Previous instance of the pilot still in memory - hard drive Ext

Similar Questions

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

  I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

  SD memory card

  Device type: hard drives

  Manufacturer: generic

  Location: SDA Standard compatible SD Host Controller

  Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Driver provider: Microsoft

  Driver date: 2006-06-21

  Driver version: 6.1.7601.17514

  Digital signer: Microsoft Windows

  Driver details

  C:\Windows\System32\drivers\partmgr.sys

  C:\Windows\System32\DRIVERS\sffdisk.sys

  C:\Windows\System32\DRIVERS\sffp_sd.sys

  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

  If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

  If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• I deleted all my photos and music from my mac and moved to my time capsule. It still shows my hard drive as full? I have to format

  I deleted all my photos and music from my mac and moved to my time capsule. It still shows my hard drive as full? I have to format

  If you restarted the computer, which can help the system see the

  amount available content recently removed as free to crush.

  Sometimes, a reboot with a quick operation of the SHIFT key down, can

  help the system file check and minor repairs on start up.

  • Try safe mode if your Mac does not end commissioning - Apple Support

  A moment after this restart, you should see a login to continue

  If secure boot will be available. You could repair disk permissions

  in this mode, or use it for troubleshooting. Restart normally

  subsequently pressing don't all the keys, just restart. IF that is not

  help, then try this short method to rebuild the Spotlight index; It can

  Take the time to complete the process:

  • Rebuild the Spotlight index on your Mac - Apple-Support-link

  https://support. Apple.com/en-us/HT201716

• Windows 2008 Enterprise Edition to recognize the more 2.1 TB hard drive?

  I have several questions:

  1. I have Windows 2008 Enterprise 32-bit Edition and not to recognize the more 2.1 TB hard drive.  What should do to recognize the hard drive?

  2. There are Windows 2008 Standard Edition R2 32 bit?

  3. it is possible to update Windows 2008 Enterprise Edition 32-bit on Windows 2008 Enterprise Edition R2 32 bit?

  Thank you.

  Support Windows Server is in the server instances, these forums are for individuals.  Try rather questions here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Is it possible to upgrade memory hard drive?

  I'm just trying to see if I can move on to more memory on the hard drive of my computer or if I just need to go buy an external hard drive?

  Hi tnof77,

  Hard disks have "cache" memory but thats all and it cannot be upgraded. While the cache is important, that the amount of space on the hard drive is the main point of Director. If you run out of space hard drive then, Yes, you need to either buy a hard drive more "internal" or, if you only need additional space for the files etc, an external hard drive. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org;

• Discover the usb hub and my hard drive speed.

  I would like to ask in this forum. I have a Seagate 1 TB external hard drive backup more USB 3.0. First when I bought the transfer speed still very well and I don't worry. After a few months, my data put in also increased as much time to something else as long as it is important to keep. The problem is that my hard drive now transfer data as slow as a snail. There just get 1 Mbps of transfer speed (only in my laptop, in all the hub in my laptop). When I plug it into another computer, it's fine running at 20 and 40 MB/s as normally as USB 2.0 wired hub. Another hard drive that plugged into my laptop works very well, so I guess that only my hard drive is never play well with my laptop, so that they begin to work ppliquee. I searched many tutorials that help me to solve the problem, but no one worked for me.

  Is it possible to solve my problem as something to change or update?

  I can't blame time my hard drive or my laptop because they are good, but if they linked together they do not work normally.
  I hope that all who read this can make suggestion or give a way to solve it. Thank you very much...

  Problem is a little Tricky and make me confusion

  However try to reinstall the USB 3.0 hub and USB drivers

  As you said the other disk HARD running at good speed, then the problem with your HARD disk and your computer

  Try the HDD running Test by downloading HDTUNE PRO and check the report of HDD health

• Is it OK if you are running the software on an external hard drive?

  With the Adobe products purchased, I know that it is advisable to install the software on your internal hard drive due to various registry files. I'm exhausted on hard disk space and wanted to know if these cloud applications would go with less problems than before out of a drive hard usb 2.0? I am running Windows 7. Thank you!

  You can customize the installation location to use your external hard drive.  There will still be shared resources, installed on your main drive of Windows however.  Is there anything else that can be removed from your internal hard drive as well as trying to customize the installation location?

• How can you save data of the iCloud on an external hard drive?

  How can I record data of the iCloud on an external hard drive?

  Is not possible. iCloud requires a Wi - Fi connection to synchronize data. Cannot do it on an external drive.

• How to reset the password forgotten on external HARD drive

  Hello

  I forgot the password of my external hard drive.
  How can I reset this?

  It has all my photos out there I want to come back.

  The external HARD drive comes with software that the password. Have you used this software?

  I m not very well what HARD drive you have exactly, but in the case of the password disk HARD unknown could be deleted, so I guess that by using such software.

  But I'm afraid, this is not possible and if yes, then secure files could serve more than m.

  I say it in a different way: password protection would be useless if you can remove any unknown or forgotten password. Don't you think?

• How can I copy an .exe file of the winow downloads on my hard drive?

  the header is the question

  "How can I copy an .exe file of the winow downloads on my hard drive?

  If the file is always displayed in the Download Manager window, then you can use open folder on the shortcut menu. If this entry is grayed out then the file is no longer at this location to download. Possible causes are cleaning software or anti-virus that deleted the file.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?

  How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?)

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  There is no practical way to do it.

  If you do not enable iCloud Drive on your Mac, you can upload files to iCloud by car via the web interface at https://www.icloud.com

  But you can access the files from the web interface and won't icloud drive as drive in the Finder.  You cannot use the Finder to access the files. You need to download it to use.

• How can I empty the Windows installation on my hard drive?

  How can I empty the Windows installation on my hard drive, please?  I was going to re - install, then I changed my mind.
  Now, every time that I reboot, instead of launching Windows XP Pro, it try to run Windows installation.  The installation program appears as a second menu item under "Windows XP Pro" on the black screen at launch.

  How can I remove it from the startup screen and flush it out of my system?

  Any correction, automated for this?

  Thank you.

  It is difficult to determine what you did, but the symptoms you describe can be eliminated by editing the boot.ini file (you can also make things really difficult if you make a mistake when you edit the boot.ini file, so be careful).  Will not be "flush out the Windows installation" of your system, but it will stop the menu from appearing at startup time.

  See http://support.microsoft.com/kb/289022

  Your boot.ini file probably has a second line in the [operating systems] section.  Make sure that you delete only the line that points to the installation routine.