Presario Compaq SR1705UK with Pentium Dual Core processor?

Similar Questions

• Premiere Pro with a dual-core processor

  Hello

  So, I was trying to first Pro CS6 to edit my AVCHD. MTS files. However my AMD Dual - Core Processor E300 couldn't handle files, resulting in "choppy" playback I was wondering if my processor would be better manage your HD files if I the converted to another type of file, ideas or suggestions? And which converter I could use to keep the 1920 x 1080 HD quality? I can't upgrade my CPU, I tried

  I appreciate all suggestions.

  This CPU is slower than molasses in winter, it marks a ugly 630 in the test CPU of the pass mark, where a decent CPU would score more 16 000.

  Forget it. No way it will work, it's far too slow and underpowered. Get a new PC. It will be same triple DV material, not to mention the AVCHD material. It's like asking your grandma to carry a load of 20 tons up a steep hill, with his 50 year old bike. Can't do.

• HP Pavilion: How much Ram can my handful of HP with Intel pentium Dual core CPU T3400 @ 2.16 Ghz. currently 2 GB of RAM

  Hello. How much Ram can my old HP pavilion manage processor Intel pentium Dual core CPU T3400 @2.16 Ghz. currently with 2 GB of RAM, running Win 7 (32-bit)? Thank you.

  From the Manual:

  2 customer accessible/upgradable memory module slots

  Supports dual-channel memory

  Supports up to 4 GB of RAM

  Support PC2-6400, 800 MHz and DDR2 PC2-5300 667 MHz, DDR2

  Up to 4 GB memory DDR2-667 or DDR2-800

  http://www.Amazon.com/Komputerbay-PC2-6400-notebook-lifetime-warranty/DP/B0032CP24W/ref=sr_1_3?ie=UTF8&QID=1456950957&SR=8-3&keywords=DDR2+laptop+memory

  If you stick with 32-bit Windows your system properties will show something between 3 and 3.5 GB of available memory. The processor is capable of a 64 bit OS.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The upgrade of processor Intel Pentium Dual Core T2060 on my Sat Pro - A120-223

  Hello

  This is my basic system:

  Toshiba Satellite Pro A120-223

  Processor: Intel Pentium Dual Core T2060 1.6 GHz
  RAM: 4 GB, recently updated ;-)
  CHIPSET: 945GM
  FSB: 533 MHz

  Is it possible to upgrade my processor? If so, what CPU Intel can I go to? I know that my FSB will limit my options, but it is anyway for everyone... ? AI? m a student of the company in order to process the major statistical software packages; I'm also doing multimedia work for my presentations; I realized that my current processor in this regard runs ok in the intense calculations, but I was expecting something better and more stable? ¦

  If there is a way to upgrade my processor, ja? m wanting to do, but if not, then I should just settle for this one.

  Thank you all for your help, I look forward to reading all your messages.

  Mo98183

  Hey Buddy,

  Maybe you should read this section that relates to your question:

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=104254

  The statement in this thread is simply: it s is not possible.

  Check it out.

  See you soon

• a pentium Dual-Core E2180 processor will work in a Pavilion a1102a desktop computer

  An Intel Pentium Dual-Core E2180 processor will work if it is installed in a desktop Pavilion a1102n?

  Hello:

  No, it won't.

  The best you can do in this computer is a Pentium 4-650.

• Photoshop Elements 10 will work on an iMac with an Intel Dual Core processor?

  Photoshop Elements 10 will work on an iMac with an Intel Dual Core processor?

  Yes. See the data sheet for more details.

  Mac OS

  • Multicore Intel® processor
  • Mac OS X v10.5.8 to v10.7
  • 1 GB of RAM (2 GB for HD video functions)
  • 4 GB of free space (additional space required during installation)
  • display resolution 1024 x 768
  • DVD-ROM drive
  • QuickTime 7 software required for multimedia features
  • Internet connection required for Internet-based services *.

• Intel Virtualization Technology - Thinkcentre A58 - Pentium Dual-Core E5300

  Hello

  I am considering buying a ThinkCentre A58 with a clocked Intel E5300 processor
  Model/type: 7515-7SG

  I would like to run "Windows XP Mode" on Windows 7 Pro.

  For the XP Mode, I need ability IVT.

  My Question is:

  The Lenovo 7515-7SG come with an E5300 CPU which is capable Intel virtualization technology?

  IVT depends on the TECHNICAL Code of the E5300 CPU.

  Intel offers CPU E5300, who do not have the ability of IVT.

  E5300 know:
  http://Ark.Intel.com/product.aspx?ID=35300#specs

  E5300 Code TECHNIQUE

  * SLB9U: IVT No.
  * SLGTL: IVT Yes

  Check the E5300 features supported:

  http://processorfinder.Intel.com/list.aspx?ParentRadio=all&ProcFam=2841&SearchKey=

  Even if Lenovo ships an E5300 with SPEC Code SLGTL - needs a BIOS that does not block IVT.

  ... made the A58 BIOS IVT available?

  I already searched the Lenovo Thinkcentre A58 product support site - has not found something valuable.

  Thank you

  I found the answer.

  I'm sitting in front of a whole new Thinkcentre A58 7515-7SG equipped with a Pentium Dual Core E5300

  http://forums.Lenovo.com/T5/welcome-FAQs/tool-to-check-support-for-Windows-XP-mode/m-p/167695

  Detection of virtualization hardware support tool says:

  This computer is configured with

  hardware support for virtualization.

  Great!

  My A58 can run Windows XP Mode

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

• Satellite L30-105: an Intel Pentium Dual Core slogan says, but I have Celeron

  Hello

  My machine has an Intel pentium, near the touchpad sticker that says "* Pentium Dual Core inside." But then the information system listed my CPU as * Celeron *...

  Have I been duped and is this false advertising?

  Thank you

  Mark

  Hello

  I have goggled a bit and found that this laptop Satellite L30-105 was certainly equipped with the Intel Pentium Dual-Core CPU T2060 1.6 GHz.

  I m similar L30 owner as a second notebook and at first start, I noticed that the Device Manager recognized the incorrect CPU.
  I've simply removed the entry CPU since the Device Manager and rebooted again the Vista again recognized the CPU and advised the right CPU.

  Please check this box. Maybe it helps.

  Greetings

• threads, processes and the dual core processors

  Hello

  We use the CVI and we want to use multithreading. The application is running on a dual core processor, so the question is if it is possible to define the basis on which the thread is running? Does anyone know if it is possible to start a program, process, or a thread on a predefined kernel?

  If this is not possible with the CVI, is it possible directly with the Windows API?

  Thank you

  Oliver

  AWESOME, thanks I'll try.

  Greetings

  Oliver

• LAVIEILLE and Vista & dual core processor

  Hello

  I have new PC with dual core processor and Vista program. When I try to install the program LELA ask X 86 processor. I have the router broadband WRT54G2. Help, please!

  CO,

  Check this forum under solved download Lela Here, there is a posted URL.

  It has the possibility of 64-bit, that you can select.  This give a try.

  Good luck!

• HP Pavilion dv7 - 3188cl: I single core or dual core processor?

  Hello

  I have a processor intel I5. Can I have a single core to a dual core? Any help is greatly appreciated. Thanks in advance.

  Hello

  It is a dual core processor - see link below.

  http://Ark.Intel.com/products/43537/Intel-Core-i5-430M-processor-3M-cache-2_26-GHz

  Kind regards

  DP - K

• My Pentium Dual-Core E5200 showing as Single

  Good to start with my computer information-

  Windows XP
  Home Edition
  Version 2002
  Service Pack 3

  I have a Pentium (r) Dual-Core E5200.

  My Device Manager shows two hearts, but my Task Manager displays only one and my computer is slow massively. I had a problem a month ago and reinstall windows. It took me a week to get installed and working properly. My bios has Multicore multiprocessing (SP?) active. My Manager to design shows my computer (Advanced Configuration and Power Interface (ACPI) PC. I have a second option for Standard PC. I also tried to find other solutions to get it working properly, but it forced me to change my boot.ini file and I have no one. Yes I did all the stuff to show all hidden files and the only one that shows is C:\WINDOWS\pss and is called boot.ini.backup. All the solutions or who need more information help get my processor works properly. I at one point had show as a dual-core in my task manager. That was before resettlement.

  Hello Stephen,

  I have taken note of the fact that you do not have a boot.ini file.

  Windows XP is able to boot without a boot as long as the boot drive is on multi (0) disk (0) rdisk (0) partition (1) \WINDOWS.

  If the machine has a floppy drive, it may be useful to create a boot diskette to try the steps mentioned in the article that you have found-in this way, you can change the boot.ini without fear of being unable to start abruptly.  You will need to create a new boot.ini file by using the following article:

  http://support.Microsoft.com/kb/289022

  You should be able to use the boot.ini file example text with a certain degree of success, there is always a certain amount of trial and error with this.

  This is being done, you can create startup disk that will allow us to experiment with the boot.ini file:

  1 format a diskette on another Windows XP computer with the same service pack.

  2 copy the NTLDR, NTDETECT.COM, and BOOT. INI files on the disk.
  These are placed in C:\ and most likely will be hidden.

  3. you can then use this diskette to a distressed boot.
  Note that you must work with the path of startup in the boot.ini file, until it works.

  Alternatively, you can create this disk of your Windows XP machine until problems arise and make it available as a "just-in-case measure.

  Let us know how it goes.

  Best regards

  Matthew_Ha

• Dual Core processor problem

  Hi, I have an Acer Aspire 5720Z computer ultralight laptop with dual core on windows Vista. By a stupid mistake, I stopped him while he was updating software, so now whenever I try to turn it on, the screen goes black and it does not start.

  As it is a dual core, I keep all of my personal information in the D drive (+ photos, docs, etc.), so my question is: if I restore the operating system, are my deleted information even if it is registered in the D drive (not C)?

  I hope you can help me! Thank you

  CR

  Hello

  Dual-core refers to the processor on the motherboard, not to your problem or your disks.

  C: and D: are two partitions on your hard drive Acer; D: as for data on an Acer Acer has a "hidden" recovery partition

  And Yes; If you restore / recover (new) factory settings, you will lose all your data, such as C: and D: are removed and reinstalled like new during the recovery operation.

  Try a system restore to before that the problem using the F8 method (put your Acer in time, NOT again by reinstalling the operating system) in Safe Mode:

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  System Restore:

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-system-restore-Guide/

  See you soon.

• DuoCore/Dual Core Processor

  Out of the box, CF Standard Edition supports 2 CPU. This Dual-Core CPU or a DuoCore has 2 central units?
  If I buy a server with 2 CPU DuoCore (4 CPUs), CF will use only 1 CPU or will it read 2 CPUs as 2 parts physically separated?
  
  Thank you!
  Chris

  I have a dual quad core and it seems to work just dandy. I remember the license agreement indicating the physical processor.

• Error during asynchronous script runing DIAdem of labview on dual core processor

  Need urgent help / advice here!

  A kernel works well... double heart generates error: error in (line: column 17,: 1): error opening object. The currently open object has no subobjects. Forgotten ObjClose?

  The main software built in labview for data acquisition and analysis generates a PDF report at the end of a test, using DIAdem. For this I use the tiara express vi in labview to generate a report of multi page, in which case I use for loop to go through an array of strings for each page. This loop has a registry change too. After each page I run a script to set a few parameters such as linear/log, start/end and line thickness using the DIAdem Connectivity Toolkit. See the script below:

  Call GraphObjOpen("2D-Axis1")
  Call GraphObjOpen ("2DXAxis8_1")
  D2AxisXDivMode = 'linear '.
  D2AxisXScaleType = "start/end of manual.
  D2AxisXBegin = 20
  D2AxisXEnd = 20000
  Call GraphObjClose ("2DXAxis8_1")

  Call GraphObjOpen ("2DYAxis8_1")
  D2AxisYDivMode = 'linear '.
  D2AxisYScaleType = "full automatic".
  D2AxisYBegin = 0
  D2AxisYEnd = 0
  Call GraphObjClose ("2DYAxis8_1")

  C = 1 to CurveNoMax
  If D2CurveObj (c) = "" then exit for ' c
  Call GraphObjOpen (D2CurveObj (c))
  D2CurveLineWidth = 0.75
  Call GraphObjClose (D2CurveObj (c))
  NEXT ' c

  Call GraphObjClose("2D-Axis1")

  There is also a screenshot of the vi: (script file is generated by the Dscript vi and saved on a disk. then the path is passed to the tiara script vi.)

  

  I think it is, after the first page of the report is complete to the second page tiara ALWAYS shows error as shown above. However, on my P4 laptop with single core (without hyperthreading) its works very WELL EVERY TIME with a given number of channels/pages of the report.

  My chain of thought is the ultra-fast dual core is something in parallel, so no waiting for page previous complete or complete his purpose of closing! However, in my loop for, I use a shift as before named register, certainly this kind of loop can be divided on multiple threads of carrots/parallel? because it must wait for the answer from the previous. ! ? ! ? Im running LV 8.6 on WinXP for this project and I don't even think treatment multicore for loops for is included in this version.

  The other thing is... This script allows to launch at the end on the dual core until I added the last part that uses a loop for to get all the lines of the chart to be the thinkness I need. What this loop for the guilty? Can I stop to run on multiple cores/threads? I read a post by saying that there is tiara 8 support multi core. This triggered my doubt

  As always, your comments are most appreciated

  AL

  Hi Al,.

  I have a theory, but only you can test.  In your screenshot of the VI, you have the Boolean value of entry for the tiara run with asynchronous Script.vi = TRUE.  My theory is that if you modify this boolean (and all others like him) asynchrous = FALSE, the error will not occur on the multicore computer.  The other thing you could try would be to consolidate all orders report that relate to a REPORT page in a single call to tiara ActiveX.  In the screenshot below, you have at least 2 distinct call of screw DIAdem, so it's at least 2 separate ActiveX calls for a REPORT sheet.

  Here's what I think is happening.  On a multi-core computer, there is the potential for different orders of LV ActiveX tiara to run on different hearts, which can lead to a problem of synchronization on the side of the tiara.  DIAdem 11.x and earlier works exclusively on 1 CPU, so incoming ActiveX controls should be properly sequenced by the tiara ActiveX task list.  Theoretically, tiara must serialize all incoming ActiveX controls (no matter which CPU processed them) in the order that they arrived at the Server ActiveX DIAdem.  The side sending, the execution of LabVIEW data flow should theoretically ensure that all ActiveX applications are sent in the correct order.  But it is theoretically possible that queue processing ActiveX of the operating system cannot send all the ActiveX controls to DIAdem in order that he receive them LabVIEW - IF YOU have SELECTED PROCESSING ASYNCHRONOUS.

  See if these clues help you,

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments