Press the wrong button and now I'm in hidden mode - no screen

I hit the wrong button and now I'm in hidden mode.  The monitor will not remain and all is to be narrorated for me.

How can I fix without going through a screen? Help!

Hello

1. what happens when you restart the computer?

Step 1:

Try restarting your computer in safe mode and check if the problem persists.

If it works fine in safe mode try performing a clean boot in order to find the cause root.

Step 2:

See the article about how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135

Note: when the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

Tags: Windows

Similar Questions

  • I have pressed the wrong button and now don't have any project!

    I was working on a project and went to save him and must have clicked on 'Close', I guess because the project does not close, but the chronology is gone and so is the thing that shows me my video.

    Now I can't my video and rear mounting. Where at - it go?

    If I go into the windows tab and bring back a program and the timeline window, they are simply empty.

    Simply said 'no sequence' although I still see my ' sequence 01' in the project window, but I can't drag this sequence in the workspace, the little hand has a circle with a line through it, when I try. "

    So to clarify, I see my sequence in 'Project', but not in the "Timeline" or "Program" - who say 'no sequence' with no option for me to add my 01 sequence. It would seem that the only thing I can do with it is open in a "monitor Source' which is obviously of no help at all because I can't see my changes or anything!

    Thanks a lot for reading I don't know that's the kind of thing that will be laughing at a pro, but I can't seem to understand!

    Go to Windows/reset/workspace current workspace.

    If your calendar is still missing, double click on the sequence in the project window.

    See if that helps.

  • I used the Pencil button and now I have a button type of path instead of the regular "BOLD" T (for text boxes). I can't button "BOLD" T back instead, there is a T banked with a line.

    I used the Pencil button and now I have a button type of path instead of the regular "BOLD" T (for text boxes). I can't button "BOLD" T back instead, there is a T banked with a line.

    Opt/alt, click on the type on a path tool.

  • Press the push button and form go does not

    I have a non block tabular data type that has the following text fields with a field button named 'delete '.


    | ECO | TLIGNE | LDATE | REMOVE |



    Now we put LDATE in there, forms, TLIGNE and ECO agrees and goes to the next record.
    But if the folder already exists we can press the button remove the deletion of the existing record.

    I after statement behind the button Delete

    delete from at_rcrg where = eco: eco and ldate =: ldate;
    commit;

    but when I press this button the form go responds and never unresponsive State.
    What is the solution?

    Try this...

    delete from at_rcrg where eco=:eco and ldate=:ldate;
    commit;
    clear_block;
    

    Hope this helps

  • Press the orange antenna, and now I can't connect to my wireless router.

    Here's my question:

    There is this button next to the power button on my laptop which has a glowing orange antenna icon on it. He was always orange (which I don't mind) and never responded to any pressure that I had done in the past... In other words, until today. I was talking to a friend of mine while we were playing an MMO, and I told her how I have this little button that does nothing. They said "Must be a deception." (which, in hindsight was kinda funny) and then * boop *, I can't connect to the internet without connecting an ethernet cable.

    I have a Compaq Presario CQ50 - 210US Notebook PC and an Atheros AR5006X wireless network adapter in my laptop.

    I tried everything: of a hard reset, to a system restore (which in fact didn't even touch the wireless issue or one of my favorites in Chrome), trying to disable/enable/upgrade to update / restore my wireless card. No rollback option was available. First thing I did was to try to hold the button in the same way that I had the first time (I thought that the problem with a power button had to press on it, silly me.)

    My Solution:

    Sometimes, the solution is as simple as to be soft and pressing this button antenna for but half a second. And then, above all, be patient!

  • Changing the resolution of my screen. I have changed to the wrong setting and now I have a white screen

    On my screen, I changed the resolution and now when windows comes on, it displays the first "Windows XP" logo and then, when Windows actually opens, the screen is blank. I can't see anything to restore.

    juljil2006,

    pressing F8 immediately after your screen manufacturers and selecting 'Enable VGA' in the menu. Then I put just the resolution to 800 X 600. Then return to high resolution

    Good luck! Please rate me upward if you find my post helpful. Thank you!

  • I hit the sync button, and now all my pictures are published with the same preset! Help

    Hello

    I am really new to Lightroom. I don't know how to cancel it.

    Thank you

    The problem is the sync button in the lower right. Also the sync settings button is no longer available. They are there but unable to do anything with them. This impact on hundreds of photos. I was looking for my batch watermark and well I screwed up!

    Thanks for trying to help. I do understnd what you mean though.

  • I clicked on "View the entire page" and now cannot return to regular mode

    When I clicked on 'View full page' my menu bar in the upper part has disappeared. How can I get that back?

    Hi Sophie,.

    You can try to hit F11 or move your mouse to the upper right of the screen and click on click on the restore button when it appears.

    Hope this helps!

  • Administrator set the wrong password and now I can not connect.

    Original title: admin sign in help

    I have a funny feeling the person who assigned the administrator password typed in wrong because that what I thought was the password does not work and the only user on this computer is the administrator.  I can't get past the login screen. What should I do next?

    Hello

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    How to connect to your Windows XP-based computer if you forget your password or if your password expires

    http://support.Microsoft.com/kb/321305

  • Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

    It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

    I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

    If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

    Thanks for your help.

    Damicon999 wrote:

    Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

    no chime, black screen, that's all.

    I don't think they are infected.

    The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

    No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

    In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

    Genius of booking http://www.apple.com/retail/geniusbar/

    Online https://getsupport.apple.com/GetproductgroupList.action

    check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • downloaded in a wrong language and now cannot read you prompt to correct

    Somehow Adobe Acrobat uploaded in the wrong language and now I can not read the prompts to return to English

    Change language http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html cloud

  • I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

    I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

    Hi iambjan,

    I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.

    You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

    Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

    1. Go to find my iPhone on iCloud.com.

      If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

    2. Click on all devices, and then select the device that is lost.

    3. Click on lost Mode, then change the information or lost the stop Mode.

    If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

    SEE ALSO
    Remove credit and debit of the portfolio (or book) maps

    iCloud: use lost Mode
    https://support.Apple.com/kb/ph2700

    Kind regards.

  • iOS 10 - now I touch Touch ID, * and * press the Home button to open iPhone?

    I have an iPhone 6, and today I have updated to iOS 9.3.5, to 10.0.1.  One thing I noticed that really bothers me, it's unlocking the device.  With iOS 9, I had to touch the Touch ID to unlock.  Now I touch the ID to touch and sometimes it unlocks, and sometimes, I see 'Unlocked' at the top of the screen and "Press home to open" at the bottom.  I have to press the Home button to open the phone.

    It seems to me that having to push the home button more often will put more wear and tear, causing to fail more sooner than it otherwise.  Who thought it was a good idea?  It is perhaps a subtle boost to force me to update the iPhone 7, with his home in the solid state button?

    I think it's something that needs to be modified in iOS 10.0.2.  Make sure that touching just the Touch ID opens the phone each time, as iOS 9 has done.

    Happened to me too.  To repair. go to General settings accessibility HomeButton scroll Restfinger unlock... .and turn on.

  • When I opened a Web site, it seems quite wrong. Everything is white and all centered page to the left. I checked Firefox by pressing the ALT key, and it is already set to "basic page style". So there must be something else.

    When I opened a Web site, it seems quite wrong. Everything is white and all centered page to the left. I checked Firefox by pressing the ALT key, and it is already set to "basic page style". So there must be something else.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

    Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

    Hi John,.

    Please let me know exactly what happened when you tried my suggestions of first and second.

    Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

    When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

    With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

    Tricky

Maybe you are looking for

  • Purchase of a used (without the original invoice) macbook air

    I'm about to buy a macbook air. The seller gave me the serial number only and not the original Bill. The product is under warranty. Is it safe to buy it?

  • Toshiba 46TL938G DLNA servers subtitles work, but USB only

    If I play something with subtitles of DLNA does not work. But if I copy this exact film and .srt file on a USB and put it in the 46TL938G, it does not work. In any case make subtitles of DLNA? P.S. in any case to date ridiculously obsolete Media Play

  • Satellite A60-102: error with an autodesk autocad 2006

    Hi all;Autodesk autocad 2006, I installed on my computer laptop satellite SA60-102, but it did not run and it displays an error saying 'DBX CASE 0' with 'ok', although I installed it on my desktop pc and it worked very well. I need your help ASAPNaim

  • Put the string value in a table

    Hello Probably an easy question, but I am reading data of a RFID reader that returns a string value of 12 bytes. Whenever a RFID reads, I want the tag to be inserted in a string table on the front panel. So, basically, a newspaper of the each tag [re

  • Unable to turn on Windows Defender error: 0x800106ba.

    Original title: windows defender error. I get an error of windows defender, 0x800106ba, whatever that means?  I am not able to turn on the Defender because of this error...