Preview RAM and general issues of speed

Similar Questions

• Update preview DNG and metadata issue

  I am fairly new to work with RAW files and hit an irritating problem that I'd like to help.

  I just did a shoot in which the camera (Nikon) unable, for some reason, set a good white balance. All these NEF files had seen terrible. I have imported the naves with convert to DNG and started working on the DNG. It was easy to find a white balance decent, I applied to all concerned images. I then ran metadata > preview DNG update & metadata.

  I expect this to create a new Preview file that would replace the one created with the bad white balance. This isn't. As I sail in this series of photos, old saucy clips keep appearing, andI have to wait for them to be replaced with the current versions. It's long and tedious, since I have to keep looking at those brutally bad previews.

  What is going on? "Update preview DNG & Metadata" seems to be a simple term with little room for argument. Is there any way I can, in fact, Update DNG previews and lose the 'old'?

  What look like thumbs in the Finder? That's where you should see the previews DNG has changed. The extracts you see in LR are in the file catalog Previews.lrdata Lightroom 3. They should get rebuilt automatically, but you may need to delete the lrdata file to get rid of the old previews and they will all be rebuilt, which will also be your time.

• Export and general issues of file

  Hey guys,.

  We do a lot of catalogs from 8pp to 24pp and seem to have a lot of questions on export-exporting and just using the files.

  My system is as follows

  Intel Core 2 Quad Q8200
  4 GB of ddr3 RAM (only 3.5 get used)

  Windows XP pro SP3

  and Adobe CS3 Master Collection

  
  the catalogues are very heavy images and I was wondering if the following situations can cause problems:

  File Jerkness overall while navagating through documents.

  -Is a common problem?

  -several images with an effective resolution of more than 1200 will cause jerks

  -All placed images should be as close to 300 PPI as possible?

  -Make Illustrator files with mixtures of blur and transparency (I recently had a problem with that)

  PDF export

  -Computers just crash

  -Sometimes have errors of jpeg.

  -Errors of memory

  All files get packaged prior to export and all the CMYK image color profiled.

  We use master pages and character styles or paragraph and errors occur on multiple computers.

  
  So basically I was wondering especially if it's how we create and place documents or is it a problem of computer hardware/software.

  Any help would be appreciated

  Thank you.

  Probably a bad image on this page.

  Try to divide and conquer searching for it:

  Remove half of the page objects. If it exports, it is in half you deleted, otherwise it is always on the page.

  Return the objects to delete. If the bad object is in this group, remove half of this group, otherwise, remove half of the other group.

  Repeat until the object is isolated, should only take a few tries, then rebuild this image and replace.

  Moreover, my first suspects would be EPS. It is also possible that several objects is a problem, but it's less likely.

• Why AE CC 2015 preview RAM work fine on one computer and not on another?

  Hi all

  
  

  So I know it is the subject of news at the moment and maybe this has already been answered, but to be honest, I don't have time to go searching for the answer!

  
  

  Basically, I can't work on the same project, the same version of AE on different machines. Its a little ridiculous!

  AE works very well on this machine:

  iMac 27' end 2012

  Intel Core i7 3.4 GHz

  16 GB of ram

  NVIDIA GeForce GTX 1024 MB 675MX

  Merger of 3 TB drive

  AE is unusable on this machine: (terrible ram preview, frame rate, audio crackles and breaks autour shifts)

  IMac 27' end 2014 retina

  4 GHz Intel Core i7

  32 GB of ram

  AMD Radeon R9 M290X 2048 MB

  250 GB SSD

  At present, using the retina when machine, put Im cached my project on the local SSD instead of using an external. Maybe AE doesn't like it? Perhaps 250 GB is not big enough to keep him happy? Or theres a conflict with graphics card? These are the only things I can think of. Any advice/insight would be much appreciated.

  Thank you

  It's probably the AMD card and configuration. For example, on my old Mac Pro or even on my Mac Mini, if I add the render tail to the bottom of the timeline and its size down so that it has almost completely disappeared I get previews ram perfect even with 4 K images. I can't do anything to my MacBook Pro with Nvidia card. See how to make Cue down at the bottom?

  

  4K warp stabilized 30 fps video from an iPhone 6 s + real-time preview on a Mid 2011 Mac Mini without any problem at all.

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• Satellite P200 - 1 K 9 and performance issue

  I hope IM this ad in the right area...

  Hello

  I have a Satellite P200 - 1 K 9 with the following specifications:

  Intel Core 2 Duo T7700 @ 2.40 GHz CPU
  3 GB RAM
  32 bit
  Note Windows experience 4.8

  ATI Mobility Radeon HD 2600 map graphic and one
  HD sound card...

  My problem is that since I bought my laptop about 7-8 months ago slowed down the performance. Of course, since then I had filled my hard drive (partition) with the media and understand that this is at the expense of the performance of the system. However, since this grateful I released a lot of disk space. I have 40 GB free on my C: and 90 GB free on my D:. Total, shared capacity is 250 GB (125/125).

  Basically, while being largely ignorant of the technical questions, laptops and technology altogether, the way I noticed the inability of systems to "return" to its original factory running (which, I might add, I was very impressed by) is when it comes to games. Football Manager 2009, for example running very slowly. I had a peek in the Task Manager, because I play the game in a window, and the CPU usage works 100%, although I'm sure the culmination of the individual tasks and Applications is not equivalent to that (maybe there is a program hidden Hogging my CPU speed?). Call of Duty 4, which took place on medium-high graphics settings when the laptop was new, now struggles on the lower graph and the sound settings, without that there is a problem with internet connectivity. In addition, (for reference, I m not not the game breath) Battlefield 2, which is about 3-4 years of age very slowly also works. He ran too extremely fast, on the highest graphics settings when the laptop was brand new.

  Basically, what I want to do, is to return the system to its original performance. It is always too slow when two hard drives were full of games and media. Now, despite the withdrawal of many of them, the system works like a sloth.

  Means I ve done to solve performance problems are: disk defrag, disk clean up, error checking, virus scan (with Kaspersky), scanning of spyware (with PC tools Spyware Doctor), deleted the old files with CCleaner and erased files not deleted with a program called eraser... As well as the release of about 50% of the disk space.

  Add to that, I ve noticed performance was much more when I first turn on the laptop and the sides of it n t had the chance to become hot. I understand what is normal, and he did before when the laptop was new and was operating at optimum performance, but perhaps I have an overheating problem? I'll let you know what is the temperature, but I put just t know.

  I hesitate to return the system to its factory settings and if necessary I'll take to a computer store, if there is something they can do. But in the meantime I d like to listen to any advice on general issues that I face, and possible solutions to my problem.

  Thank you very much.

  The problem with Windows is that it becomes slower and slower that you operate.

  When the devices and programs are installed, they increase the size of the registry, activate the Services, add resident DLLS and drivers, slow down the file system by adding thousands of files. As well, the operating system can get damaged after some time due to the loss of power and software poorly written.
  Even if you use CCleaner and other utilities and uninstall several programs, it is never as fast as a fresh installation of windows. Uninstalling programs rarely remove the program completely 100%.

  The antivirus can have a huge effect on performance, that's why the system runs great when the image of the plant is installed (which has usually no anti-virus).

  So basically if you want the system making a lot once again, you must back up your data and perform the recovery. I myself do it once a year to restore performance.

• Can I run After Effects with 2.4 GHZ Quad Core i7 Processor, 16 GB of RAM and a new SSD hard drive?

  I have a 2011 Mac Book Pro with 8 GB of RAM and The RAM Preview plays in 10 second Incraments. I want to pull out my hair! I don't have the sum of $ to buy a new computer. If I switch to 16 GB of RAM and get a new drive SSD will work After Effects, or I lose my $$. Please help, I have a very important project. It is about 12 minutes long and I need to add a lot of sequelae to complete my project

  First of all, you have optimized your system: Optimizing after effects of performance - Support Adobe

  Second, it looks like you are fairly new to AE and that your workflow is not very effective. Here's the deal. After effects is not an editing application, it is a graphics and compositing designed app to create shots or short sequences. In addition, I would say that more than 90% of my AE projects are less than 10 seconds, because I created shots (with handles - extra images) I'll change in the body or some other NLE. Some of these comps second 10 have a hundred layers or more. If I had to do 12 minutes into a movie I would fuck the cut first in Premiere Pro to understand what was the best way to tell the story, then each shot than necessary effects would become a separate AE comp. At the very least each scene must be a model. In most of the stories that are told, as a film, a scene are only a minute or two. The average is probably less than 6 seconds. I can't imagine putting together 12 minutes in a single model AE, not because I couldn't, but because I would probably change the "timing" of some of the cuts, edit audio or make some other change before I made and changes in the middle of a project of 12 minutes would be a nightmare.

  Here's how a work on almost all editing projects.

  • First installation in a NLE such as Premiere Pro until the story is logical
  • Put the shots in AE requiring animation or effects
  • Inside AE, I first make a test pencil to check the overview and animation timings with the Panel of the model to 50% or even 25%, and automatic resolution scheduled to ensure that the timing is ok
  • Effects are added and critical frames are checked 100% for color and everything else but I rarely to ram preview several frames because I'm already happy with the calendar
  • The model is sent to the SOUL (Media Encoder) or sometimes the cue to render to render in a production format appropriate (usually 10-bit or better, often a sequence of images)
  • If the model is sent to the SOUL I continue to work on the next shot until I finished all the effects work
  • The effects of rendering images are reduced in the NLE to replace shots in the rough cut and editing is polite
  • The project is then added to the hearing for the final mix
  • The final color ranking is made - usually in the category of speed or resolution
  • The final product is made to a production for archiving format and a format of distribution (usually h.264 mp4)

  There are a lot of bounce back, but it's the most effective way to work on any project. Have you noticed that an overview of full resolution RAM full length does not at any time?

  If installation requires only a few short shots or sequences to AE, I will occasionally use Dynamic Link, but most of the time all the effects work is made. It just makes it much more efficient.

  I hope this helps.

• Font managers of the RAM and fonts

  Hi all

  I feel that the ability to enable and disable individual fonts using font (font book or third party) management software is designed to eliminate RAM memory (or at least somehow the unloading of the treatment of the Mac).

  I also believe I read that he mentioned somewhere that all fonts placed in the user/Library/Fonts location are always active in the RAM, and this is perhaps why it is important to not just throw hundreds of fonts in this folder.

  I wonder:

  -If above are true?

  -If you use third-party font management software to disable a font placed in the folder User/Library/Fonts eliminates actually he RAM memory (as is probably for policies outside the system of appointed police records)?

  -If none of this is true, then why even should we use font management software to disable or deactivate fonts - why not just let them all turned on if they are not in the RAM?

  I want to make sure that I fully understand. I hope that this will help me make more informed decisions about my workflow of font management.

  I'm under El Capitan 10.11.6, although I don't think that this specificity is relevant.

  Thanks for the informed answers!

  I don't think you are quite correct, I hope someone will correct me if I'm wrong but here is my assessment of the situation...

  All installed or active policies are not loaded in RAM at startup because it would be than a useless on memory limited to Macs. System fonts will be loaded into memory as they are usually required.

  I believe that certain police functions get cached, such as previews of the fonts that are used in some applications, these selection committees are often written cache files stored on the drive that I can tell.

  Installation and activation of the thousands of fonts may cause some problems as apps may need to generate previews of these fonts - for example MS Word has its own custom selector of fonts that use the real font for names selection. Some design apps can analyze or search fonts when opening certain documents with the related font styles. Other applications such as TextEdit, Mail system use based Gatherer so that they benefit the plan puts large fonts in cache.

  The reason of FontBook is to assist in the management of fonts. OS X uses the 'library' system to allow multiple levels of abstraction, by example/System/Library is for OS-level files (stuff own apples), / library of the third parties who rely on the scale of the support system, ~/Library for user specific files. There is even in charge of resources to be stored in/Network/Library for use with a server on a WAN.

  Manage all this complex without a central application. In my view, that order preference is the user on the highest levels, so your own user fonts folder is selected on the system if you named the same way fonts. Part of the idea is also that you can export fonts in your own home library without affecting the other users of the system.

  Third parties also have police managers this attempt to 'do the right thing' based on what documents and applications you use. These are for most major design offices that use custom fonts or is needed to deal with versions of specific fonts, variations and even if the fonts are licenses for specific customers etc.. Fonts dynamically loading & unloading can cause headaches depending on what software you use.

  I do not think that average users need to think about fonts on OS X (beyond adding their favorites occasionally), you may be overthinking it unless you're in lots of design work.

  If you are concerned about running out of RAM, you probably need to install more, get a better Mac or run applications less. Just keep in mind what OS X tent now to use all the RAM available most of the time if not what is the point of installing it?

• NB550D - is RAM and OS update worth it?

  HI -.

  I have got a NB550D and generally happy, but would like to improve performance. Plans is just an upgrade to 2 GB of RAM & leaving with Windows 7 edition starter or go to 4 GB of RAM & upgrading to Windows 7 Home Edition, but later would cost at least £70 more wondering if it's worth the trouble.

  I'm not bothered by the limits as office & have managed to overcome the problems of reading DVD of Windows 7starter but want the base system to run faster. Has anyone done one upgrade & there was a significant improvement?

  Separately if I upgrade the operating system do I need to reinstall the programs etc?

  Thank you

  Hey,.

  Are you not satisfied with the performance of the new NB550D or why you want to upgrade? I mean these netbooks are designed for mobile use and therefore it excellent camera s. very portable, small and light.

  2 GB of RAM is usually enough to Windows 7 If you n t run 3D games or programs to CPU usage high such as video editing or something else.
  Also I m not 100% sure, but probably the chipset limitation is 2 GB of RAM. Have you checked the user manual on the upgrade of RAM?

  Anyway, it of important that RAM upgrade.

• Pavilion 15-p045TX: HP Pavilion 15-p045TX RAM and SSD upgrade?

  Hello Sir/Madam,

  I want to upgrade RAM and HDD (SSD) in my computer laptop HP Pavilion 15-p045TX, please answer my money issues:

  I have a 64 Bit Windows 10 installed on my laptop.

  Associated with RAM-

  (1) I have 2 RAM slots, 1 is used with ADATA 8 GB of RAM, which is the maximum limit of RAM that I can use in my second slot (8/16)?

  (2) is it expandable to Rams 2 * 16 GB (32 GB total)?

  (3) can I use any brand DDR3 8 GB / 16 GB of RAM?

  (4) there must be 1600 MHz? Or 1333 Mhz will also work? What is the best?

  Associated with SSD-

  (1) is there a limit on the size of the SSD memory support? 1 taken to support?

  (2) can I use any brand SSD? Transcend SSD 370 s 250 GB and Samsung 850 EVO 250GB OK?

  Linux 64-Bit installation will make a difference on Performance or questions above?

  --

  Thank you

  Sandeep

  Here is the Service Manual:

  Manual

  See page 3 of the memory card. It is said 12 GB is the maximum, but we know from experience, you can install 2 x 8 GB in total 16 concerts. No 32 GB. It must be low voltage, and if you already have a single module of 8 GB you want to duplicate its specifications. If it has 8 black blocks on the side, you need to get a module like this.

  It is not easy to work on this system. You must remove the top cover to get to the hard drive Bay and remove the motherboard to add RAM. See p. 105 and 116.

  Module of memory of 8 GB 693374-005

  There's a 16 gig module listed, but it is for AMD laptops with a single location and will not work on your motherboard, even if you could find it.

  https://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8 & qid = 1475841671 & SR = 8-1 & Keywords = 693374-005

  

  You can install a type SATA 2.5-inch 1 TB SSD. There is no definitive list brands supported. People sometimes have problems with some specific SSD as some determinative seem to cause problems, but the Evo to Samsung 850 is a good choice with a record few if any questions.

  The computer does not know if she is running only Windows or Linux and the RAM or the SSD works with Linux or Windows, or in dual boot. The Linux kernels current used in the current distributions like Ubuntu 16.04 SSD handle very well with a maximum return.

  Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I changed my ram and something is wrong

  Hello

  I am having trouble with my MacBook Pro. It's from early 2011, and it got REALLY slow down recently. Everything seemed to go well in general so I bought new Ram (2 x 4 GB instead of the 2x2gb installed). A few hours ago, I installed the RAM and the problem is that the computer is now super fast but it does that for a while then suddenly restart itself. Chrome and Thunderbird are also break repeatedly, sometimes after working for a while, sometimes they crash at startup.

  I tried to install El Capitan, but I get the message ' year error occurred "3 times already (I'm still on yosemite because my computer was so slow and almost died).

  I ran a program called Rember and I received the following message:

  "FAILURE: incompatibility of data to local address 0x0000000175271d80."

  "Actual data: 0x0000000175261d80.

  Is it possible that something is in conflict with the new ram I have installed, causing the failure of the system?

  A note: I bought a set of 2 x 4 GB of ram before and they did not work at all - my MacBook Pro would just keep rebooting. Now it's different because the computer running for a period of time (about 30 min to an hour).

  I hope someone can help me solve this problem.

  Thank you

  What happens when you install the RAM of origin?

  Macs are very selective with regard to the RAM.  What brand did you buy and what are the specs of the RAM?

  Check if your MBP had the kernel panics.  If so, use these instructions to post a:

  https://support.Apple.com/en-us/HT201753

  Ciao.

• Qosmio G20 - RAM and GDD upgrade advice needed

  Hi all

  I have decided to try to give my old g20 renewed life with a few updates, but could do with a few tips before you start to throw money at it.
  The first and most obvious update will install two sticks of 1 GB memory and I was thinking about crossing the old hard disk of 80 GB 5400 RPM to something big and I hope more quickly as a 320 GB 7200 RPM, any advice on this would be appreciated because I don't know if this is possible.

  I was also wondering if the cpu can be upgraded and if someone knew were I could get a new mine cpu fan has become noisy.

  Thanks for you time all tips, ideas and input would be much appreciated.

  2 x 1 GB RAM will be fine. You must use the RAM that has the same speed and timings of CASE/RAS similar as the original of the RAM. Avoid the "Value RAM."

  With respect to the HARD disk, a 120 GB should certainly work, but 320 GB * could * be too large depending on what the Chipset and BIOS can support. Maybe an other G20 owner here it can confirm works, or search the Qosmio for "HARD drive" section

  With respect to the processor, you must be careful when upgrading it. Look at the other models of the G20 and determine what the CPU the fastest they have. This way you can almost guarantee it will work properly.
  If you install a faster processor is faster than what is available in the range of the G20, may not be detected correctly and the cooling fan isn't able to manage the production of heat, causing the laptop overheats.
  Also, I think that a special utility must be run to calibrate the CPU. In my view, that the ASP have access to this utility. The CPU can run very slowly if this utility is not running.

  An FSL may replace the noisy fans for you and remove any accumulation of dust at the same time.

• Pavilion g6 - 2217cl: the HP Pavilion g6 - 2217cl RAM and CPU/GPU upgrade

  Hey there, I am looking to upgrade the RAM and CPU/GPU on my G6 Pavilion. Here's my current characteristics;

  Laptop model: HP Pavilion G6 - 2217cl

  Operating system: Windows 10 family (x 64)

  Current RAM: 6 GB (used 2 slots)

  CPU/GPU: AMD A8 - 4500 APU with Radeon HD graphics card

  What are the possibilities should I upgrade?

  If more information is needed, I'll be happy to provide.

  It supports up to 8 GB of memory and the processor can be upgraded to a 10 - 4600M. Here is the Manual:

  Manual

  There is no video card to upgrade, but for the models of series AMD A video is contained in the processor itself and an upgrade of the processor also carries with it an upgrade for HD 7640 G HD 7660 G video. It's light but a bit noticeable and clock speed go from 2.8 ghz to 3.2 ghz, which is not huge but noticeable. Memory is a DDR3-1600 module, and you can replace your 2 gig with a 4 gig to spend 6 to 8.

  Memory upgrade is as easy as... CPU/APU don't upgrade not so much.

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW?ie=UTF8 & Keywords = 641369-001 & qid = 1465472116 & ref_ = sr_1_2 & SR = 8-2

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• What rMBP spec to run windows via parallels etc. - size RAM and SSD?

  The purchase of my first Macbook but must always run some windows for work programs.

  Normally just go to the 250SSD and the 8 GB of RAM, but in light of I would like to have the ability to run parallels (or other) it is worth the upgrade for the model 16 GB and 500 GB?

  Thank you!

  Virtual machines require allocated system RAM.  If you have 8 GB of RAM and 4 GB is allocated to the virtual machine, you have only 4 GB left for OSX.  Opt for the 16 GB.

  I would go for the largest SSD drive you can afford, after that RAM contributed to the maximum.  You can use external storage for future operations, but since you can't pass the internal storage yourself after purchase (well, maybe n the future if they find the right parts) buy great now.

  To clear a few boards on the side of people could give you... SSDS are very quick for the management of the 'swap file', so an SSD may speed up the system as much as if there is perhaps a bit more than more RAM.  BUT... Virtual machines require part of the allocated physical RAM of OSX making OSX less effective while the virtual machine is running.

• G62-340US: the best RAM and SSD together for an older G62?

  I want to improve my old and slow HP G62 with a new SSD and RAM and I have a few questions.

  First of all, I found two very similar RAM packs on Amazon and I don't know what is the difference or one that will work with my laptop?

  http://www.Amazon.com/crucial-PC3-8500-204-pin-CT2K4G3S1067M-CT2C4G3S1067M/DP/B008LTBJFM?ie=UTF8&key...

  http://www.Amazon.com/GP/product/B005LDLVAO/ref=cm_cd_asin_lnk

  Second, it is possible to install an SSD in the computer? And if that's the case, what is the recommended product?

  Thirdly, if I replace my hard drive with an SSD, should I buy another copy of the operating system or is at - it a way to save that?

  You want the package of upper memory which is the right speed and density of your laptop. The other memory is more recent and probably not compatible. The top of the page says memory is for a Mac that is not in itself a problem, but you may want to consider the memory recommended by HP:

  4 GB (for models 1.1 and 1.2 only) 599092-001

  http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1459805725&SR=8-1&keywords=599092-001

  Absolutely, you can install an SSD on the laptop. Assuming that your 10 Windows is activated you can do a full system image bootable Windows 10 or you can install clean media media creation tool again and the activation of just MS servers identify your computer and you will be activated again even if you change the hard drive.

  Let us know if you need help most.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.