Print and copy slow

Similar Questions

• slow printing and copying

  After replacement of the ink cartridges and install another version of Windows Xp, print and copy the characteristics of my hp f 380 all in one has become very slow, some time does not. I installed the UN and re installed the software of the product several times... no results. I installed the print and scan hp diagnostic utilities, they show that everything is OK. .. What to do

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• HP Photosmart C6280: my HP Photosmart C6280 ceased printing and copying. I use a Mac OS 10.10.5

  My HP Photosmart C6280 stopped printing and copying. I use a Mac OS 10.10.5. The printer seems to work, but no ink is on paper with a function.

  I installed a new black ink cartridge and select "black only" with the same results. All the other ink levels are sufficient.

  I would appreciate your help. The printer has been idle for a few days but a previous usage has been a success.

  Welcome to the Forum from HP Support. I hope you're well @Suz161!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems when copying / printing. I will do my best to help you with this problem.

  It looks like a problem with the printer ink. It may have dried due to non-use. I suggest that try you to perform a print head cleaning. Try the following steps:

  • On the printer control panel, press 'Setup '.
  • Press the down arrow button to select Tools and press OK.
  • Press the down arrow button to select "Clean printhead" and press OK.
  • If the print quality is acceptable, you can stop troubleshooting.
  • If the print quality is unacceptable, perform a print head cleaning.

  You can try the steps mentioned additional troubleshooting here: http://hp.care/2dVLZUu

  Let me know how it goes. Nice day!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Photosmart D110 series scanner does not. Printer and copier functions work

  my HP photosmart series D110 scanner does not. Functions of the printer and copier are working.

  I downloaded and installed the latest upgrades to OS Maverick.  Any suggestions?

  Hi @B4inSF

  I can help you to scan to your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• HP Photo Smart 110 will print and copy but will not scan for Mac.

  Recently switched to Mac computer HP. My HP Photo Smart 110 will print and copy but will not scan for Mac. I need to download a program for my Mac for scanning?

  Thank you!

  OK, take a look at this document; http://support.HP.com/us-en/document/c03379337

  Scroll to the frequently asked questions and click on one of the way to analyze the options. It really depends on how you installed your printer, but you should be able to use the print window & scanning.

  Let me know if works

• HP color laserjet 2840 printing and copy blank page

  Hi all

  I have hp color laserjet 2840, printing and copy empty, I change the toner and drum but nothing! any idea?

  Sorry for my bed English

  Thank you

  Try this test.

  Printed page in after you get the blank page open the access door and see if you can move the carrousel by hand.

  If the carousel will rotate the carousel latch is stuck.

  The lock can be fixed by disassembly of the valve and clean some foam sticky residue deteriorated and its replacement by a thin piece of material. I use stickers very thin markers of a dollar store.

• My Pixma MP495 will print and copy, but wont scan. Says it cannot detect a scanner. I'm missing something.

  My Pixma MP495 will print and copy, but wont scan.  Just says that it cannot detect scanner...

  Hello

  Make sure that the Acquisition of Image Windows service is started.

  a: type Services.msc in the start search box and click on enter.

  b: now, look for a service called Windows Image Acquisition

  c: Double-click the service and make sure that it is detected and set as Started.

  d: click apply , then ok.

  Good day!

• HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  If HP is unable to repair it, nobody else can either.  Buy yourself a cheap Canon scanner if they cannot make it work.

• Cannot install the device (printer and copier) Multifunction CANON PC-D340

  Original title: PC-d340gerat

  Hi, I am trying to install the software CANON PC-D340, but it does not work for my Multifunction (printer and copier) device. I use Windows 7. According to Canon Windows 7 is compatible. Maya

   

  Hello

  1. do you get an error message?

  2. did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Reinstall the latest version of the drivers on the manufacturer's Web site.

  Uninstall the drivers for Windows 7 computer, and then reinstall the latest version of the drivers on the manufacturer's Web site.

  Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please see the link to contact the Canon Support.
  http://www.Canon.com/support/

  Method 2: Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  You can also check out the article below and follow the steps there to any problem with the printer.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  I hope this helps.

• Have HP J4680C, printing and copy work OK but I can't scan.

  Scan feature stop working after trying it out a HP software update. Print and copy still work normal. I can't open the solution center to select the type of analysis.

  Hello!!

  You just need to uninstall, then reinstall the printer on your computer, the best way to do it is go to hp.com then drivers and support and download the latest drivers in this way he already has the most recent updates for the printer.

• disable printing and copying option in Adobe Reader, everyone?

  I need help?

  I want to disable printing and copying funtion in adobe reader.

  This means that for each PDF file which is shown, open or downloaded (on laptops that we use) content cannot be kopied or printed.

  We are a company of review that uses PDF forms in examinations.

  We do not have the pdf files, and they are noted in the review itself. (otherwise I might make a document secured with a password, but this is not possible)

  This means that for each review he a new PDF will add to the review (again not by us)

  For this reason, it is vital that each PDF can be read and not copied or printed.

  Can anyone help me please with this isseu?

  Thank you in advance.

  Erik Rutten @.

  Het Certificaat

  the Netherlands

  You can disable printing & copy with Acrobat.  Note that other PDF viewers or plugins may not honor these security settings.

• Print and copy permissions and update a library with new permissions feature

  I want to limit printing on a single page at a time and to limit the copy on a single page at a time. I don't like what time elapses between the instances of printing and copying. Currently I have my permissions on an initial allocation of 1 page, impression and the "new page allocation are awarded every 0 days 0 minutes 0 seconds". The "new page compensation" setting is unchecked? Activated or activated with different time settings? Similarly, I have my copy permissions set for introduction page 1 allowance, and the "new copy privilege are awarded every 0 days 0 minutes 0 seconds". Him "copy new privilege" setting is unchecked? Activated or activated with different time settings? Finally, if I want to update the book currently in my library of library for clients, should I remove it first and then import the revised catalogue of XML? Or revised authorization settings will overwrite the existing settings of permissions when I import the revised catalogue of XML? Thanks for your help.

  "They are run to: pages xxx enabled at some point" is what I was referring to change this as 'max' 1, and 1 seconds.

  So if in the admin console, you will hit the 'i' located to the right of the label (IE 'buy') for distribution to the right, you will get the permissions XML view (which is the language that I used) you should see:

  You don't need to change this (nor really want you) with the packing service (IE UploadTest) - you want really is in the Distributor permissions (and not in the basic permissions) - so that you can easily tweak it as you go along.

  BTW, with a 1 second interval increment - the original counter is not really important (especially since she she ignored for all but the first realization).

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• HP6500A more: top of page cut off when printing and copying on HP 6500 a Plus.

  My printer has recently begun systematically cut the top of the page when I copy or print from my computer.  I searched the site for possible corrections and have checked all the firmware/drivers and all are up-to-date.  So far, none of the suggested corrections seem to do anything.  New ideas or known problems?

  HI -.

  I'm not a Mac guy, but it may just be a power problem, where the rolls are not picking up the paper correctly.  First thing to try is a test page.  If she clips the top as it does in the other pages, I will try following the steps described inthis document to clean the rolls of selection.  If the test page prints correctly, it may be something to do with the printer driver or software, or a combination of both, in which case I hope one of the Mac experts on the site can ring in.

  Hope that helps.

• OfficeJet Pro 8500 a Premium: How can I preset the trays used for printing and copying?

  I love this machine except for one thing. It takes the paper for printing from the lower drawer. So I used the top plate for single supply of envelopes. Then I'm going to copy something and it makes me put the paper in the upper tray, when the lower plate is full!

  How can I determine if just use paper in the lower tray for copying too?

  Hello

  You should change the copy settings to use the 2nd tray, then you can set it as default:

  1. Click the copy on the front panel of the printer.
  2. Click settings.
  3. Click Select status bar , and then select tray 2.

  You can set the default tray by selecting set as new defaults in the settings menu even.

  Shlomi