Press the 2 buttons at the same time
Hello
I thought I was doing a game of Pinball this morning. Because the PlayBook a 4-point multitouch, is possible to detect the pressure/holding a button left flipper, a right flipper button or both flippers at the same time. How about the two buttons a fraction of the second part? QNX is a real-time operating system, but I have not found this type of control in the AIR SDK.
Harry
There should be no problem to do that, but I think you want to use the flash.ui.Multitouch API
Here's a video that shows how to do this, but you will end by edit it just follow your TouchEvents rather than MouseEvents...
Hope that helps
Tags: BlackBerry Developers
Similar Questions
-
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Marley6921 wrote:
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.
-
I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.
Should I turn off my Touch ID?
Basically my home button button and / standby works not together at the same time.
You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.
-
How can I view 2 sites at the same time (using the ms ms ctrl button to split the screen)
I can't open a second secession of ff if I can use the split screen feature offered by windows. I want to see 2 things at the same time I cannot compare etc.
Try this: https://addons.mozilla.org/en-US/firefox/addon/fox-splitter/?src=ss
Alternatively, open a second window of Firefox (Firefox button > new tab > new window or Ctrl + N), the second loading site, resize the windows side by side.
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
Satellite A65-S065 - button Power LED is blue & amber at the same time
1st off I have a S065 A65 and worked well after a replacement motherboard, my fault, he had to be replaced.
In any case, I have the power button LED is blue & amber LED light up at the same time. Anyone has any idea as to what it means, or maybe I'm going into something, I don't know what it is and it should be reset at the back. Any ideas?
Thank you
BenHello
I checked the manual of the Satellite A65 and there I can find information that the Power LED blinks orange indicating the machine is in standby mode. So for me it sounds like that your laptop is in sleep mode.
What happens if you click Start > stop and choose the closing down in the menu drop-down? Normally, the power LED button must be turned off and also the laptop is in sleep mode.
-
I lost the box on the top of the Firefox page where you type in a URL. At the same time, I have no back or forward buttons. Help please
This has happened
Just once or twice
is tonight
Use the instructions in controls, buttons and Toolbars Customize Firefox to make sure that the 'bar' is on your toolbar.
-
Can't push button and move the mouse pads at the same time hp envy 15?
Cannot press the keyboard and move my mouse at the same time, the stops of mouse moving on the screen, then after a few seconds, then thaws it and it can be moved again.
HP Envy 15-3012tx, Windows 7 64 bit, have not updated, there quite yet new at the beginning of the year
I also found this to play games almost unbearable, even if I found the source of the problem is the touchpad by using the feature called "palm detection.
How I fixed it for my computer hp envy laptop was that...
Control Panel > hardware and audio > synaptics clickpad v.1.1 > parameters > "smart sense" > click the gears of the 'line of smart sense' > the upper off wheel
-
Have a button and the image move at the same time in a floating frame
I have inserted an image into a rectangle and make it a floating frame that works Flory.
However, I want my form that I made in a button to also be in the same frame and scroll at the same time.
Is this possible?
You can have a single object within a framework of scrolling, but this object can be
a group. You need the button with the image of the Group and then paste it
in the framework.
-
Way to turn all effects video power button at the same time?
Greetings fellow forum members!
I have a small question: is there an easy way to turn off all the effects of the video to the ECW (effect controls window) and back at the same time?
Sometimes I add several effects to a clip, and I would like the original clip and the modified version. If there is a way to do what I'm missing, please let me know! If not, I'll send an EN Adobe for adding the feature "Shift-toggle all at once" for icons "fx" in ECW, given that this function works brilliantly in the timeline (to toggle all the 'exit follow', 'Sync Lock' and follow targeting both).
Thank you!
on a mac hold down Option and click the FX - turns all effects on and off
-
Change the location of several pictures at the same time?
I see how to change the location of a photo at a time. Is it possible to change the location of several pictures at the same time?
Thank you
Phil
Select the photos and info - enter the location (or any other field of the info) and it is applied to all photos
This is described in using Photos - a good place to get help with Photos
View and add information about the photos
To view or change information for the photos, you select one or more photos, and then open the information window.
- Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
- Add or change information: Change the following.
- Title: Enter a name in the title field.
- Description: In the Description field, type a caption.
- Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
- Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
- Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
- Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.
LN
-
How to measure multiple analog input at the same time.
I tried to do a VI that controls a motor with two buttons. If I press the buttons, the VI took the analog signal from the buttons and the engine is running. Each button covers the different direction - to the left and to the right.
I need to enter the two report in the VI at the same time, but I can't. If I run the VI, VI takes only a random signal. I want to know what are the problems and how to solve them. Please help me.
You must use a single task for both channels. See if that helps.
-
Questions about serial port read and write at the same time
Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.
(1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?
(2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?
In addition anyway is to move the cursor to the latest data from the indicator
(3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?
(4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?
Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.
su_a,
(1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected. At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.
(2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory. Your VI never clears the string so its cold length become very large.
Generally, you do not have an active cursor on an indicator. If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom. This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.
(3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires. Simply strike brace does not change the value and does not trigger the event. Not control need to be erased, but the value that he has to change. If you want to send the same command again, have a button send a command may be a better choice.
(4) write is a case of the event. It is not in parallel with anything. The structure of the event do not monopolize resources. The other loop will run while it waits.
The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops. Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint. Remove the local variable. Make mechanical locking when released.
Lynn
-
Question about running from two cameras at the same time with MAX
Hello
I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.
This is the step that simultaneously run two device:
1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.
2. open another MAX session, select the other port and press "enter". I got following error:
"Error 0xBFF60021".
Unable to perform request; acquisition in progress'
Sometimes, I got this error too:
"Error 0xBFF60022".
A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »
I already give enough timeout Fame to the tab settings of Acquisition.
The MAX version used is 4.5.
You have an idea on that? Makes simultaneous Imaging MAX support?
Thank you
-polarfox
Thanks for the quick response Bruce.
-
Display brightness and RGB histograms at the same time on 7 d MII
How can I display brightness and RGB histograms on the screen at the same time during playback on the 7 d MII. Page 358 of the PDF manual shows a graph of the two together under Lens/histogram information, but I've been able to display one or the other, not both.
I found the answer. It takes a combination of the Info button and the button to display the two histograms. In read mode, press the info button until the image and the histogram that is selected in the menu of the Play3 appear side-by-side, then use the multidirectional button(up/dn) to switch to the other the histogram.
-
How can I view multiple pages of the internet on my screen at the same time?
Hello
I am not very computer, please bear with me.
On my old laptop which has Windows XP, I used to be able to open and view multiple pages of the internet (by reducing the size of the pages) at the same time, now that I have Windows 7, I can't seem to open several pages on the screen at the same time. Please can someone advise me,.
Thanks for any help
Rita
Hi Rita,.
Assuming you are using Internet Explorer (IE) try this:- Open IE and go to the site that you want to display as you normally would.
- Look in the upper right, next to the red X, there is a button that looks like two boxes in front of the other - it's restore down. Click on it and your IE window should shrink.
- You can change the size of this window by pointing the mouse on the edges until it becomes double ended arrow, and then clicking on, now and making drag and drop your window screen by clicking on, hold and drag in the top bar.
- Once you have it where you want that it and the size that you want, click on FILE > new window, or press CTRL + N.
- This will open a new window of the same size on the same Web page, which you can then drag it where you want.
- Repeat until you have enough windows IE open to do what you need.
- When you are finished, right-click on the stack of icons of EI on the toolbar at the bottom and click "close all windows".
If you use Chrome, it's more or less the same. MENU > new window or CTRL + NHave fun!
Maybe you are looking for
-
Hi allI want to know what type of updates can I do in this laptopI want the hd to an SSD and I need to know the maximum amount of RAM I can spend tooI searched online and found nothing on my laptop...Thanks in advance
-
Can wher I gt the driver for the controller Xbox 360 work on vista
need help finding the driver to operate the joystick
-
Memory contents internal clip + more not viewable in Powerdesk
Hello I fully charged my internal memory 8 GB with music a couple of months. Today when I joined the Clip you want to add a song to my external card, I couldn't view the contents of my internal card at all. Indeed, Windows XP does not find my card
-
msg error code invalid os #.
tried to install a 966 dell a10 printer
-
I want to delete my account full adobe CS5 Design Premium licensed in the coming days.My questions is my old registration CS5 then full free?Can't I give my product to someone else, which record the license again with a new account Adobe later this y