Predator G9 - 591 - 70XR RAM and M.2 SSD upgrade (how)

Similar Questions

• Predator G9-591-70XR - Audio output

  I recently bought a predator G9-591 with GTX 980 m graphics card. When I connect the laptop with my home theater system (which in turn conencts to a TV) via an HDMI cable, everything was great and the audio output is through output Audio Intel. But when I run the game, the sound doesn't come out of the Home Theater system more, according to the portable speaker.

  I guess it's because when I play the game, the phone goes from integrated graphics Intel at GTX980m. I couldn't find a Nvidia high definition Audio System output (both in the Strait and the Device Manager), Realtek (the speaker), and output Audio Intel (integrated graphics card I think).

  That is why I would ask that

  (1) is the GTX980m in the laptop has audio output function? If so, how can I activate it?

  (2) if not in above, can I connect my TV via the display Port and connect the Home Theater via HDMI, so using the display to the video signal output Port and HDMI for audio output signal? Would be the integrated graphics card Intel disabled when switched to GTX980m and not able to output audio?

  In light of the laptop is not S/PDIF output, I don't know he was looking for is a way I can output sound via a digital output channel 5.1.

  Thank you all for your response. I have re-solved the problem myself.

  Turns out that the graphics card of 980 m is attached to the output Display Port and integrated graphics Intel is set to HDMI output. I connected my Home Theatre to my laptop via display Port, which in turn connected to the TV, all is well again, and I can get 5.1 sound when playing games.

• HP ENVY 15-w100na x 360: upgrading RAM and M.2 SSD

  Hello

  I can't find a piece of data (spec) of my (HP ENVY 15-w100na x 360) product and wanted to find the number of RAM slots or if I can update my ram and also is there a M.2 SSD slot avaiable?

  thanx

  @AhmedAmmar

  Your maintenance and Service Guide here.

  http://support.HP.com/us-en/product/HP-envy-x360-convertible-PC-series/8499294/model/8903683/manuals

  Look at page 1.

  REO

• Pavilion dv6-1255-EA: upgrading ram and HDD to ssd

  Hello, my laptop (pavilion dv6 1255-EA portable entertainment I bought 6 years with core 2 due processor, 4 GB ram, 500 GB HDD and AMD catalyst HD 1 GB graphics card) is running a bit slow so I however get a new ssd and / or more than ram would make it faster, I currently have 4 GB of ram and 500 GB hard drive installed in my laptop and I was woundering what are those that I can? Are crucial bullsticks 8 GB of ram and 7 with 9 in ssd adapter compatible? I need an answer as soon as possible because I saw some discounts on these on amazon so that I won't have to wait for black Friday to get them again. And it would also be good if someone also indicates what screwdriver I use.

  Hey @Ajijawi,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I came across your post on the HP Pavilion dv6 - 1255ee Entertainment Notebook and eager to replace the hard drive of 9.5 mm or increase the RAM. Even if it could adapt to the Notebook ok. Queues screws could be different. Here is a link to your service manual page 69 for the hard card. I would really check this before buying new HARD drive. You may need to change so it does not move. The 500 GB SATA 6 GB/s SSD internal SSD 2.5 "would work for this model of laptop including that you have an AMD System.

  This laptop supports up to 8 GB memory system DDR2, 800 MHz, PC2-6400, page 1-DIMM 32 of the manual above.

  I hope this helps.

  Thank you.

• Can I run After Effects with 2.4 GHZ Quad Core i7 Processor, 16 GB of RAM and a new SSD hard drive?

  I have a 2011 Mac Book Pro with 8 GB of RAM and The RAM Preview plays in 10 second Incraments. I want to pull out my hair! I don't have the sum of $ to buy a new computer. If I switch to 16 GB of RAM and get a new drive SSD will work After Effects, or I lose my $$. Please help, I have a very important project. It is about 12 minutes long and I need to add a lot of sequelae to complete my project

  First of all, you have optimized your system: Optimizing after effects of performance - Support Adobe

  Second, it looks like you are fairly new to AE and that your workflow is not very effective. Here's the deal. After effects is not an editing application, it is a graphics and compositing designed app to create shots or short sequences. In addition, I would say that more than 90% of my AE projects are less than 10 seconds, because I created shots (with handles - extra images) I'll change in the body or some other NLE. Some of these comps second 10 have a hundred layers or more. If I had to do 12 minutes into a movie I would fuck the cut first in Premiere Pro to understand what was the best way to tell the story, then each shot than necessary effects would become a separate AE comp. At the very least each scene must be a model. In most of the stories that are told, as a film, a scene are only a minute or two. The average is probably less than 6 seconds. I can't imagine putting together 12 minutes in a single model AE, not because I couldn't, but because I would probably change the "timing" of some of the cuts, edit audio or make some other change before I made and changes in the middle of a project of 12 minutes would be a nightmare.

  Here's how a work on almost all editing projects.

  • First installation in a NLE such as Premiere Pro until the story is logical
  • Put the shots in AE requiring animation or effects
  • Inside AE, I first make a test pencil to check the overview and animation timings with the Panel of the model to 50% or even 25%, and automatic resolution scheduled to ensure that the timing is ok
  • Effects are added and critical frames are checked 100% for color and everything else but I rarely to ram preview several frames because I'm already happy with the calendar
  • The model is sent to the SOUL (Media Encoder) or sometimes the cue to render to render in a production format appropriate (usually 10-bit or better, often a sequence of images)
  • If the model is sent to the SOUL I continue to work on the next shot until I finished all the effects work
  • The effects of rendering images are reduced in the NLE to replace shots in the rough cut and editing is polite
  • The project is then added to the hearing for the final mix
  • The final color ranking is made - usually in the category of speed or resolution
  • The final product is made to a production for archiving format and a format of distribution (usually h.264 mp4)

  There are a lot of bounce back, but it's the most effective way to work on any project. Have you noticed that an overview of full resolution RAM full length does not at any time?

  If installation requires only a few short shots or sequences to AE, I will occasionally use Dynamic Link, but most of the time all the effects work is made. It just makes it much more efficient.

  I hope this helps.

• Predator G9-591-70XR - blue screen AV installation

  My brand new laptop resuses to install no matter WHAT AV which integrates firewall protection. There seem to be a problem before the wifi and blue screens drivber system and I so need to use safe mode to remove the partial installation so that I can boot into windows 10. So far, I tried Eset Smart Security 9, Trend Micro, Kaspersky, etc.. All the crash on to halfway through at the start of the pilots. Everyone sees the same issue?

  HY,

  You can download the new killer networking drivers and try. They fix most of the accidents in the new driver

  Here u go http://www.killernetworking.com/support/driver-downloads

• Satellite Z930-12Z - add RAM and replace the SSD

  Hi all

  I'm new here and read some articles also on the Z930-12Z Satelite but I have two questions on the Satellite Z930-12Z:

  1. What is the maximum RAM for Satellite Z930-12Z? There are two locations inside or accommodation?
  I read this blog, but I don't understand if there are two slots or a slot...
  https://Forum.Toshiba.EU/showthread...Llite-Z930-12Z

  2. could I change the SSD? Is there a maximum GB for SSDS for my Ultrabook? No matter what SSD I install?

  I had these SSDS:
  2.1 Kingston SMS200S3 / 480 G SSD 480 GB (6.4 cm (2.5 '' mSATA)
  2.2 MZ-M5E500BW Samsung SSD 500 GB (mSATA)

  No matter what SSD I install?

  Thank you in advance!

  Rebecca Bugday

  Two DIMM slots with 16 GB support apparently. You won't need 16 GB. Take a set of 2 x 4 GB RAM dual channel, I'll leave a link to a few good things that I use for my cell phone 16 GB

  http://www.ebuyer.com/646124-HyperX-...1779&PKW=&Pmt=

  Also, Yes, of course, you can change the SSD, you will need to get some kind of USB 3.0 in the first mSATA interface and clone the existing drive overall, because laptops do not want fresh windows install.

• E5 - 572 G ram and cleaning of laptop upgrade

  I won't lose the warranty or not, if I go to a local store to improve my RAM memory and clean up my laptop?

  Hello

  Opening the laptop do not cancel guaranteed, until there is no damages, so rest assured you, Cheers

• M9U50AV: Screen HP ENVY15T UHD (3840 x 2160) and hard drive SSD upgrade

  

  1. what kind of display on this laptop have. (dazzle or glare)

  This manual ( http://h10032.www1.hp.com/ctg/Manual/c04691689 ), there is no information to display UHD (3840 X 2160).

  2. the manual says, only i7 processor and 4 GB graphics discrete memory will support STORAGE SATA m2.

  The laptop I ordered has i7 processor but not a 4 GB graphics.  This laptop does support m2 of STORAGE SATA?

  3. If this laptop will not support SATA M.2, what type of SSD should buy?

  SATA, SATA ll, lll, M-SATA SATA, etc.

  Thank you.

  Hi @jihaseo,

  Thank you for your update.

  I am unable to say if the screen you ordered is glare or not.  Please, contact the HP support and have your order number to reference them. They should be able to answer additional questions to the specifications for you.

  Please contact HP to Contact HP Supportassistance.

  Please post the results for the others see.

  Good luck!

• I have acrobat reader and paid for an upgrade - how to remove a 1 page of a pdf file and insert a page in the pdf thank you

  I have acrobat reader - how do you want to delete the pages of a pdf/how can I insert you pages from a pdf.  It is different from my old version I had.

  Thank you

  To do this, you will need Acrobat Professional or Standard.

• Pavilion 15-ak112nl: ssd upgrade ram and m.2 15-ak112nl

  Hi, before I have to buy my new laptop (Hp Pavilion 15-ak112nl), I want to be sure I can safetly increase my ram and add an ssd m2 without losing my warranty.

  I found this in other discussions:

  "Opening at the back of the laptop is not technically end user, but it is not really difficult. HP most likely does not cancel the guarantee as long as it's done without causing damage. »

  So, anyone with hp staff can confirm that this information is correct?

  Xansoft wrote:
  

  Thanks for your reply, so I can assume that there will be no seals of guarantee at least?

  Fix. There is no guaranteed delicate joints.

• What are the specs if I want to spend my M6-k015dx? RAM drive and hard. (SSD)

  As in size and types. Please and thank you.

  Hello
  
  
  
  For the recommended update specifications you RAM and hard drive (SSD). I have included the following documents for you. "The upgrade (RAM RAM)". This document will guide you through the steps to find what is compatible with your system. As well the "HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekBook HP ENVY TouchSmart m6 Ultrabook - Maintenance and Service of Guide. If you click on the removal procedure and replacing > the procedure of replacement of component then > drive finally Solid state drive (only for models from Intel). Lists SSD drivers that work with your system, as well how to replace the drive.
  
  
  
  Thank you.

• VN7 - 591 G-70RT: installing RAM and SSD m2

  Hi - I recently bought Acer Nitro VN7 - 591 G-70RT and have a few questions about the SSD upgrades

  (1) m2 SSD: can any SSD m2 fits into the SSD slot, I think that the length of the SSD should be 3.15 however can someone please confirm if below SSD is compatible on my Acer laptop.

  http://www.Amazon.com/Samsung-850-Evo-250-MZ-N5E250BW/DP/B00TGIVZTW/ref=sr_1_1?s=PC&ie=UTF8&QID=1441...

  (2) Ram upgrade: upgrading ram is quite difficult involcing withdrawal of the motherboard together, does someone at - it a video guide I can return.

  (3) 2.5 INCH SATA SSD: sometimes down the line, I will be upgrading the SSD HARD, I need to examine particular SSD? or will and SATA III SSD won't work.

  Hello

  M.2 PCI-e work? or is it only M.2 SATA III. The product on the amazon link will be compatible?

  1 M.2 SATA III (SATA 6 Gbps Interface, compatible with SATA 3 Gb/s & SATA 1.5 Gb/s interface)

  2. Yes, it is compatible and it is one of the best SSDS on the market.

  3 Samsung MZ-N5E250BW - 850 EVO m2 250 GB SSD

• SSD for predator G9-591-570 D

  Hello

  First of all, sorry for my English is not my mother tongue...

  I wan't to add an ssd on my new Predator G9-591-570 D but... There are a lot of levels one I'd rather be sure of my choice.

  This ssd is compatible with this computer: Transcend TS128GMTS800

  The size is 2280 and connectors B + M.

  Thank you very much for the information

  Looking to add to or to upgrade the SSD already in your laptop?

  Whatever it is, Yes, the SSD will fit in each slot.  But in the upper slot, she will need the plate of metal Extender.

• Font managers of the RAM and fonts

  Hi all

  I feel that the ability to enable and disable individual fonts using font (font book or third party) management software is designed to eliminate RAM memory (or at least somehow the unloading of the treatment of the Mac).

  I also believe I read that he mentioned somewhere that all fonts placed in the user/Library/Fonts location are always active in the RAM, and this is perhaps why it is important to not just throw hundreds of fonts in this folder.

  I wonder:

  -If above are true?

  -If you use third-party font management software to disable a font placed in the folder User/Library/Fonts eliminates actually he RAM memory (as is probably for policies outside the system of appointed police records)?

  -If none of this is true, then why even should we use font management software to disable or deactivate fonts - why not just let them all turned on if they are not in the RAM?

  I want to make sure that I fully understand. I hope that this will help me make more informed decisions about my workflow of font management.

  I'm under El Capitan 10.11.6, although I don't think that this specificity is relevant.

  Thanks for the informed answers!

  I don't think you are quite correct, I hope someone will correct me if I'm wrong but here is my assessment of the situation...

  All installed or active policies are not loaded in RAM at startup because it would be than a useless on memory limited to Macs. System fonts will be loaded into memory as they are usually required.

  I believe that certain police functions get cached, such as previews of the fonts that are used in some applications, these selection committees are often written cache files stored on the drive that I can tell.

  Installation and activation of the thousands of fonts may cause some problems as apps may need to generate previews of these fonts - for example MS Word has its own custom selector of fonts that use the real font for names selection. Some design apps can analyze or search fonts when opening certain documents with the related font styles. Other applications such as TextEdit, Mail system use based Gatherer so that they benefit the plan puts large fonts in cache.

  The reason of FontBook is to assist in the management of fonts. OS X uses the 'library' system to allow multiple levels of abstraction, by example/System/Library is for OS-level files (stuff own apples), / library of the third parties who rely on the scale of the support system, ~/Library for user specific files. There is even in charge of resources to be stored in/Network/Library for use with a server on a WAN.

  Manage all this complex without a central application. In my view, that order preference is the user on the highest levels, so your own user fonts folder is selected on the system if you named the same way fonts. Part of the idea is also that you can export fonts in your own home library without affecting the other users of the system.

  Third parties also have police managers this attempt to 'do the right thing' based on what documents and applications you use. These are for most major design offices that use custom fonts or is needed to deal with versions of specific fonts, variations and even if the fonts are licenses for specific customers etc.. Fonts dynamically loading & unloading can cause headaches depending on what software you use.

  I do not think that average users need to think about fonts on OS X (beyond adding their favorites occasionally), you may be overthinking it unless you're in lots of design work.

  If you are concerned about running out of RAM, you probably need to install more, get a better Mac or run applications less. Just keep in mind what OS X tent now to use all the RAM available most of the time if not what is the point of installing it?