Predictive text Z10 blackBerry in the space bar

Similar Questions

• BlackBerry Smartphones middle of the space bar does not work?

  Hi all

  I used a company Blackberry issued before, but I just bought myself a new model of the curve a few days ago.

  I had a hard time typing today, and I realized that this is because the part of the space bar does not work. Specifically, if I push on the left or right edge of the space bar, I get a space. But if I press in the center of the space bar, the button clicks but 2/3 of the time that no space appears. So I have to press the button 2 or 3 times to get a space. Or I have to press the edges of the space bar.

  Is this a problem with my specific blackberry or this entire line has this problem?

  I should ask T-Mobile for a repair or replacement? I just got a few days... someone had success treats this issue before?

  Thank you all!

  Hi and welcome to the Forums!

  I've not seen all messages more precisely the space bar. It may be as simple as a dust or dirt stuck under the key.

  If it was me, I take it immediately and get a new one. It may be defective. Why pay good money for something that may have a permanent problem?

  I hope this helps!

  If this answers your question, please close the message by using the options on the key of the kudo.

  Thank you very much!

• BlackBerry Smartphones plate fragile plastic under the space bar

  Hi all!

  I just bought the Bold 2 (9700), and I find that the plastic plate just below the SPACEBAR (between the spacer bar and chromium) goes up and down like a coward.

  When I type and press the space bar or any key in the last line, the plate moves and creates an irritating sound as soon as I pick up my thumb after pressure on the space bar, it sticks a little and let go since his coward & fragile.

  I have no warranty on my phone that I bought an unlocked device and not by the carrier. Can I fix this myself and how?

  Thank you very much in advance

  This plate appears just outside.

  You can even get a new one if you want to:

  http://CNN.CN/shop/BlackBerry-bold-9700-black-bottom-cover-unbranded-p-7689.html

• I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone.

  I'm at my wits end, HELP ME! I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone! This happened to me several times and I can't ever find anywhere. It just disappears. Can someone help me? I want to know why he spends, how I can solve this problem how can I recover my work and where it went! I blame my laptop or windows or the manufacturer?

  I wrote a full description of my problem, but of course it also disappeared. I type 2-300 words and pooofff they disappear I can't explain it better or go on any more because I just it loose once AGAIN all! I tried to explain in more detail a related problem, but of course he gone too so I send this before I lose too.
  original title: email disappears

  The text turns blue, because you mentioned it.  The most plausible explanation to highlight all of the text while typing is due to hit CTRL-A, which is the same as Edit | Select all.  Then when you type a character when this text is highlighted, then highlighted (blue) text is replaced by the character you typed.  Be very careful to not press the CTRL key instead of the SHIFT key when you type a capital letter A or else which will never happen.

  If your cursor jumps around then also scan your system against viruses and malware.

  Steve

• How to disable scrolling of the space bar, but keep the active space as space bar by typing

  I want to just disable the SPACEBAR scrolling of pages in firefox 13.0.1 (or any other not too old version) by all means, maybe I can interfere the code in the files of firefox or is it an official option to disable page scrolling when I press the space bar?

  Thanks it now worked, everything I did wrong (because I've seen this thread before) was download wrong config key, there are a few add-on ridiculous made by another developer with exactly the same name but different functionality
  [SOLVED] (Now also see related 954421/questions/954421 )

• Escape the mouse pointer when you press the space bar

  My tecra has developed a problem where whenever I press the space bar, the mouse pointer out of the screen and the mobile guard in the upper right or sometimes down left for about 30 seconds then stops. happens in all weather conditions of applications that I use an optical mouse or the touchpad

  Hi Dave

  I had the same problem. Initially, the mouse was mad for 30 seconds, but shortly after, it was worse. I switched the keyboard and now everything is ok.

  Of course, the pointer of the mouse was defective. I'm sure that in your case the problem is the same.

  Good luck!

• 3 weeks ago, I bought a new macbook now the space bar doesn't always

  How many people have had problems with the space bar on the new MacBook does not work after only 2 weeks and if so apple have hw set.

  I noticed that a few people have had this problem

  Go to an Apple store they'll do their thing then it will be

• L50 - A - the left end of the space bar satellite do not give the entrance to space

  Everytime I try to press the space bar the left it does not press and do not give the entry space is needed.
  How can I overcome this phenomenon (os Win 8.1)?

  Why do you think this could be a software problem and what part of the software should be responsible for this?

  I guess that's just a keyboard problem.
  You can also check the functionality using external USB keyboard.
  If USB keyboard works properly, the internal keyboard could be affected

  By the way: is updated your BIOS up-to-date?
  If not, try to update the BIOS in the past of the keyboard problems could be resolved with BIOS update.

• Tecra M2 - if I press the space bar moves the cursor on the screen

  Hello

  I've reloaded Windows XP SP2 on my Tecra M2 today but have found the when you type if I press the space bar, the cursor moves on the screen, the cursor does this for between 10 and 30 seconds, it is not a major problem but it is a bit annoying.
  I installed all the drivers and utilities. Any help would be appreciated.

  Thank you
  Wez

  This occurs if you disable the touch pad using the FN + F9 key combination?

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.

• My "and"do not appear until I hit the space bar?

  Hello

  As written in the subject, my Yoga, "" do not appear until I hit the space bar.

  A as the default? or there is a way to change this?

  Thank you.

  Hi khorkhorjin,

  Thanks for posting in the community of Lenovo,

  Could you please check the wording of the key of the Control Panel then language and region and after this language

  Press keyboard and languages and check the keyboard input language and ensure that its language: English United States,.

  Hope the helps of information. Let us know.

  Concerning

• How to change the behavior of the space bar

  About this project being improved UI: http://forums.ni.com/t5/LabVIEW/keyboard-focus-on-indicators/m-p/3260505#M951052

  I would use the space bar to "tab" in the control. Play with the UI, I quickly realized that the space bar is currently the key ENTER, i.e., alternate control if it is to the point. Implementation of the function of the tab for the space bar will prevent it from also serve as ENTRY? How could I set up in case the structure of the UI control?

  Thank you

  First: My advice is "don't do that!"  Development of control tab is normal behavior in windows.  Space bar is another thing that space is abnormal - in fact, those of us who don't use auto-outil selection are called 'Tabbers' not 'spacers' even if the space bar performs a function of scrolling simillar tool!  Most 'Tabbers' don't even know that because the tab is more consistent with the 'Normal' applications  Select a key and hold that is already filled in the desired control key navigation properties tab.

  Now, after hearing this advice, you still feel you MUST redirect the bar of space you can hack the enum which fills the property drop-down editor.  But I highly recommend.  Best, talk to users and get their 'Story' on how they would have ideally to navigate the user interface with a frank discussion about their experiences with other applications and that this application can help.

• Words clump together even when you use the space bar

  It's happened suddenly, so I guess that I hit a key or changed something in a menu somewhere I got updates recently, but they don't usually cause something like this.

  From time to time it may work, but I usually hit the space bar a couple of times. OR I just type all that and I go back and insert the spaces manually. It is a pain to have to do that... This isnewso problem (he is example) (nine so) Imust have changed anything or added something. I can't imagine having to type an essay or something.

  If you could help me, I would appreciate it. I hope it is something simple.

  Thank you

  MK space

  Try another keyboard, looks like the space bar is a failure.

• I want to assign the function 'delete' key between the CTRL and ALT keys to the right of the space bar.

  I have a new Toshiba laptop and would like to change a function key.  I thought I remembered reading that this can be done.  Is this possible or am I just hallucinating about that possibility?  I want to change the allocation between the ALT and right CTRL keys right key of the space bar.  Help me, please!

  Hi Marion O.Lawrence,.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  There are some third party programs to rebuild the key, you must use your favorite search engine and the search for the program.

• CRNT open anything without right click logoff crnt must press the space bar to click on logoff

  CRNT open anything on the desktop or journal by clicking the mouse, I have to press tab to get it on the sign out button, then press the space bar

  Hi maxinew,

  1. don't you make changes before the show?
  2. What is the brand and model of mouse?

  Try these steps and check the result.
  Step 1: Check your desktop configuration
  a. double click on my computer.
  b. on the Tools menu, click Folder Options.
  c. under the general tab, make sure that double-click to open an item (single-click to select) is selected.
  d. click on apply to save your changes to settings.
  e. click ok and close the computer window.
  f. check if the problem persists.

  Step 2: Reset the buttons of the mouse on their values
  a. Click Start, point to settings and then click Control Panel.
  b. double-click mouse.
  c. on the tab buttons, click default settings. If the problem is only with a specific program, click on the settings button, and choose this program and then click default settings.
  Note: If the default settings is not available, all your work button is already defined for the default mode.
  d. click OK and check the result.

  See the problems with the mouse button or scroll the parameters

  Visit our Microsoft answers feedback Forum and let us know what you think.