Presario SR5310F SATA

Similar Questions

• Replace the Panel of e/s on Presario SR5310F

  I have a desktop Presario SR5310F of a handicapped with a panel of IO before damaged friend.  There was a USB unit plugged into the front panel and the cord was tripped and pulled on the hard side.  Both USB ports are damaged and headphones and speaker inputs are also (on the same panel).

  HP part number is 5070-2909.  HP parts store has listed online, but it is not available on order.  (I checked with 'resellers' HP recommends for the part but can't find it.)  I called the HP parts store and they told me they could find a product that is 'comparable' to me, but then I went to a foreign expert who said that he was unable to understand what I wanted to order.  I guess the HP part number, part name HP, model of computer, s/n (3 times), was much too much information.

  There are rear USB ports, and I can route an extension to the front for him, but I would like to replace the Panel if possible.  A search of this part product on the internet, ebay, etc does not work.  Thanks for any help.

  Google: 2 minutes

  $26 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180630249876&hlp=false&rvr_id=216889641277&crlp=1_263602_304652&UA=WVI8&GUID=922302ea12e0a02697e779a7fff7d85b&itemid=180630249876&ff4=263602_304652

  $40 http://www.sparepartswarehouse.com/Compaq, Computer, share, 50702909.aspx must specify or call

  varied http://www.google.com/products/catalog?hl=en&sugexp=gsisc&xhr=t&q=5070-2909&cp=0&bav=on.2, or & wrapid = tljp129980559351700 & um = 1 & ie = UTF - 8 & cid = 3959108179159633093 & a = X & ei = m3V5TeCBD4SKlwfc4InrBQ & sqi = 2 & ved = 0CCUQ8wIwAg#.

• Support for Compaq SR5310F CPU

  I have a Compaq SR5310F desktop computer with a 2160 cpu c2d.  When I checked that the specifications for the cpu upgrade for this machine, I was advised he could accept a Pentium D 9xx and 960 was the highest.  When I got the Pentium D 960 and installed the computer reported it was not supported.  When I look in the CMOS, it is visible, but when I try to use the computer with the installed processor it just turned off.  There is a bios update for this machine or can I just have bad information of HP?

  This is the original factory specifications for the desktop Compaq Presario SR5310F. According to the specification, this model came with an Intel Pentium E2140 to the factory. Also, the specifications indicate that the following processors are supported;

  Type of socket: 775

  Core 2 Duo E4x00 with Dual Core (Conroe) until E4400 technology

  Pentium E2000 series (Conroe) until E2160

  Pentium D 9xx Dual Core (Presler) powered up to 960

  Pentium 4 series of 6 x 1 (Cedar Mill) up to 661

  Series Celeron 4xx up to 440

  Celeron D 3xx series (Cedar Mill) up to 365

  Celeron D 3xx series (Prescott) to 355

  The Core 2 Duo E4000 series is the best, while the series Celeron D300 is the worst CPU supported.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Simple question == PCI x 16 vs PCI x 16 "2.0".

  Hi I have a Presario SR5310F I want to upgrade with a video card.  I want to really just to speed up my system and maybe play more than a few games.  When I went to my usual provider (newegg) I noticed that there are many more PCI x 16 2.0 cards available.  Do you know if they are compatible?  I just got this computer less than a year ago, why spend the x 16 to 2.0 so soon?  Oh, one more question, I checked my diet last night and I have a 250 watt power supply.  What kind of card I could get without the upgrade that.  All advise you could give would be appreciated.

  2.0 cards are backward compatible.  Best deal is now the 9600GSO with GPU 92.  It costs $50 after rebate.  This card can easily to 600-650 MHz overclock.  It also comes with HDTV out.

  The stock of power supply should redouble efforts to drive the GPU (more noise).  You can also switch to a quality 400W PSU $30.

  http://shop1.frys.com/product/5837943

  http://www.Newegg.com/product/product.aspx?item=N82E16817139008&CMP=AFC-C8Junction

  extra 20% on w / coupon «Mar20»

• driver sata Presario C304nr

  My Presario laptop had a hard drive crash and I can't find the recovery disks.  I tried to install Xp but it tells me that it cannot find the hard drive.  I was told I need the original disks because it contains the SATA driver need to install XP again.  I bought a 250 GB Western digital hard drive to replace the HP drive dead.  any help on this computer setting

  @pmartinez92126

  Hello

  You will need driver slipstream SATA ( ICH7M/MDH of Intel SATA AHCI Controller ).

  All the information in this topic, you will find in the part B of the link below:

  Drivers SATA for XP (solution on BSOD 0x0000007B)

• Presario C304TU does support SATA HD & Win7?

  Presario C300
  P / N:RE027PA #AB0
  Service C304TU

  This laptop has been owned by an old lady who used it rarely.
  I bought a second hand.

  It's like a new product.

  A few things I would change:
  1. its original HD is a 60 G IDE.  The Commission supports a 120G SATA HD?   "SATA Native Support" States in the BIOS.
  2. its origin OS is XP.   And it supports Vista, says in its specifications.   Support Win7?

  Thank you.
  Vickyal

  Windows 7 Starter is not recommended. Put in 32-bit Windows 7 with SP1 as suggested Serginho. Starter has no Aero desktop and is devoid of many features. Windows 7 will work actually quite well on the 2 GB of RAM. Better than Vista did.

• Compaq Presario SR1214NX desktop PC: update BIOS for SATA HDD?

  Hi CV Experts.

  In 2004, I bought a HP Compaq Presario SR1214NX desktop PC. Now, leave the original hard drive and I bought a new Seagate 500 GB SATA hard drive. I thought that this would work because the PC MoBo has two SATA connectors. After installation, I noticed the drive is not detected. I checked the BIOS but not hard listed. The installed BIOS is "BIOS Award BIOS Core Version 6.0 revision 3.10 26/07/2004.» What can I do? Is there a BIOS update available?

  Help, please!

  

  Do more research on this issue, I think that this motherboard may not have native support SATA. You can use ports SATA via Windows after you have installed the necessary drivers. I suggest that you add a primary as hard drive IDE PATA drive and load Windows. Post windows installation, install the necessary SATA drivers and plug the secondary drive SATA for use as a hard disk.

  I'm sorry for all of the early confused communications.

• Presario c304nr does not recognize sata HP

  I repartitioned & sata HD format several times for my presario c304nr, it will not recognize the HD so I can't loa WinXP.
  Because the original HD is gone, there is no OS. Whay is the precedure support Windows XP in this laptop?

  poldracker

  Well it is almost a lost art now, but you will need to load the SATA (ich7) driver during XP Setup using the F6 method. A usb floppy drive is useful or you can actually do a XP CD personalized with drivers 'slipstreamed' in the contents of the disc by using a program called nLite.

  http://www.nliteos.com/

  Google Intel SATA F6 drivers and nLite XP CD and you will find the info you need. Good luck.

• Compaq presario cq60-212us: which SATA revision is supported?

  Hello. I'm looking to upgrade my hard drive and weighing various options. I need to know the data transfer speed of the Compaq Presario CQ60-212US limits and who review SATA, it supports. Any help would be greatly appreciated.

  The manual says it's mcp77. The mcp78 can be configured with DDR2 or DDR3, but the slot dictates how memory can be installed and yours is DDR2. On Sisoft go to physical discs/transfer Modes and active transfer Modes Support and providing information on the controller.

• HP Presario C061-220SA. Which hard drive - SATA or IDE?

  Hi guys

  HP Presario C061-220SA my daughter is dead and of course, to be a university student, she has all of her work there and no backups!

  So, now I have the laptop and BIOS utilities, checking the material, it was stated the hard drive had to be replaced.

  I'm guessing it's a disc hard 2.5 "but I'm not sure if it is not an IDE or SATA - can anyone help?

  I need to get this fixed fast and replace the drive, maybe I'll be able to recover some of its data when I chase him and connected through a USB enclosure.

  See you soon

  John

  Presario CQ61-220SA has a 2.5 Sata drive.

• Add SATA on Presario SR1500NX

  Hello

  Can I add SATA on desktop PC Compaq Presario SR1500NX?

  The Presario SR1500NX a standard IDE hard drive.  Is there such a think as an expansion card PCI SATA, which will allow the addition of a SATA drive as a 2nd backup drive?

  Thank you very much for New Orleans.

  Thank you ~ enjoy the rest of your crawfish Cajun

  No need for that. Your motherboard has 2 sata connectors. Lower right of the governing body in this photo.

  http://support.HP.com/us-en/document/c00069442

• Looking for Compaq Presario C500 series driver SATA

  I have a Compaq Presario C551TU (C500 series).

  Mobile Intel (r) 945GM/GMS/940GML Express Chipset or Intel(r) 945GT Express Chipset

  (result of the Intel chipset identification utility)

  Memory controller:

  82945gm/GMS/82940GML or 82945GT

  I/o Controller:

  Intel(r) i/o controller 82801GBM (ICH7M)

  And I have a drive hard Hitachi HTS541680J9SA00-support SATA.

  I'm looking for SATA controller for this

  Thank you.

  If you have had success with witout XP SATA driver installation, there is no need to worry about this. Do not install Intel Chipset_that is the motherboard drivers.

• SATA drive in older presario

  installed 500 GB sata drive in presario sr1265cl with card mother a7vbx - la.

  unrecognized disk, sata port is active on this system?

  do I need a new bios or anything just not compatible?

  I just checked the configuration BIOS F11 on my old Pavilion.On Advanced tab screens, all the way at the bottom of the screen is "Ide Configuration". Go in, and there is the possibility to change the controller P - ATA only P - ATA & S - ATA or SATA same only. Remember that I have not tried a SATA hard drive with these settings so untested Betacam, but he seen possible.

  Be careful with the S - ATA definition only because this will also affect CD/DVD drive.

  If changing the settings does still not work, idea of Hüffer PCI card would be my next choice. Thanks for reminding me of that!

• Presario 8000T with 2 SATA and Raid

  I had a hard drive go bad today and I want to replace the 80 G SATA (computer bought in 2004).

  I don't need really for the RAID feature and would like to just run 1 car (a new) and disconnect the 2nd.  I have an external hard drive that I use for backups.

  Question: Is it making too easy that disconnecting SATA # 2 (not use) and install the new SATA drive and install Windows XP Pro top?  I'll be off and running at this time there, or are there unexpected conflicts, you know?

  Question 2: If there are conflicts in the above statement I can just be best to install a new disk, use the original restore disks (XP Home) and keep the RAID?

  Please notify.

  Thank you

  Ethics

  ERICO,

  The system is P8656T #ABA.

  Yesterday as a test, I disconnected the low-level SATA disk and did a full recovery of the use of disks in the system.  A few mistakes RAID as planned, but some of the same things 'strange' occurred as before:

  (1) after connecting a drive hard external via USB in the front, the computer would recognize in my computer, then not, he would then not, as was the case a noise unique bell was noticeable again and again - very flakey.

  (2) system has been very slow execution of orders, close open windows

  (3) system would block

  (4) system would take 3-4 partial boots that I order for a start to the top completely.

  (5) computer at night: at initial start-up, she stopped and said a file was missing and hung, then Ihit and he continued the boot.

  I am currently NOW only test each other hard drive only, full recovery successfully and currently testing operations:

  (1) same problem with USB and external hard drive (ext drive works perfectly when connected to my laptop USB)

  Continue...

  It reminds you something in your experience? (ie. power supply possible problem maybe)

  Check if you can unplug it RAID.

  Thank you

  Etics05

• My Compaq Presario SR2150NX supports a 1 TB SATA HDD?

  My 120 GB SATA HD original died.  I reinstalled Windows Vista Home Basic - Home Edition 6.00.6000 with recovery disc on a 1 TB SATA hard drive.  However, when I do a scan PC Wizard on my computer, it lists the HD as a hard disk of 1 TB ATA (SATA no).  Why?  It seems to work very well, but can be fulfilling best if she runs as a SATA?

  Also, I would like to install a secondary hard drive 2 TB SATA for extra storage.  This motherboard will it take?

  It is my first time posting here. so I hope that I followed all appropriate guidelines.

  David

  Hello:

  There would be a way to install the AHCI controller now and then reboot into BIOS and change the setting to AHCI. But unfortunately, I don't know how to do this with an Intel based chipset.

  I don't know what AMD SATA AHCI controller you have, so I can't help there.

  I agree with Frank that you see much of the performance by changing the gain setting.

  However, I personally would do it only because it is preferred with a SATA setting if it is available.

  In the current mode of the IDE:

  1. your data transfer speed will be limited to the report wizard PC of UDMA Mode 6.

  However, your drive is capable of transferring data at a rate of 3.0 GB/S in AHCI mode.

  2. your drive is unable to take advantage of the Native Command Queuing, which is available in AHCI mode.

  http://en.Wikipedia.org/wiki/Native_Command_Queuing

  So, unless you have gone far in your new OS install with lots of updates, installed all of your other programs and files, etc., and it would take you hours of work again, so I firstly, change the setting from AHCI BIOS and have a go at it again.

  Paul