Premiere Pro CS4 - problem with the monitor program.

Similar Questions

• Problems with the monitor program size?

  Hi all

  I was editing a sequence and things were dandy until the program screen size has changed for children.

  Here's a screenshot if you want to take a look:

  

  Here, plays the same video, but in the source monitor, the width of the screen is longer while the width of the screen of the program monitor is also enlarged and lower.

  Can someone help me get both screens, the same magnification and width?

  They have the same magnification (both on the adjustment) and have the same resolution if that helps...

  Thank you

  videosandrobots

  The sequence settings match the layer source footage?

  You seem to have HD or source on the big screen and a sequence of DV (SD or 4:3 aspect ratio)

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Premiere Pro CS4 Setup error - 'the Installer database is damaged. Please contact Adobe Customer Service.

  I had to replace my hard drive and so I had to reinstall Premiere Pro CS4. I tried to do with the files that I had downloaded before, but the installation failed and gave me the error message "the Installer database is corrupt. Please contact Adobe Customer Service.

  I assumed that the files I downloaded have become corrupted, so I opened a session and re-uploaded the files ADBEPPROCS4_LS7.7z and ADBEPPROCS4_LS7.exe. I ran ADBEPPROCS4_LS7.exe and it also failed and gave me the same error message. I tried another download on a different page and got the same error again.

  Can anyone suggest what I can do to get my program installed?

  Error «...» The Installer database is corrupt... "when you install Adobe Creative Suite 4 or point product

• Premiere Pro CS4 video fills the whole frame.

  My Windows Movie Maker has stopped working so I bought it and I regret it completely. WMM is so simple and straightforward. I don't want a software that takes a genius to use. Even I could design a better software.

  In any case, for some reason when I import a video on my project it fills the screen. It is black boarder thick around her. I did research it and I saw a lot of things on the elongation or something like that. But I'm not a computer genius and adobe is expected of course as everyone else so I was wondering if someone could help me. Thank you.

  Heres a pic so it can help.

  [IMG] http://I54.Tinypic.com/jpvjhx.jpg [line]

  Welcome to the forum.

  When its assets are either zoom-in, or have black bands around them, in the timeline, it is usually because the predefined sequence/project does not have the 100% source footage.

  In CS4, when you create a new project, they will set some preferences global and then invited to create a new sequence (chronology). It is here that we will need to know the full specs. their source files, and then select a predefined sequence to match these assets 100%. There are many Presets and then one 'special', the desktop Preset. What makes this 'special', is that you can set almost all the parameters for costume/game, such as the size of the image (this is where you are off), FPS, etc.

  If you can tell us the complete specifications. of your source footage, anyone can tell you exactly what Preset to choose, or how to customize the desktop Preset to match. That will fill your frame perfectly.

  PrPro from CS4 has the ability to have different sequences for different sequences, in the same project.

  Now, WMM is well enough designed to deal with standard WMV images, is very limited on the one hand, but on the other hand, simple to use - many, many fewer choices to make. It's 'standard', or nothing.

  When you have explored the power of PrPro and get used to the implementation of your footage, you will come to love him. The 'power' is intoxicating, and operations will become second nature.

  I highly recommend a great book, Adobe Classroom in a Book for Adobe Premiere Pro CS4, Adobe Press. The author you will return you though first the concept of using a NLE (of Non-linear editing), then give you a tour of GUI (Graphical User Interface) program. Then, although the use of resources and projects, you will return the reader through all aspects of the process of with PrPro CS4 edition. When you are finished, there will be very little, that you will not have been exposed to. Curt spends a good part of the time by saying the drive all on the 'why' and not only the "how".

  PrPro-Wiki has a great FAQ section on how to do most of the things in CS4 and should be bookmarked.

  Believe me, the operation will change from 'rocket science' to 'second nature '.

  Good luck

  Hunt

• OfficeJet Pro 6835: Problem with the print head - Oxc19a0003

  Just bought the Pro Officejet 6835 this month of April and now the print screen shows "Oxc19a0003, there is a problem with the printhead". Had tried a hard reset of the e power cord does unplugging and is still showin the same error. Can't find a number of HP support, I can call or chat online. Help, please!

  Hello

  Its unfortunate to see this error on a new pritner.

  The error appear while you were setting up the printer for the first time, before installing the ink? (Yes/no)

  The error appear while you have been putting in place of the printer for the first time, after installation of ink? (Yes/no)

  Can I know if you had printed a few pages before the error appeared? (Yes / no)

  The error appear as soon as you switched on the printer? (Yes / no)

  However, please call HP Technical Support for assistance.

• I have exactly the same problem with the radial program point not to let me install mcafee what should I do?

  I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?

  There is some information about this here: https://community.mcafee.com/thread/19119?start=0&tstart=0

  If this does not help, contact McAfee technical support. They should help you.

• Problems of performance of Premiere Pro, no problem with AE

  Hello

  Recently, when I use Premiere Pro, I seem to have big problems. It runs really slowly, the preview always stutters and some projects with many files imported not even loading. I thought it was my computer die, until I started to After Effects. I thought that After Effects is a much more difficult program for my computer to manipulate than Premiere Pro, but it works quite normal.

  Recently, my laptop has been too hot a lot of times, especially when using Premiere Pro. It automatically shuts off safety. Perhaps because he was running this program, some of the files I messed up because of the heat?

  Is there anyone who knows if it's my problem or if there is another problem that I don't see?

  Many thanks in advance!

  4 GB is really not enough.  I sometimes struggle with 24 GB.

  If you do not intend crop your pix, 5000 x 3500 are great - and the fact that they are 9 mb probably contributes to the problem.  Strip unnecessary pixels - which makes the 72 dpi image.  Which will reduce your pix to about 2-3 MB each.   Reduce them to 1920 x 1080 (if you are not pan and scan)

  You probably also have problems with hard drives.  C is going to be difficult to store temporary files with only 9 GB of available.  Similarly, the D is a tad grating.  Are these disks 7200 RPM?

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• Printing problems with the Paint program

  Used the Paint program for years, no problem.  Suddenly, every time I print get a very tiny copy as if it has been reduced by about 75%.  If I try to enlarge before printing, etc., it gives me anywhere between 10 and 20 white sheets before give me a very tiny copy.  I used different printers with the same result.  I love this Paint program and would like to get back to where he was.

  And the program of mystery?

• Problem with the monitor Panel and display driver - first Elements 9

  9 PE worked fine since I bought it two months ago and then this week I opened the program, he stated "we have detected an incompatible display driver. For better playback performance and faster, update your driver. View the details of the driver. ATI ASUS AH450 series 3.0.8673 technologies. Then when the open program of the monitor Panel was not working properly. If I click on the Panel, I can see an image of the video, but when I click to play the video, the sound works well, but nothing happens in the monitor Panel. It justs keep showing the same image without change.

  It was the latest driver but I reinstalled it just to be safe, and he still has the same problem. I have updated first Elements 9 but still the same problem. I am running the application on Windows XP.

  I'm at a loss to know what to do. Why all of a sudden he does it when it works fine?

  Try the suggestions of this FAQ from the library to the right of this forum:

  http://forums.Adobe.com/thread/769303

• I can't use my webcam to computers because of a problem with the cyberlink program

  I only had my laptop for less than a month. I went to use the web camera and succeeded in a first time. Now I can't access the web camera. The message that keeps popping up is a message about the cyberlink program. Can someone help me?

  Hi Lynda Haynes,

  1. What is the exact message you get?
  2. what operating system is installed on your computer?
  3. What is the brand of your laptop?
  4 did you go to the device manufacturer's Web site to download the latest drivers?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Update of your webcam drivers and check if the problem persists.

  Step 2:

  Uninstall and reinstall Cyberlink and check if the problem persists.

  Step 3:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

• Problems with the external program

  I create programs programmer with a string. A job will be created to launch the channel. One of these programs Planner will have to call a file is under windows. Everything goes well with the exception of which translates an error indicating that the process cannot find the files referenced in the external program.
  
  Here is the error of the battery being captured in the job log.
  
  CHAIN_LOG_ID = "16735", STEP_NAME = "L90_ARCHLOGRMANBACKUP", ORA-27370: slave to the job could not launch EXECUTABLE type work
  ORA-27300: dependent operation of the OS: access enforcement officer failed with the State: 2
  ORA-27301: OS Error Message: the system cannot find the specified file.
  ORA-27302: an error occurred in: 6a sjsec
  ORA-27303: additional information: the system cannot find the specified file.
  
  This is the code I used to create the program:
  
  BEGIN
  SYS. DBMS_SCHEDULER. CREATE_PROGRAM
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , program_type = > 'EXECUTABLE '.
  , program_action = > ' C:\WINNT\system32\CMD. EXE'
  number_of_arguments = > 3
  activated = > FALSE
  , comments = > 'runs a RMAN backup compressed all archive logs generated by this process.
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 1
  , argument_type = > "VARCHAR2".
  , default_value = > "/ q"
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 2
  , argument_type = > "VARCHAR2".
  , default_value = > "/ c".
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 3
  , argument_type = > "VARCHAR2".
  , default_value = > 'C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat '.
  );
  
  SYS. DBMS_SCHEDULER. ENABLE
  (name = > ' RTDB.) ARCHLOGRMANBACKUP');
  END;
  /
  
  To verify that the files referenced in the above code and paths are correct, I spent to the DB host and run the following command from the beginning... Run:
  
  C:\WINNT\system32\CMD. EXE/q/c C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat
  
  It works very well.
  
  Someone at - it ideas?
  
  Thank you
  
  -Joe

  Hey Joe,

  What you run here are steps of external string, which are transformed into external work when they are executed (see steps chain) upwards in the view of all_scheduler_jobs so that they are running.

  All restrictions for outdoor work hold for the external chain so that you will always have to make sure that the agent Scheduler service is running as a user who has the logon as batch windows privilege and upward.

  A simple external task works for you? If this is not you should probably get that working first and then debug your chain example later.

  Hope this helps,
  Ravi.