Press power twice to start cold

Similar Questions

• T420s no power, flashing Led power - does not start

  My 2 month old T420s refuses to boot from this morning.

  After pressing the power button, it starts flashing Alternatively the light of the power button and the LED fingerprint reader.

  Nothing else happens, no fan starts to run, or anything else.

  I have not changed anything since yesterday when it is started without any problems.

  Anyone know what this could be?

  
  

• starting cold on hp Pavilion a1737c (resolved)

  I have a problem with the hp Pavilion a1737c computer and it it cold boots for some reason, the side fan that lights is colder than usual and is also stronger as usual, when I plug the cord each time light led goes off for 1 second then turn it, this computer had a history of loading in windows as the freeze at the loading screen then restart like 30 times to get it back , but that all changed after I updated, now it has just a few problems like display disk error reading, just freeze after startup, Frost during the loading screen and also gel just after the loading screen but not fully loaded in windows vista, the last time I remember the computer will almost the last time it worked which was yesterday which must relate to boots cold because I read the forums of others has been slow and it seems apparent, I don't know exactly what causes the computer to start cold, fans will work perfectly, the hard drive is a seagate and it does not load at startup cold, there is no power of some components such as connector of the monitor and keyboard, mouse, hard drive or anything in the front without counting as the cdroms what you type on the cpu I'm not touching because I know it is amd and it is very fragile, I think it might have to do with power past in sleep mode because I had the power setting max savings in the Panel and he kept gel recently, I managed to start cold not after taking the battery out of its place and then replace for a lil While but then when it happened once again somehow it remained this way and is always like that now, I need help please someone help me to make the computer to load up again and make sure that's not cold start, please someone give me suggestions and solutions in etc etc you can because I need to fix it somehow the computer has 3 GB of ram, integrated video card no beed detector, a modem card used for phone, a seagate hard drive etc etc please send aid as soon as possible!

  This has now been resolved by me, the motherboard was at fault and I had to replace it, but now, everything else works fine, also a computer scan revealed that the cpu fan is running out of oil and that it now needs to be replaced.

• When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  Check that you have not set multiple home pages.

  You can find the homepage here:

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Firefox supports several home pages separated by ' |' symbol (pipe).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• If I want to open the Web site in a second tab and press Ctrl + T and start typing the title of the website or the URL, why Firefox 4 insists on moving to the first tab? Is it possible to disable this option?

  I regularly need to open the same Web site in two tabs, to be able to view the changes between the first and the second opening tabs. In Firefox 3.x I could press Ctrl + T and start typing the URL or Web site title, which would be part by Firefox. This allowed me to open quickly the same website in a second tab Firefox 4 does not, on the contrary, he wants me to switch to the existing tab. This isn't what I need.

  Of course, it is possible to open the Web site in a second tab through for example a bookmark, but it takes more time and effort. It would be great if I could select the Firefox behavior in this situation.

  If you have already opened this page in another tab and then you get a switch to tab appears in the location bar menu drop-down.

  You can watch this extension to prevent that from happening:

  • Switch to no more Tab: https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/

• ThinkPad problem power S1 Yoga starts

  I have this ultrabook 3 days. Now it used to boot. After pressing power button the power led is on for 3 seconds, then left. Some knows about what some can help me with this. Thank you!
  PS I tried all reset options, but nothing helps.

  It is resolved by replacing the motherboard

• What button / stop pressed power on display Nothig but what liberation turns off

  Hi all

  I have HP ProOne 400 all in one PC

  When I press power button / stop hard drive LED turns on but nothing shows on the screen when the power button turns off during this power LED remains on. I checked with another power adapter the same power response is quite well.

  Concerning

  Muhammad Xochitl

  I discunnect all the components attached to the motherboard and plug one by one. Now its working fine

• Not able to bring up the Google search box after pressing control twice under Mozilla Firefox.

  Original title: Google with Firefox search box.

  With a previous version of Firefox, I could bring up a Google search box after you press control twice.  This no longer works.

  Hi SandiKP,

  When you face issue in Mozilla Firefox, I recommend you contact Mozilla Firefox support for assistance.

  Hope the helps of information.

• I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD.

  Hello Comunity Microsoft :D My name is Mike and I built a gaming pc. Everything was going well for the first 3 days, but now I have a few crashes very violent. Speakers in loop and buzz and screen lock. I have to completely shut down to go back to a working state. I did everything I could possibly think of to solve this problem, but I can't.

  Then. on the problem. Today, I decided that I was able to solve all the problems by reinstalling windows. I had my keys together and put the disc in. I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD. I do and I get normal loading windows files, and at the end of this road, I get the Welcome screen in windows7 with no option and a fat slider. I don't have the little box that tells me that I can fix my computer or reinstall windows, NOTHING. I tried several times and received the same result<--(Insanity: root="" meaning...="" just="" saying)="" so="" i="" called="" windows,="" or="" had="" windows="" call="" me="" rather,="" and="" the="" tech="" says="" she's="" never="" heard="" of="" such="" a="" thing="" happening,="" and="" walked="" me="" through="" all="" these="" steps="" that="" i="" have="" already="" tried....="" still="" no="" help.="" so="" i="" am="" asking="" the="" community.="" has="" this="" ever="" happened="" to="" you="" and="" how="" did="" you="" make="" it="" work.="" and="" please="" don't="" post="" a="" list="" of="" regurgitated="" back="" log="" fix="" lists.="" rest="" assured="" i="" have="" already="" done="" it="" and="" failed="" to="" receive="" a="" different="">

  Just to isolate the problem, try to download a new copy of Windows 7, and then try again:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Regarding problems with the computer itself, try to disconnect all nonessential equipment attached to it to see if the problem persists.

  I would also try switching around components such as modules of memory to see if the problem persists.

  I would also check to make sure that all components are mounted and installed correctly.

• Hi, I bought the CC of Photoshop and Lightroom pack today, but when I press 'go button' to start, the site of laetitia goes gray... and I can't go any further... What can I do?

  Hi, I bought the CC of Photoshop and Lightroom pack today, but when I press 'go button' to start the adobe site goes gray... and I can't go any further... What can I do?

  Install the cc desktop application from there, Download Adobe Creative Cloud apps | CC free trial Adobe

  Use the desktop application to install ps and lr.

  Once your payment is processed, you should be able to see your ps and lr test convert to the non-epreuve versions.

• DV7 - 2173 CL Press power button for a long time to start.

  Hi guys,.

  I had happen for awhile now and it's starting to annoy me at the start, after that it was off for awhile I have to press and hold power for more than 5 seconds, someone at - it had happen before? or someone knows how to fix this?

  Thank you

  Fixed it by pulling the CMOS battery out and make contact between the 2 terminals... everything is good again...

• Equium L40-14i does not power up if its cold

  When I push the power button down when the machine is cold, green power light comes on for about 2 seconds, then turns off. If I give the laptop a little sweet heat for 30 seconds, the notebook starts up the first time and works perfectly until the machine is turned off. The laptop is Equium L40-14i

  Hope someone can help with this strange problem.

  Hmm laptop Equium L40 is an older model, it is possible that some parts of the motherboard (maybe electronic power) does not work as it should.

  By the way: before talking about some problems of motherboard, you should check if the laptop works properly using another job good and checked power adapter.

• Portege R930 - nothing is pressing power

  Hello

  When I press start / stop nothing happens.
  the pc does not stop. Windows 7 pro.

  Thank you

  Hello

  By power do you have means the power ON / OFF button?
  Could you please provide more details or detailed explanation?

  I suppose you want the laptop turns on and if it does not, you should check the power supply.
  Check the features of AC adapter and battery.
  What about the power indicator (LED)? Is this on?

• Press back twice to rename files?

  On my MacBook Pro (mid 2015 running 10.11.4) I have to press the return key twice when a file or folder is selected in the Finder in order to be able to change its name. The first time I press return has absolutely no effect or action. I think it is a particular behavior, I've not met in any of my other machines and I don't know how to change it. Any ideas?

  Hello, SonathD.

  It seems that you are having problems with your Finder not allowing you to rename a file or folder by using the return key after choosing, he. You are right in your expectations of the process of change of name, as shown in this Knowledge Base article:

  OS X El Capitan: rename files, folders, and disks

  You can change the default name of most of the files, folders and disks, including the internal hard drive (named Macintosh HD). If you change the name of your hard drive, it always appears with its original on a network name.

  Rename an item

  1. Select the item in a window in the Finder or on the desktop, press return. Or force click on the name of the element.

  2. Enter a new name.

     You can use numbers and most of the symbols. You cannot include a colon (:)) or start the name with a dot (.).) Some applications may not allow you to use a slash (/) in a file name.

  3. Press return.

  For further troubleshooting, you can test this behavior to another user to determine if your problem is specific to the user or the system-wide. This article provides a great tutorial on how to do:

  How to test a question in another account on your Mac.

  Before you try a different user account

  If you see unexpected behavior on your Mac to first try the following steps:

  Try to search the base knowledge of Apple for the specific symptom or an alert message you see. There could be more simple measures that you can take to solve the problem.

  Try to boot your Mac in Mode safe. Restart your computer. Hold the SHIFT key when you hear the startup sound. Release the SHIFT key when you see the Apple logo appears. Your Mac starts up in Safe Mode. Safe mode performs a check of your startup disk directory and removes data from the cache. Once your finished Mac commissioning, restart the Mac normally (without hold the SHIFT key) and see if the problem is resolved.

  Make sure your software is up-to-date. The question that you see can be addressed by installing the available updates.

  Check to see where the problem occurs. If a problem arises until you see your desktop, it is less likely that it is related to a setting or a user account. If a problem occurs with a Web site, see if the pages of other websites correctly first load. There could be a problem with the site and not your Mac.

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  If there are documents from your user account that you want to test with original, place a copy of these items in the shared folder in the users folder. Press the Option key while dragging a file in this folder to create a copy.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Try the same steps that caused the unexpected behavior to appear. For example, if you are unable to print, try printing from this user account. If you were unable to connect to the Internet, try to navigate on a website of this user account.

  If you use specific test settings depends on (for example using a specific e-mail account or an account iCloud) implemented the same test user account. For email and other parameters, you can use the Internet accounts pane in system preferences to set up these types of accounts. If your home folder files are necessary for tests, copy them into the shared folder in the users folder (/ Users/Shared). After you connect as a user test, copy these items to the same location in the test user home folder to test with.

  If a problem occurs in account only one user

  Is using the same steps in a user account test does not cause the same unexpected behavior, most likely you don't need to reinstall applications or OS X.

  • If a problem occurs only in a single application, check the documentation or Web site for instructions on troubleshooting specific preferences or the definition of the application files.
  • If you need help with a problem or a specific alert message, search the Apple support Web site for the text of the alert message you see.

  If a problem occurs in more than one user account

  If the same unexpected behavior occurs in more than one user account on your Mac, try checking for software or hardware problems.

  Once you have finished

  When you are finished testing, disconnect from the test account by choosing logout in the Apple menu. Then, connect to your original user account.

  You can Remove the account to test user created when you are finished. Make sure you're completely finished stable, and you don't need the files or settings you have created or copied there until you delete it.

  Get help

  If you need assistance with a problem software or hardware, Please contact Apple technical support. If you are working with a consultant, engineering or service provider to resolve a problem, remember to mention all the steps you have already tried and the results. Also mention the alert messages that you saw in the context of the question. You can take a screenshot of all the messages that appear to refer to it later.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• No Satellite A200-27R no response when you press power button / stop

  Hello

  Ive looked all over the internet and has spent weeks trying to understand the problem, but im at a loss.
  I recently replaced a cracked screen on my A200-27R and everything worked fine.

  A few days later, I started the new laptop and nothing has happened and has been the same since.
  The electric blue and the battery turns on but does not respond when you press the power button, not even the fan.

  I checked all the connections inside several times, checked without the battery, etc.
  I'm not sure what to try next, any ideas?

  Thank you

  Can you start cell phone if the battery is removed, with AC power only?

  You know, it's not easy to say what can be the problem.