-1XL - display problem after BIOS update

  Hello!

  I recently received a Satellite L500-1XL, works fine until I gave it to my friend...
  The problem is that he has updated the bios to V 2.10 (don't know why) and since then, the image on the screen appears as 15.4 "even in the bios.

  Any ideas what could cause the problem?

  Thank you

  Can you please make a picture how he looks in and post here?
  2.10 is the right version and I really put t understand what is the problem.

  Toshiba welcome screen appears as usual?

• IdeaPad Z500 brightness problem after bios update

  Hi, I have a Z500 Ideapad with a W8.1 installed on it. I have updated the bios to the latest version but after that I can't control the brightness level more. When I try to do it by pressing the shortcut key it trurns lowest brightness level and I can only fix by pressing the patch at the start of the laptop. I can't go back to the old version of the bios. What should I do? can anyone help please. Thank you

  You can update or reinstall the display driver and check that brightness is identical to the front.

  Steps to uninstall the display driver
  1. open Device Manager
  2. go to graphics cards, right-click, choose uninstall and then restart your computer.

  Download and install the latest video drivers at the bottom of the link given
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS032587