Presario SR1400IL: need clarification in the motherboard for windows 7 Home basic system installation

Similar Questions

• Need help to buy the activation Code for Windows Vista Home Basic Edition

  Hi I am looking to buy a new Activation Code for Windows Vista Edition family Basic can help you

  Original title: activaction Code for Windows Vista Home Basic

  Hello

  See the article to get a new Windows product key:

  Get a new Windows product key

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-a-new-Windows-product-key

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us;selectassist&target=assistance&SD=GN

  If you need assistance more support article about activation:
  Support for the Microsoft Product Activation issues
  http://support.Microsoft.com/GP/cu_sc_prodact_master

  See also:

  Activating Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  I hope this helps.

• I have the product key for windows vista home basic 32-bit service pack 2 but no cd, please help me

  I have a right problem, my computer laptop need to format I have product key for windows vista home basic 32 bit service pack 2 but no cd, please help me

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Please send me the link for Windows 7 Home premium (32-Bit) iso file (no SP 1 or other)?

  I have the key for Windows 7 Home premium that came preinstalled on my laptop. Due to software problem I want to fresh install on my laptop. Now, I don't have a installation disc. I need installation CD no SP 1 or so?

  Configuration of the laptop: HP pavilion dv4-2103tu

  Please help me.

  What is the difference, if it has Service Pack 1? In fact, you must agree with SP1 from RTM images are no longer supported.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• I have a serial number valid for windows Vista Home Basic, but my hard drive crashed and I have no way to re - install vista on my computer. I am looking for a download so I can do it.

  Basically, I installed windows 2000 on my machine and I can't find a download for windows vista home basic that doesn't have some kind of crack or keygen. I want a legal copy not a hack. I have the serial number supplied with my computer. where can I find this download or get a drive.

  Here are all LEGAL for Vista:

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• deteriorate for windows 7 Home Basic

  Hello, I had to download and re-install windows 7 on my laptop, but by mistake, I downloaded and installed windows 7 Edition home premium instead of windows 7 Home Basic, and I have the key to the base, and his is not eligible, is it possible to degrade for windows 7 Home Basic without having to download and reinstall the base one? If Yes can u provide links please, if not, you can provide the download link of windows 7 Home Basic.

  Oh and they key which is posted on the back of the laptop should work, right?

  thnx

  For a DVD that contains all the flavors of 32-bit and a DVD that contains all the flavors of 64-bit Windows 7: Starter, Home Basic, Home Premium, Professional and Ultimate see here.

• you make windows media center for windows Vista Home Basic?

  you make windows media center for windows Vista Home Basic?

  you make windows media center for windows Vista Home Basic?

  isn't fear. Ron

• There's no need to change the settings for windows update on RT

  Hello

  I can't find the option to change the settings for Windows Update on Surface with Win RT.

  I searched through the forums and answers, but on the left side of windows update, there is no option to change the settings on my surface.

  My windows update is configured to "Automatically install updates" and I can't change it.

  Thanks in advance for your help.

  Milan

  Configure your WiFi connection as connection meter and then check the settings of the meter connections - it allows to disable some updates and other actions which are data, unless you run them manually.

  Read this: http://windows.microsoft.com/en-GB/windows-8/metered-internet-connections-frequently-asked-questions

• Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

  How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

  Hello

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Bootmgr missing of error for windows 7 Home Basic

  Salvation;

  I want to restore my laptop to factory setting, because all network drivers are currupted and couldn't fix the laoptop. but I tried to restore to factory setting I'm missing bootmgr error fascing... .i have no any CD bootable...

  Here are the details of my laptop:

  Operating system: Windows 7 Home Basic

  Model laptop: HP pavilion dv6 notebook PC

  The system board ID: 1658

  Processor type: Intel Core i5 - 2430M CPU @2. 40 GHZ

  any help will be appreciated

  concerning

  khalid Khan

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Please indicate if the system recovery ran and finished or you were unable still to start the recovery. Depending on the exact cause, you may be able to fix the "bootmgr missing" error using a Windows 7 installation DVD. If you need a disc to Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If you created this disk, you can boot from it and select 'Repair' to try to solve the current problem.

  Select repair your computer. After several screens, you will come to choice. Select command prompt. Type bootrec /RebuildBcd.  Then type Exit

   

  Select "Startup Repair" and let it run. Reboot the laptop.

   

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Snipping Tool for Windows 7 Home Basic 64-bit

  Hai

  Depending on the topic, I use Win 7 64 bit, which is Snipping Tool.

  If anyone knows how to turn on or download from Microsoft of property to provide the procedure.

  As I tried to search this tool to "Turn Windows features on or off".

  but I do not find Option or 'Tablet PC components optional', I can get this tool.

  That's why I need your support for download/activate this tool.

  Hi Mohammed,.

  You say you have window 7 Home Basic.

  According to this site: http://windows.microsoft.com/en-us/windows7/products/features/snipping-tool

  "Snipping Tool is available only in the Home Premium, professional, full and business Windows 7 editions."

  I suggest that you use your favorite search engine and look for free alternatives.

  See you soon,.

  Julia

• The upgrade problem - Windows 7 Home Basic to Windows 7 Home Premium

  I just bought today (10 August 2013) button upgrade to Windows 7 Home Basic Windows 7 Home Premium in Mumbai, India a supplier deemed authorized (Croma). When I tried to update using Windows Anytime update, I get a message that the key is a version of Windows that does not work for Windows Anytime Upgrade. Packing of the key says that its for use in India and I am based in India. What can be the reason?. -Joshi kazadi

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Minimum requirements for Windows Vista Home Premium - download & installation

  I need to install Adobe Acrobat X Pro for windows on my laptop and my operating system is Windows Vista Home Premium but I can not because the system tells me that I can't due to not meeting minimum requirements. What can I do to upgrade my system so that the program can be executed and be installed thanks?

  Acrobat X Pro system requirements

  Windows

  • 1.3 GHz or faster processor
  • Microsoft Windows XP Home Edition, professional, or Tablet-PC Edition with Service Pack 3 (32 bit) or Service Pack 2 (64-bit); Windows Server 2003 (32-bit and 64-bit; (Service Pack 2 required for 64-bit); Windows Server 2008 or 2008 R2 (32-bit and 64-bit); Windows Vista® Home Basic, Home Premium, Business, Ultimate, or enterprise with Service Pack 2 (32-bit and 64-bit); Windows 7 Starter, Home Premium, professional, Ultimate or Enterprise (32-bit and 64-bit)
  • 512 MB RAM (1 GB recommended)
  • 1.9 GB of available disk space
  • screen resolution of 1024 x 576
  • DVD-ROM drive
  • Microsoft Internet Explorer 7 or 8; Firefox 3.5 or 3.6
  • Video hardware acceleration (optional)

  Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

• E_FAIL (0x80004005), the SP2 of Windows Vista Home Basic

  It is not possible to install SP2 windows Vista Home Basic.

  Error Msg: E_FAIL (0x80004005)

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner