Premiere page do not disappear after the first run

I just installed the latest firefox (9.0.1) and as usual, the first immediate window rises, explaining my rights etc. It is fine and normal. My problem is that no matter how many times I reboot my computer or browser, this first run page does NOT go far. It's like I'm running my firefox for the first time, every time. How can I fix this so I can just have my choice of the right browser?

Hi ShadoGazer,

You should look at this article on this specific issue and Preferences not savedarticle. It should give you all the information you need!

If this does not work:

  1. Enter about: config in the address bar
  2. Click I'll be careful, I promise you if prompted
  3. In the filter field, type Startup
  4. Double click on startup.homepage_override_url
  5. Delete the text string, and then click OK
  6. Close Firefox and reopen the window to check that it worked.

Hope this helps!

Tags: Firefox

Similar Questions

  • Windows 7 Pro 64-bit not start after the first update.

    Integrated system:

    Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

    CPU: Intel Core i7-930

    Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

    HD: Western Digital Black 500 GB SATA 3 Gb/s

    Water cooler: Corsair H50

    The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

    First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

    The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

    Can someone help me with this problem?

    Thank you

    M. Vilela

    Hi Danielle,

    In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

    Step 1

    You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2

    If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

    To view the update history, follow the steps below:

    A. open the control panel (all items view) and click the Windows Update icon.

    B. click on the link to view update history.

    To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

    Step 3

    I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

    To restore the operating system to an earlier point in time, follow these steps:

    a. Click Start, type system restore in the search box and then in the list click on the system restore program.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    b. in the System Restore dialog box, click on choose a different restore point and then click Next.

    c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

    d. click Finish.

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I've updated to Lightroom and now I can't start, the license agreement will not disappear after the acceptance of this

    I've updated to Lightroom and now I can't start, the license agreement does not disappear after she accepts any ideas?

    Hi Patricia,

    Please let us know very little about, so that we can fix it as soon as possible.

    What operating system are you using.

    You use Lightroom(5/6) as a Standalone Version or its CC.

    In addition, please try and update Adobe Application Manager on your system. See link: can not accept the product launch and end-user license agreement

    Once his finishing update, relaunch the Lightroom and see how it works.

    Let us know if it helps.

    Kind regards

    ~ Mohit

  • BrowserField loads pages initially, but does not work after the first load

    My app displays pages within a BrowserField. The app is basically a wrapper for a Web site, so a lot of navigation should take place within the browser. When the page first loads, it loads the site very well, but if you click on one of the links, it never loads the page.

    Unknown, the entire application works fine in the Simulator, the first page and all other pages load fine. You can click on any link, and it will.

    I have a BrowserFieldListener and a BrowserFieldController to detect when a page is loaded (at the end of the animation to load and display the browser) and when the user clicks on a link (to start the loading animation and hide the browser). Breakpoints in both of these functions (handleNavigationRequest and documentLoaded) show that the first time, the two are achieved, but when the user clicks on a link, handleNavigationRequest is in the race, but never documentLoaded.

    Does anyone have any idea on this? She was driving me crazy. I don't understand why it works in the Simulator, but not a real device.

    -Thank you

    Solved my problem. A BrowserField won't do anything if it's not attatched to a Manager. Why it loads the original page without being a manager is a mystery, but keep it on the page can load very well.

    Who knows.

  • Some pages are not loading after the last update v39.

    After the updated 07/07, pages many (but not all) which worked well previously are now time and need to be recharged to load (for the first time, somehow). Started by clearing cache, then checked for malware and ended by reinstalling Firefox. I copied my profile, rather than starting from scratch with extensions (about 5 only execution).

    All of these problematic pages open correctly in Internet Explorer.

    Any ideas? Thank you very much.

    As test, please disable McAfee. It caused problems.

  • Service "XE" disappeared after the first reboot

    Hello, I am facing a strange problem, maybe you can help me.

    I installed oracle XE version 10.2.0 on Centos 5.0 as root
    the installation went well and everything worked for me, but after I rebooted my machine
    I can't connect to the DB from a remote computer and also I can not access to the
    DB home page (http://127.0.0.1:8080/apex) on my local machine.

    I tried to study the question, and I found something strange.
    After the installation (when everything was still working).
    the command 'lsnrctl_status' gave this result:
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 01-DEC-2009 18:31:42
    
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    ------------------------
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date                25-NOV-2009 16:35:50
    Uptime                    6 days 1 hr. 55 min. 51 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Default Service           XE
    Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
    Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "XE" has 1 instance(s).
      Instance "XE", status READY, has 1 handler(s) for this service...
    Service "XEXDB" has 1 instance(s).
      Instance "XE", status READY, has 1 handler(s) for this service...
    Service "XE_XPT" has 1 instance(s).
      Instance "XE", status READY, has 1 handler(s) for this service...
    The command completed successfully
    now, after the reboot, the "lsnrctl_status" command returns this result:
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 01-DEC-2009 19:07:41
    
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    ------------------------
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date                01-DEC-2009 18:39:34
    Uptime                    0 days 0 hr. 28 min. 6 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Default Service           XE
    Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
    Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    as you can see that all the associated XE services disappeared and the summary of endpoints is also different,
    Why is this? That's happened?

    either way, my listener.ora looks like this
    # listener.ora Network Configuration File:
    
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
          (PROGRAM = extproc)
        )
      )
    
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
          (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
        )
      )
    
    DEFAULT_SERVICE_LISTENER = (XE)

    origin this host name?

    I do not know. And what is vcentos ?

    I take a look at the configuration of your network, and then try to change your/etc/hosts, something like

    127.0.0.1       localhost.localdomain localhost
    ::1             localhost6.localdomain6 localhost6
        
    
  • T400 does not start after the first display screen

    What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

    I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

  • CS6 flash does not start after the first time.

    Hello! I installed Flash CS6 creative cloud in a previous version to open some old files. It works fine the first time you open it. After you close the it and try to open again, it shows the popup flash for a second and she disappears. Same thing over and over. After you uninstall and install again it opens for the first time and same problem after that.

    Any thoughts?

    It worked:

    Navigate to:

    C:\Users\«yourusername»\AppData\Local\Adobe\Flash CS6\en_US\Configuration

    There is a file fontinfo.txt. This opens up in Notepad and remove all what it and save it, but before you start again Flash, change the properties of this file fontinfo.txt for read only so Flash cannot crush him again.

  • My home page is not coming on the first page.

    When you go to my basic (primitive) www.boulevardrental.comWeb site. The 'second' page, awnings, comes first instead of the home page. How can I get the home page to be the first page when someone clicks on my site.

    Thank you

    Jim

    It worked. Somehow the two pages have been listed as index (?). So now the House is now index. They lived.

  • My compiled program crashes after the first run (LabVIEW 2009)

    I have a compiled program created with LabVIEW 2009 which, in the first round, once the computer is restarted, works fine but after discontinuation of the program, it will not work properly.

    The program uses a compiled Launcher to dynamically activate a set of VI containing the expectation driven by State Machines (QDSM).  Begins subsequent program launcher module appears fine, and his progress bar shows that she starts each of the VI.  Once the Launcher is complete it removes memory launched Dynamics VI and caressed.  The spear that do not reach the main UI that VI is barely long enough for the observer to see (if there is one) then stops.  The program then went from memory I can say.  There is no process in memory or anything.

    Also, when I try to run the installed version of the exe file on a computer with installed 2009 development environment I get this behavior consistently successful launch once again.

    In both case, my program does raise all errors (that are connected), or runtime generates everything I can see.  Also, when I run my program in the development environment the program does that way.  He has no problem at all.

    I have used this style of architecture front of LV8.6 with all the problems.  Can anyone suggest some possible solutions or even a few debugging tips?  I've never had a problem that I could not duplicate in the development environment, so I'm not sure how to start to attack my question.

    Thanks for any help.

    Jason

    I solved the problem I think that (at least with regard to the tests on this point revealed).   After that I added the possibility to connect the past States to of the QDSM, I was able to determine that the program was 'plant' after that I dynamically closed the Panel front of the Launcher.  My program is designed to close the Panel before the pitcher, then pop up the façade of the main user interface.   My EXE is inspired to hold the Launcher with my other files QDSM kept outdoors in specific directories.  What seemed to be happening is that when Launcher closed its façade and before UI opening upward the runtime engine decide since it is y no Windows Open he was closing down.  It's my guess on what might happen any way.  I modified my code to change the Launcher window to hidden and delay for 1/2 second to give a chance to fully start running to the main user interface.  This will correct the problem, or at least worked around her.  If someone out there can explain me exactly what is happening that I sure would appreciate it.

    Thanks for all the help that those of you who responded.  Your advice has been very beneficial and certainly led me to a faster resolution.

    Jason

  • Other results: preliminary report does not properly during the first run in a loop

    I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

    Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

    If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

    The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

    You can see this described as stage 15 in the following link:

    http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

    Kind regards

  • Why my sequence does not disappear after the export of the project?

    After a late night of editing, I made and exported the project (mp4). This morning the customer requested a change, but when I open the project, media source is here. There is no sequence, and I could not find the file. Suggestions?

    (First project in Premiere Pro after several years of use of Premiere Elements).

    the sequence should be there, but I have nothing.

    Well, the only two possibilities are that you just have not yet found, or someone really delete.

    If you remember the name of the sequence, you can search for it at the top of the project Panel.

  • Why my app store does not disappear after the update to 9.2.1?

    After that I updated my iPod touch 6th generation iOS 9.2.1 My App Store has disappeared. Can you tell me why the App Store could do something like that?

    Looks like that the Restrictions had lit so that the App Store. Go to settings > general > Restrictions and see if the App Store options are enabled under "allow". If they aren't, turn them on and your App Store icon again.

    See you soon,.

    GB

  • Why my previous versions of Adobe software do not disappear after the upgrade to 2015 CC? I have packets of filter that I bought for Photoshop that I can use is no longer.

    I use Photoshop CC and CC2014 to filter packs I bought, and now all older versions of Adobe disappeared.

    Hi Michael,

    By default, when you install Photoshop CC (2015) it allows to uninstall older versions of Photoshop CC you have installed.

    Please refer to the article on how to install an older version of Photoshop.

    https://helpx.Adobe.com/creative-cloud/help/download-install-app.html#topic-3

    Please post on the Adobe Forums.

  • Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

    Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

    Thank you!

    Hello

    Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ========

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for