Presario SR1463CL with drivers problems

Please be tolerant of beginners.

I purchased a SR1463CL to add to a DELL Dimension - old but never fails. -the HARD drive was crushed. I replaced the HDD Samsung with Western Digital. I have replace the dial-up modem. All this without problems. I installed Windows XP Pro and SP2 update. My system detects "New hardware" drivers VGA Compatible and multimedia controller. I have had no success finding the right drivers and their installation. My monitor works find, but I have no sound.

Poster 'sounds, video controllers' Device Manager with the problems. Initial device showed sound and audio by default to the Modem. I removed which and at this point no device is indicated.

Device Manager shows no driver found for new hardware and online search has failed. Windows Update detects any is available. I checked on the resource one manufacturing line have failed in my downloadsfrom RealTek and Nvidia.Dial - up has had major periods and material has been identified as there's no way for the system. Previous owner had made the back-ups-DVD-but they went "purple haze" and could not be read. That's why I installed XP Pro.

My modem does not work on and additional time. It will connect and funtion but after a few minutes I'll get "Page not found" displayed.

So, I use my Dell Dimension for internet troubleshooting. Any help is greatly appreciated.

Respectfully.

"Submariners do it deeper."

Thanks for the information. Due to serious conflicts resulting from auto-updates from microsoft, which I had to reformat the HARD drive and have located since the necessary drivers to the www.sis.com for VGA and www.realtek.com for audio AC 97 readers to be precise. Manually review and choose downloads in the future.

"Greens, all councils prepare to dive."

Thanks again for your help. It is greatly appreciated.

Bamabubblehead went to the abyss.

Tags: HP Desktops

Similar Questions

  • Pavilion dv6 6130ew: resolution with drivers problem

    Hello. I had the problem after reinstallation of the system. I can't change the resolution higher than 1024 x 768. I tried the drivers from the site

    http://support.HP.com/pl-PL/drivers/selfservice/HP-Pavilion-DV6-6100-entertainment-notebook-PC-serie...

    All else fails... and last I can't download yet. I can't double-screen HDTV without a driver. It's irritaiting. Can someone help me to solve my problem?

    Hello:

    According to the specifications of product for your laptop, this should be the correct graphics driver you need that installs the switchable graphics drivers the Intel and AMD...

    This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp55092.exe

  • HP notebook 15ac-118TU: problem with drivers

    Recently, I bought a laptop HP 15ac-118TU (October 26, 2015). I was faced with many problems to do this job - machine

    1. After the end of the driver installation procedure, no message appears confirming the installation of this driver. Is it possible to check if a specific driver has been installed or not?
    2. The possibility to change the brightness (keys F2 and F3) does not.
    3. Battery drains quickly (works for 2 hours only).
    4. The laptop works too slowly (not provided with pentium dual core processor 5th generation).

    If anyone has solutions to these problems with this model, please help

    @HarshM,

    Hello and thanks for posting back.  If you bought a system with free back, you can check to see if the support site offers drivers for the operating system installed.  If not, you will need to find the drivers on the internet.

    All compatible drivers can be found on this link.  If you can't find what you are looking for be sure to first install the chipset driver.

    Drivers and software for computer laptop-15 ac118tu - HP

    Please let me know how things are going.  Thanks again and have a great day.

  • Problems with drivers for laptop HP650

    Hello

    I have a problem with drivers for this model.
    I have installed windows 7 32 bit, then removed all the drivers from the official website of HP, but a problem with the two drivers, PCI SIMPLE COMMUNICATIONS CONTROLLER and CONTROLLER ASSISTED, now I can't connect to Internet, LAN or wireless internet.

    Is there a solution?

    Hello:

    This is the driver you need for the PCI SCC.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5225011&prodNameId=5225013&swEnvOID=4062&swLang=13&mode=2&taskId=135&swItem=ob-104656-1

    In order to find the right driver for the wireless card (since there may be one of several different model wireless cards in your notebook), go to Device Manager and click on the network controller needing drivers and display the material for her ID.

    If you don't know how to find the hardware ID, please read the info on the link below:

    http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

  • Fromm Vista Home Premium (with many problems) I wish back to XP PRO. Where can I find the drivers? I think that the original XP disk contains the drivers.

    Vista Home Premium (with many problems), I wish to go back to XP PRO. Where can I find the drivers? I do not think that the original XP disc also contains the drivers!

    Some computers come with a disk drivers or Drivers and Utilities .  If yours does not, look for drivers on the web site of the manufacturer of the computer.

  • Problems with drivers in Lite Touch Deployment (WinPE 6.2.9200, deploying 7 x 64 ENT)

    I'm trying to deploy Windows 7 x 64 enterprise on a laptop that is not our standard specification and ordered as only once without prior testing.

    When I have PXE boot since our deployment server, it loads boot.sdi and the trunk. WIM successfully, but I get so a mistake a network device was not a driver loaded for WinPE could not connect to the deployment server.

    Try to resolve what I have:
    > Download the appropriate Windows 8 LAN driver from the manufacturer's website
    > Imported it out-of-box drivers in MDT
    > Checked in the properties of the driver that the seller and the device listed in the error ID appear in the list of supported devices
    > Updated the deployment share
    > Imported the updated boot image to WDS
    This could not solve the problem, so I tried importing the driver directly in WDS and adding to the image manually boot. It has also failed to solve. After I installed Windows 7 manually on a disc, I have successfully installed the same driver to activate the LAN, although it is listed as a Windows 8 / 8.1 driver by the manufacturer. For me, this means that the driver is valid but I somehow do not import into the Lite Touch boot image. What can I do to make the driver to load properly?

    You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  • two drivers of PXI chassis with Configuration problem

    Hello

    I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

    1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

    2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

    Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

    So I made several tests as below:

    1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

    2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

    Please, any suggestion is highly appreciated.

    Sincerely,

    Bin

    Hi Ben,

    This happens sometimes with MXI-Express:

    Error code 12 with MXI-Express

    http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

    In general, you can read this error 12 means on Device Manager:

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

  • Questions of Compaq Presario CQ60 with restore settings factory, sticked on a blue screen (BSOD, no)

    Hello, I have to get my usual laptop fixed, so I decided to get out of my Presario CQ60, which I have not used in 4-5 years. The operating system is Windows Vista Basic and I want to perform a restore factory settings (I don't mind losing the data on it) and upgrade to Windows 7 Home Premium. So far I tried to do a restore to factory settings by pressing F11 several times to start, and I get to a screen that says "Windows loading files", which leads to a black screen. After what seems like a long time, a blue screen appears where I have control of my cursor (not the Blue Screen of Death) and nothing has changed since. I will update with any changes, because things seem to happen after letting it go for a while, but for now any suggestions on what to do? Let me know if I've left out any information. Thank you!

    Hello

    We can not help you with this problem of factory settings.

    Press F11 at STARTUP is the method that HP plans to use.

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00809678#n405

    1. Turn off the computer if it is not already turned off.
    2. Disconnect any external devices such as printers, USB drives and memory cards.
    3. Turn on the computer and immediately press the F11 key several times , about once a second, until the Recovery Manager opens.
    4. In the Recovery Manager welcome screen, click Next .
    5. On the Microsoft System Restore screen, select No , and then click Next .
    6. On the System Recovery screen, select Yes , and then click Next to continue the recovery process.

    etc.

    And that is the recovery Partition and the process which they installed during the manufacturing process, not Microsoft HP

    You will need to contact HP or ask questions in the forums to Support HP about this problem.

    http://h30434.www3.HP.com/

    @@@@@@@@@@@@@@@@@@@@@@@@

    And I don't think that it will be suitable for the upgrade to Windows 7 Home Premium as being Vista Basic, the material it will not suitable or sufficient to run Windows 7 properly and I have no idea if HP even wrote Windows 7 drivers for it.

    Before you buy Windows 7 after Vista fixed:

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    See you soon.

  • Satellite Pro L300-PSLBDE (Windows 7 drivers & problems)

    Hello

    I just installed Windows 7 on the laptop, when I checked the drivers download page I couldn't find Windows 7 drivers, although all other submodels in the L300 (PSLB9E-PSLBHE/PSLB1E) Branch have Windows 7 drivers listed for version 32 & 64, so what gives?

    I need especially the driver webcam, Windows 7 almost everything automatically identified except that I don't mind a pilot wireless network adapt (realtech) given that the Wireless does not work / connect anything I don't try, no idea why.

    I download the driver for the Cam for a different model and test on the lappy if it works so very well, and I hope someone can help me with the problem also wireless.

    Hello

    I think that the Toshiba is under driver version. This means that every day more and more drivers are published
    Maybe you should just wait until the drivers would be released

    On the other hand, you can try some drivers released for other series from Toshiba that some unique drivers should work because the pieces of equipment are not really different

    PS: Here you can find the Wlan driver:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

  • Compaq Presario CQ56 - :(wireless Internet problem

    Hey everybody,

    So I just joined here to see if anyone can help with my problem, because frankly, I'm out of options now about two weeks asking friends and colleagues and searching the Internet for answers to similar problems. I tried twice with the information I found on this site for quite some time and it does not work for me!

    In any case, I have a HP Compaq Presario CQ56 laptop. It has been implemented correctly when I bought it, everything worked perfectly. I managed to catch a virus that prevented me from even turn on my computer (which is strange, because I'm not a fool with computers, and I know what not to do/download sites to visit), so I had to restart my computer to stock, I used my Windows 7 disc, partitions formatted and installed windows again.

    Now, for some reason it doesn't connects wireless Internet. It connects when I have an ethernet cable connected, but it is not all networks, as shown in this screenshot:

    (And also here's a cute Bunny for your pleasure)

    So you see my problem it is very frustrating. I don't know what is the cause, but I guess it must be a driver problem? Which is why I write here, if this is indeed in the wrong section, please accept my apologies.

    Here is an another screenshots that can help, just in case:

    If someone could shed some light on the problem for me, or even to resolve, I'd be very grateful it is extremely annoying. As I said, it works fine when I have my laptop connected to the internet, when I'm in College, but when I come on a weekend, I can't put my laptop, because I only WiFi at home.

    Thanks for reading

    Hayley R

    You are the very welcome, Hayley.

    The problem is that the needs of the wireless (network controller) one adapter driver installed and here is the link for the driver you need.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

    Once you install the driver above, the wireless should work just fine.

    Best regards

    Paul

  • HP compaq Presario C783TU: Audio drivers for HP compaq Presario C783TU XP SP3.

    Hey guys,.

    I bought my Presario C783 long.

    I got one operating system other than XP, but after a while I found that he had become slow and so I went down to XP.

    I have simple demoted by download Windows XP SP3 cd and in making a USB flash drive and following the installation of Windows.

    After installing everything works fine but just sound does not come also I don't see any option on the taskbar volume control.

    I typed mmsys.cpl in run and tried to place the volume in my taskbar icon, but whatever it is empty and IT SHOWS NO READING DEVCES, DEVICES of REGISTRATION NO.

    If I suspect it has something to do with drivers.

    Please help me guys.

    Thanks in advance.

    Hello:

    First, install this driver and restart.

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_73340_1

    Then run the below driver Vista and if he does not get the sound for auto work, try to manually install the driver by navigating to the specific audio driver in the folder of the driver that is located in C:\SWSetup\sp40762.

    File name: sp40762.exe

  • I bought a Compaq Presario V3000 with Vista. I want to switch to XP. How can I downgrade?

    I bought a Compaq Presario V3000 with Vista. I want to switch to XP. I want to know the next steps.

    original title: Vista to XP switch

    You need to find (good luck) a copy of Windows XP to purchase.
    You should make sure that your computer is compatible with XP, and that the manufacturer has all the necessary drivers.

  • I have a mess of error. about microsoft Isatap adapter... plug and play id root\ * Isatap\0002 error tv-configmgrerr31 need help with drivers

    need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you

    Hello

    (1) what is the complete error message you receive?

    (2) when exactly you get this error message?

    (3) how long have you been faced with this problem?

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    See the article below

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520

  • I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

    I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

    The primary partition has the following folders (including hidden & system)

    The recovery partition has the following (including the language files more)

    Someone at - it ideas why my laptop does not work?

    Thank you

    Greg

    Hello

    You press F11 on startup with a HP Compaq to start the recovery process.

    For problems with the recovery process, you will need to contact HP.

    BIOS problems:

    There are messages for the HP Forums for posters with similar errors:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

    All the answers it point to a drive about to fail

    See you soon.

  • can anyone help with drivers for invetel/coshiba 3887 rev0 vista

    can anyone help with drivers vista for invetel/coshiba 3887 rev0 54g wifi
    I looked everywhere goot virus and God knows what. Lucy was protected.

    Hello

    Method 1:

    I suggest you to see link and check.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

    Method 2:

    I suggest to download and install the Microsoft safety scanner and run the scan and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

    I also suggest you contact the manufacture of the product and check.

Maybe you are looking for

  • Under settings > how to remove the storage data

    I went into settings > storage & use iCloud and I want to know how to delete data. For example in my mail application my iPad tells me that there are 796 MB. I emptied my Inbox, trash and sent the messages. Why is there so much use? In iMovie, I show

  • Why the links on my home page not work in Firefox 29

    After having downloaded 29 FF, hyperlinks on the home page of my provider don't work. If I try to select them, I get a little window indicating that the browser is not supported. 28 FF worked very well. What has gone wrong?

  • downloads window empty

    I installed and then uninstalled a program called classicshellsetup that converts win7 start xp features type of starting. I rebooted. Then my tools/downloads window that was busy was now empty. If I download a file it is OK, but the previous history

  • Closing open applications?

    I note that appear when you double-click the Home button applications that are open.  Them is rather than having to hit on any fly by each of them individually to fill a quick way to close them all? Thank you.

  • How to scan on PC of Photosmart B110

    Can't scan anything from the printer to the PC. PC is a HP