Pressing the 'Return' soft button quickly

Similar Questions

• When I press the 'return' or 'up' button, files always bring me to the top of the list.

  When I press the 'return' or 'mounted' in any file button, it always happens show the top of the list of files or folders, not where I was. Let's say I'm looking in a file and got all the way to a file starting with "M" - when I double click on the file, and then click the back button, it brings me to the beginning of the alphabet (aka, at the top of the list of files/folders) and I have to scroll all the way down to where I was. I don't remember all the previous versions of windows, in doing so, but I could be wrong - if it is a new feature, is it possible to turn it off?

  I want to emphasize - I have seen a lot of suggestions dealing with this problem on the internet, but not what I'm looking for. This never happens for me on the internet, ONLY in the files of the computer.

  Thanks in advance for your suggestions!

  Hi CFive,

  This detail of navigation seems to be design / in the XP operating system by default. There is no way to disable or change this feature.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error on startup: "to interrupt the normal setting, press the blue ThinkVantage button.

  Original title: Windows XP doesn't start until

  When I turn on my computer it stops starting after the initial screen, what is the ThinkPad. It is said: "To interrupt the normal setting, press the blue ThinkVantage button", but nothing happens. If I'm fried?

  Hi GordonYa,
   
  Here is an article dealing with this issue. Follow the steps listed in the article for this problem:
  Troubleshooting hard drive problems - ThinkPad

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• When I press the C.D.button to put on a dvd, it does not open!... ahybody knows why? It will really help me.

  When I press the C.D.button to put on a dvd to watch it does not open... anyone know why?... I could use your help!

  Hello

  It seems like a hardware problem, so I suggest you contact the manufacturer of the equipment.

• Add TextField by pressing the return key content

  Hello

  I would like to know if there is, okay, there is certainly a way, to add TextField content to a list by pressing keyboards return button/key. So far, I use a button 'Add' but this feels kind of stupid to enter text and to confirm twice (key first, then return the Add button) to add it to the list.

  Thanks in advance

  Use the properties of your TextField. for example:

  // Default empty project template
  import bb.cascades 1.0
  
  // creates one page with a label
  Page {
      Container {
          layout: DockLayout {}
          TextField {
              id:myText
              input {
                  onSubmitted: {
                      myLabel.text = myText.text
                  }
              }
  
          }
          Label {
              id: myLabel
              text: qsTr("Hello World")
              textStyle.base: SystemDefaults.TextStyles.BigText
              verticalAlignment: VerticalAlignment.Center
              horizontalAlignment: HorizontalAlignment.Center
          }
      }
  

• Having to press the shutter twice button for the image on T3i

  Until yesterday, I had no problem taking pictures - I am fairly new with a DSLR, (the T3i is my first), and yesterday, I was watching a video tutorial on this particular camera.  I went through the camera settings with the instructor via the menu settings, etc.  Today, I can't get the shutter to work the way it's supposed to!

  If I hold the trigger to halfway, I get the autofocus to work as usual, but when I continue to push the rest of the way, the shutter closes. I have to press the shutter button a second time before I get a picture of output.  I went in the custom functions and erased all settings, (in the case where I had inadvertently put something that I didn't know I had done ), but I always have to press the shutter button twice.

  Nobody knows what happened, or what I do or not do?

  TIA!

  cicopo wrote:

  It seems that you have defined for MIRROR LOCK UP if you get a picture on the second press.

  Thank you!  That was the problem!  I thought I had cleared up all the changes I had made, but apparently not...

• How can I save the Capture screen image to a file automatically when I press the screen Capture button?

  I want to know how can I do so when I press the button on my keyboard, to do a screen Capture, it automatically saves it in a file?

  I want to know how can I do so when I press the button on my keyboard, to do a screen Capture, it automatically saves it in a file?

  ==================================
  The free Gadwin Printscreen version could be
  what you are looking for:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Gadwin PrintScreen download screen
  http://www.Gadwin.com/download/
  (scroll down to: Gadwin PrintScreen 4.3 freeware)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Web site does not load after you type the address and pressing the return key

  I just downloaded and installed Firefox for a second time. First, I imported my IE settings. The second time I did not import the settings. Both times, after that I have type an address in the address bar and press ENTER key nothing happens. I even tried the subject: config and nothing happens.

  If you are in a corporate network environment:

  20.0 Firefox has a problem with configurations where your Windows profile is stored on a server using a UNC path (for example, \\userdata\greg). Currently, there is a solution for this. A solution could be to choose a local folder for your own settings of Firefox, but that could not be authorized by your COMPUTER. Even if it's less safe, if you need emergency of Firefox, you could install Firefox 19.0.2. This article has a link under 'I still want downgrade': install an older version of Firefox.

  If you are in a home environment or the local settings folder, then please ignore the above.

• Compaq v3000: need to press the power on button repeatedly

  Hello

  My compaq must support the switch several times, and lengthwise, press. Sometimes, but sometimes not. im not using batery because it totally dead, so im used directly to adapter charger.please help to understand

  Hi @sitimariam,

  Welcome to the HP Forum!

  It is a wonderful location to converse with the community, get help and advice. You have a rewarding experience, I would include the following link for your perusal and reference. First time here? Learn how to publish and more

  I understand that it becomes difficult to turn on your laptop. Currently, you have to press on and press and hold power for long periods and several times before it will fit.

  First of all, we exclude the adapter as a cause.  HP laptops - tests and using the power adapter AC. Are you connected directly to an electrical outlet or by using a power bar? Have you tried different outlets?

  When you connect the AC adapter to the laptop, you see a led to indicate the port will be able to?  What is the power port appear loose? You can also try to clean your laptop. It is possible that dust makes it difficult to connect.  HP Notebook PC - cleaning your laptop PC.  Once you have started, you see error messages or have other questions?

  Please let me know the results.

  To help visitors and members to find solutions that have helped others, please consider choosing "accepted Solution" " " on the post that solves your trouble. " This will give it more visibility and make it easier to find.  "Please consider clicking on the" ""Thumbs Up Icon " below to say thank you for you help.

• foobar2000 starts when you press the Play/Pause button on Sidewinder X 4 keyboard

  As the title suggests, the lance keyboard play/pause key the program foobar2000. No idea how to prevent this?

  It turns out that my Microsoft Mouse and keyboard Center not has not been entirely updated. I do not have the most recent version has caused some of the buttons to not work as expected.

  In any case, I found a solution to my problem - thank you for your help.

• BlackBerry Smartphones BB8900 'blocking' when you press the green phone button

  
  

  Hi and welcome to the Forums!

  First of all - regarding your hope that RIM will see your message - these forums are a chain of support to users, not a conduct of user-to-RIM.

  Frontline for BB is, contractually, not provided by RIM, or volunteer on these forums. Companies and authorized resellers are responsible for the front line of official support to end users. It is possible to bypass your carrier and request direct assistance from the RIM, but this generates costs, since you are without your support contract with your carrier. The "Support & Services" tab to the top of the forum pages provide information on this subject. But, if you go through your carrier for support, they can degenerate into RIM without cost to you if they choose to.

  So with this prelude to reset your expectations, there are a few things you can try...

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  You can also check your carriers BB OS download site to see if they have released a new device than what OS version you are running. You can find through this Portal:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Good luck and let us know!

• 3.3 air, how to hide the menu soft button?

  Hello

  It seems that something has changed.  When I compile with flex 3.3 4.6 + Air, I now get on nexus Galaxy menu even button with sdktargetversion = 11.  Any way to target 11 but to get rid of the menu button?

  Thank you
  

  With Air 3.4 the bug is fixed.

• HP laptop PC 2000 is hanged I press the power on button product ID is E3B41PA #ABG

  Hello. I am facing a problem is that when I turn on my laptop, it crashes and don't show any type of display and bright keyboards are on. After 8.9 tent the sytem starts up properly but after 15 or 20 minutes it restarts again and again.
  I run HP PC Hardware diagnosis UEFI and it gives me a failure message with ID 0U097F-6MV766-MFGJXG - 03 404c failure
  the test of the system
  
  Any help please!

  Hi Awaislftikhar,

  The next step to replace the memory. The link I provided in my last post will give you consistent references.

  Thank you

• How can I set up a structure of the event that sends text when the user presses the button "Return"?

  I'm new to programming of the Structure of the event.  I am trying a program which causes the content of a control to the string to be processed when the user presses the button back in after typing in the control of the chain.  I think (I hope!) that it is simple, I just can't understand how do.

  Basically, I would take the attached VI and change so that the user can send the value of control 'String In' to the indicator "String Out" either by pressing the 'Return' key or press the button 'send string. '

  Any help would be greatly appreciated.

  This example has nothing to do with the RETURN key specifically.  It fires all simply whenever the value of the control is changed.  If you click outside the text box or on another still controls the value changes and still the event is raised.  This is often the desired so if it works in your application, you good to go.

  You CAN ONLY answer a particular key if you wish.  Set your event to meet 'This VI' > key down.  Then, read the proposal Vcle on the left side of the structure of the event and compare it to the RETURN (for example).  The Boolean result of the comparison gets connected to a structure to deal with your code to run inside.  You can also wire Vcle directly to a case structure and execute different code based on which key was pressed last.