"print" command in Mathscript recording is not the plots in BMP format!
Hi guys,.
I am creating a vi that automatically generates a pdf for my project report. I found a way to record the report directly in pdf format (in other words, I have 'print' my report to a (PDFCreator) Virtual PDF printer that saves the file in a specific folder with the date/time under his name.) "So, this was the first step to make the automatic procedure).
I'm stuck in the next step, which is adding to the report no graphics bad appearance of labview, but the plots of the victims of the Mathscript.
Yes, after you have added as input 'a' my data to the mathscript node, I use the following commands:
Figure
Plot (a)
print the image
Now, what is this sequence is to do a beautiful land of my data and then save it as "image.eps" in the default folder.
However, the eps format is not at all useful to me because I can't import the plot with the 'Add Image to Report.vi '. This vi supports the formats BMP, GIF, WMF, EMF and JPG only.
So, I want to save as BMP mathscript plot. It's supposed to be possible, but I have not been able to find a way. Using the command 'Print' for Labview Mathscript 2011 reads as follows:
http://zone.NI.com/reference/en-XX/help/373123B-01/lvtextmath/msfunc_print/
Syntax
Print (a)
Print (file)
printing (, file)
Description
Print the trace window, or save it in a file in BMP or EPS format. If the trace to save window is a plot of the image or a 3D terrain, the file must be in BMP format. Other types of plots, formats BMP and EPS are supported.
There is no way for me to choose what format I want, and it automatically selects the eps. If I use the command
print image.bmp
It gives me an error. So adding the endpoint .bmp is not the way to go.
Overall, it is essential for me to export the plot in BMP format (in order to import it into the generation of report), but I can't find a way, althouth it is supposed to work.
Any ideas?
Thank you
PS. I run Labview 2011 SP1
Hello
You must use the following command
Print ('test.bmp')
Instead of
print test.bmp
Tags: NI Products
Similar Questions
-
What is Pro CS6 support AX100 FDR Sony camcorder which records 4K in the file XAVC-S format?
I have Pro CS6 and am an intermediate user. I just bought a Sony FDR AX100 camcorder which records 4K in the file XAVC-S format. I can't Pro to import the file as a wrapper. I have to click in PRIVATE at a couple of lower levels and finally found AVCHD and you can see the clip. Does not seem the right wy to import. CS6 does support the format of Sony XAVC-S?
[Title edited... MOD]
John and Ann,
Thanks for the info. I will contact Adobe tomorrow to confirm that CS6 nor does not support the Sony XAVC-S file format.
I appreciate your comments. Phil
Hello Phil,
I can confirm that support for XAVC-S support has been added in first Pro CC.1 (7.1). I'm sure that others have worked around the issue of transcoding the footage. You can also download a 30 day trial of first Pro CC 2015 if you want to try. Just make sure that you update the application (help > updates...) after downloading.Thank you
Kevin -
Why: print from a user account, but not the other?
On a computer, we have two user account: an admin mastering (Bev), the other without (BevsGuest). Note that this is not 'the' guest account.
We have no printing problem on behalf of Bev. But we cannot print from the BevsGuest account. Sorry, but I forgot the error message we get. But we receive the error of several applications - Excel, Word, Google Maps, etc.
This who should I seek to explain the problem?
I'm sure that's enough information for someone to propose a specific solution. And I cannot possibly answer follow-up questions because I'm away from the computer at 400 miles at present.
I'm looking for simply advice. I'm not familiar enough with the Windows o/s to find out how this could happen.
My WAG is: it's a permissions problem. But if this is the case, I don't know where to look for the permissions property, which may be the cause of root, let alone how to fix it.
The problem started a few times in a few months; He worked many years. I can't say exactly when the problem started, or what has changed in the meantime, because: (1) I use the computer only every few months. and (2) someone else maintains the computer, for example to install Windows updates. Not to say that this person could have; but usually it is very minimal.
The computer is located in a private residence, not not part of a corporate network. Is there any other computers. The printer is wired, not wireless.
I could try to roll back to a system restore point. But it would be a shot in the water, and I'd rather make minimal changes.
Hello
· Who is the manufacturer of the printer and what is the model?
I suggest to create a new user account and check if you are able to print from this account or not.
How to create and configure user accounts in Windows XP
-
Printer Epson WF-7520 you see not the size of InDesign page
New printer, Epson WF-7520 is not put on the scale of sizes. Scenario: 19 x 13 document; the picture fills the page. Send to printer and printing paper of good size, but the image is in the center of the paper half. Printing marks appear. I tried all the options using the InDesign print dialog box. I called Epson and they do not have a solution. Any ideas >
found solution... Finally.
Print > change the printer settings > select correct tray. That has fixed the size of the image.
-
I tried for several days to get my Brother MFC-J615W do wireless... I am able to print and scan from the computer but not scan from the device MFC-J615W
I have:Brother MFC-J615W all-in-OneWindows 7 Home Premium 64-bitMcAfee Security CenterCisco Linksys e2000 router wirelessI have installed:Full driver & software package of brothers websiteScanSoft Paperport 11SE (scanning software) from the CD provided with the MFC-J615W...I tried to scan to Paperport and Control Center 3, but I get the following on my computer when I push the scan button on my printer itself unit...Control Center 3-2 errors:
"Unable to connect to the device. -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer. -If the device works on the other post, wait until the task is completed. [TW006]"Unable to scan. Please try to scan the image, once again, if the error occurs again, please reboot your computer and then try to start a new search. (CC-205-03031f04) "PaperPort error: "No Scanner" the default parser is not attached. Please attach your default scanner or click on the "Select" button to choose another scanner._____________________________I can't do anything else in the Control Center 3 but I tried to select the scanner itself in Paperport, which is ' TWAIN: TW - Brother MFC - J615W LAN' a when I hit the scan on the printer, it defines one then the same scan by default to "WIA" error comes again. Moreover, there is also a ' WIA: Brother MFC - J615W LAN' option in available in Paperport scanners. The WIA option does not work when I scan in paperport, TWAIN but makes..._________________________________________I first tried to install the drivers from the CD, but it does work very well so I uninstalled and did a system restore to before that I installed everything...Can someone help me?Thank you...JesseHello
1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?
2. are you able to scan or print from the computer to which the printer is connected?
If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.
-
C8180 problem: resizing recording is not the settings customized
I have a HP Photosmart C8180 printer all-in-one. I am able to print and scan regular letter paper, but I am unable to create and save a custom setting to print greeting cards (215 mm X 140 mm unfolded). When I go into preferences-->-->, then to the custom drop-down list resizing features tab options, I can enter the dimensions, but when I press 'save' and 'ok', I can't find the new dimensions on the choice of drop down menu in Adobe Illustrator or in the printer driver. So, I cannot print my map. I would appreciate your help. Thank you.
Hmmmmm... I just tried it with my install Win7 and I was able to create a "custom paper size", save it, then open a n application and select the new custom paper size and print with it.
I have included a page on what I am to research/talk to; is that what you see?
I clicked on "Custom" and got this dialog box to the right.
Define a name "" customer - whatever "and determine the dimensions... but make sure you click on [SAVE] to the right before clicking Ok."
Close these dialog boxes; Then, open your application and in the print dialog box, look for this new name custom paper size.
-
SyncToy 2.1 - synchronized records are not the same
I use SyncToy 2.1 on a 32 - bit XP system. I did a "sync" between a local folder and a folder on a mapped drive. SyncToy reports no errors, but the 'properties' for each of the files are not identical. One of the folders has 358 files (local folder), and the other has 359 files (the folder on the mapped drive). There are also differences in the "size" and "Size on disk" in the Properties window
Good living, XP
Please go through the below thread that has the explanation of the creation of .dat files when using SyncToy synchronization that could be one of the reasons why you find more number of files.
How to avoid creating files hidden as SyncToy_*.dat in synchronized folders?
http://social.Microsoft.com/forums/en-us/SyncToy/thread/8d3256d9-173f-404A-a68f-aca78382be15For additional help with SyncToy, please see:
SyncToy 2.0 - frequently asked Questions
http://social.Microsoft.com/forums/en-us/SyncToy/thread/5c021aa1-8738-47af-854D-c38d635800acKind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
PowerPoint 2007 recording is not the .ppt files
I am running Office 2007 on Vista Home Premium x 64. I noticed that when I make changes to files .ppt (not .pptx) existing and save, the changes are not stored on my drive hard (I'm not trying to save to a network drive). Furthermore, if I create a new presentation and save it as a .ppt file file does not appear in Windows Explorer and is not accessible to other programs such as e-mail applications.
I ran the diagnostics Office but it found no problem. As far as I know, my installation is fully updated with SP2.
Can anyone help? This is a really frustrating problem!
Thank you
Carolynhttp://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of PowerPoint
They should be come help you with your questions in the newsgroups Office PowerPoint above.
See you soon. Mick Murphy - Microsoft partner
-
my hotmail for sent emails page does not show the exact time of the date of mailing. can it be fixed or is it still important? However, the computer shows the date and time of the day on the date icon and time (Control Panel) and on the bottom toolbar.
The time indicated on the Hotmail messages depends on the time or areas in your account data. Head to your nickname in Hotmail and select account. In the page Overview of the account , click change next to country/region. Change the time zones for the good.
Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.
Noel
-
I'm using an iMac with OS X 10.6.8. A fax sent to me is loaded into a folder open on my desktop. The fax image is white on black al, though the original was black on white paper. It prints white on black background. How to reverse the image to black on white?
Ok. Well I don't believe that you are able to reverse the colors directly on the printer. Once the image has been saved using this color format, you will need to reverse the image on the computer first, then the corrected file printer.
You can invert the colors using the preview. Once you open the image in preview if you select "Tools" then "Color Adjust". Here you will be presented with slidered for black and white levels. To "reverse" all colors, you need to do is the slider level black all the way to the right, then drag the white slider completely to the left.
Let me know if it works for you!
-Sean
-
Illustrator recording is not the png files
I have Adobe Illustrator CS5. I have been using the same file format as I installed it on my computer four years ago. When I try to save a file I have created - a few years ago by opening the tab FILE - SAVE for WEB AND DEVICES selection and click - nothing DON'T get PAST.
I am able to save money--but not given an option to save an image format...
Any ideas as to what is wrong?
Thank you
Timmah,
Here are the instructions for the use of the cleanup tool:
https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html
You can download it here, CS5
http://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html
updated here or here and
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
-
In managing records but not the Manager server or hard disk space Explorer
Hello
I'm running a 2012 r2 vm server that has two hard drives that are assigned
lazy 1 thickness provisioned HDD 100 GB runnins zero setting the operating system that is not a problem, and
2 thin provision created originally to 500 GB hard drive now increased to 700 GB
the problem is after you increase the size of the disc, he appeared in the virtual machine, I extended the 500 GB partition to 699 GB in disk management and everything seems correct, but it does not change in the Explorer and under File/Server Manager and storage services/volumes it shows always also 500 GB...
the vm and the host have both been restarted.
any help is greatly appreciated
Kind regards
Troy
Try to expand the file system by using diskpart: https://blog.mrpol.nl/2013/08/16/after-partition-extend-file-system-displays-wrong-disk-size-in-windows/
-
No further details, how can I fix this so I can print! It happens every time I try to print a Web page, I usually have to copy the link and print from the browser.
You must select the 'proper' printer you want to use the catalogue-> name dialog box. This XPS 'printer' is the default in Firefox on Windows, until you select another "printer". I use the quotes, because a "printer" can be a physical printer (material, which prints on paper) or a virtual printer (software, which is in a file - format pdf, xps, etc.).
-
Print command does not document put in the print queue
VISTA OPERATING SYSTEM; HP Photosmart 7510
A Ctrl-P or the file/print command will invite an icon to the printer at the bottom right of the screen momentarily. However this "printer" holds no document. The printer icon disappears soon. The printer window will display the right printer, checked (default printer indicator) and with an icon in the lower left corner indicating connected to a network. The printer that is connected to the same network. Impossible to get a document to stay in the long queue so that it reaches the printer on the network.
Help / Suggestions welcome.
Hi Ranch_hand,
I'm sorry to hear you have some problem to get this print jobs to print. I will do my best to help you get back to print. Follow the steps in this document to Print Can t?. Just choose the link of Windows Vista for the steps.
I hope this helps. Let me know.
Thank you
-
Clubhouse 23 HP: HP Officejet Pro 8600 is offline to a computer, but not the other
In our office network, we have problems with printing. We have several computers set up in the network and all print on the same printer, our HP Officejet Pro 8600. However, you can print from all except one. It reports an error in offline mode. Usually, rebooting the computer and the printer solved that problem, now, is not the case. I uninstalled the printer, reinstalled and it worked temporarily. I also disconnected from the network to the printer and the computer and reconnected them both. I have also shut down the computer, the printer and the router and restarting their router, printer, and then computer. I still have the same problem with just a computer. Any help would be greatly appreciated.
I solved the problem on my own. I had to remove all the devices on the network printer and reinstall on all devices.
Maybe you are looking for
-
Is there a way to restore a computer back to complete the factory settings?
-
Problems after installing updates
I use a Web site on the Internet for over 2 years and have NEVER had any problems with it. From this weekend (after the first - the who - is - it - now? - four sets of updates for you guys) I started having problems with the site. I don't know what
-
No response at the signing of the app
Hi all Here's the situation... Software: Eclipse Indigo with Blackberry plugin installed Win 7, 64 bit A few weeks, no changes were made on this machine. Problem: Sign app click on windows with the Signature tool appears, and then only thing that hap
-
It loads but will not logon, but no error message. Dotnet 3.5.1 32-bit windows 7.
-
Date picker with errors of time with timestamp with local time zone (Apex 5.0)
Have a problem for the datePicker (with time) to work on a timestamp with local time zone database column.It works very well with the time steps, but when I add a mask to format with the time it fails with an error like: -.«Date entered stressed attr