print DigitalPersona finger scanning does not work after you install the recommended updates
My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista
Hello
1. do you have an error message?
2. are you referring to the print scan hardware or software scan print that was supplied with the device?
Method 1:
I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/
Tags: Windows
Similar Questions
-
Internet Explorer does not work after you install the kb2761451 update
Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open. So I deleted it and Explorer opens. This update is listed as important. What should I do?
The Explorer is 9.
Hello
Thanks for posting the question in the Microsoft Community!
Internet Explorer stops working after the update kb2761451 is installed.
The problem may occur if the updated components are corrupted.
I suggest you follow the steps mentioned below:
Method 1: Of reset Windows Update components
See the site:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: run the Update of the system analysis tool
See the site:
System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
http://support.Microsoft.com/kb/947821
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Re: Portege R500: controller button does not work after you install the update
After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.
I guess there is something to configure in the section "Optimizing" Toshiba Assist.
When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
I have no idea where to find this executable.Can someone help me?
Why you n t use the OS restore option?
The operating system supports the option of system restore and this helps to put the system in the previous point.Check, maybe it helps to get the old version of the Toshiba Package Value added.
-
USB does not work after you install the utility on Satellite A200 Intel chipsets
Hello.
I installed Win XP Pro SP2 on my Satellite A200-1SM and everything was ok until I installed Intel Chipset Software Installation Utility version 8.2.0.1014 (recent ones on the site of download of Toshiba; before this step all USB dev. worked properly), after all my USB devices wouldn't work. I had my windows up-to-date with updates from Microsoft, but that has not changed a thing.I use Vista once again, but still want to work one day at the XP operating system.
Please help me if you can.
Like the previous user said, the chipset must be installed as first pilot
In addition, it seems that this laptop supports the Intel® GM965 + ICH8M Intel chip.
It would be advisable to check the version of the Intel page directlyHey Buddy
-
Hi, I have edition entertainment laptop HP Pavilion dv6 Windows 7 64 bit OS. I'm used to unsuccessfully drivers every month and everything is fine, but 3 days ago I downloaded the new IDT High Definition Audio CODEC drivers. After installing his system stops working. I tried several times to back the drivers and install them again, but in both his case has not appeared. What should I do?
Hello
Uninstall the driver, and then install the codec Microsoft UAA before reinstalling the previous audio driver.
Please post your results here in your thread.
Best regards
ERICO
-
Outlook 2003 does not work after you install the update Outlook 2007 (KB2412171) _
I run Windows 7 and Outlook 2003 but the update automatic KB2412171 causes Outlook to crash into the opening with the message "Microsoft Outlook has stopped working" and the program must close so I'm not able to use Outlook at all.
Please can someone help me with this.
In these forums, you will find some support for Outlook (2003): http://social.answers.microsoft.com/Forums/en-US/category/officeoutlook ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Why the highlighting of text in a PDF document does not work after you save the file
Why the highlighting of text in a PDF document does not work after you save the file
What application you use to highlight?
-
Laptop does not work after you remove the virus win32/winfixer
Original title: win32/winfixer
I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...
Hello
1. what exactly happens when you start on the desktop?
2. you get any error message?
3. is your laptop work fine in safe mode?
4. What are you trying to download?
5. How are you trying to download?
6. What is the full error message do you get?
7. don't you make changes to the computer until the problem occurred?
I suggest you to see link below and check if it helps.
Method 1: How to fix a computer that does not start.
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start
More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041
Hope this information is useful.
-
HDMI port does not work after you refresh the computer.
Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.
Are you sure that the additional monitor is turned on. Try holding down the and then press P until it is selected to extend the screens.
If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.
-
This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update. Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop). Performance is significantly degraded. I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning. I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation. When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012). How can I remove and reinstall this security update? It is a BIG problem at the moment. Computer is almost non-functional. Thnx.
Original title: update security for windows (KB2753842)
Nirmal S, thank you. System Restore did the trick. I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with). Problem solved! My computer working again 'normally '.
Also, I learned a few new things about the updates and restorations, so...
Bravo for Nirmal S!
Kind regards...
-
Camera does not work after you reduce the screen brightness
Hello
I have an application that uses the camera in QML. It works fine, but if the screen fades while my application is open the camera no longer until I restart the application.
Here is the page of qml any camera:
import bb.cascades 1.0 import bb.cascades.multimedia 1.0 /** * Most of this code was copied from: * https://developer.blackberry.com/cascades/documentation/design/camera/taking_a_photo_with_the_front_... */ Page { property string pictureLocation: "" function closeCamera() { createReportNavigationPane.cameraClosed(pictureLocation) pictureLocation = ""; saveID.enabled = false; sheetCamera.close(); } titleBar: TitleBar { acceptAction: ActionItem { title: qsTr("Save") id: saveID enabled: false //title: "Save" onTriggered: { closeCamera(); } } // The 'Cancel' action dismissAction: ActionItem { title: "Cancel" onTriggered: { pictureLocation = ""; closeCamera(); } } } onCreationCompleted: { // Check to see if any cameras are currently accessible. if (camera.allCamerasAccessible) { // Open the rear camera. camera.open(CameraUnit.Rear); camera.isOpen = true } } Container { layout: DockLayout { } // The Camera object. Camera { id: camera preferredWidth: 768 preferredHeight: 1280 objectName: "camera" property bool photoBeingTaken property bool isOpen: false onTouch: { if (event.isDown()) { if (photoBeingTaken == false) { // Take a photo, and automatically // save it to the file system. camera.capturePhoto(); } } } // The following are examples of slots that can // be used with the Camera object to handle // the various signals that are emitted. onCameraOpened: { // Once the camera is open, start the viewfinder. camera.startViewfinder(); } onCameraOpenFailed: { console.debug("Camera cannot open"); } onViewfinderStarted: { console.debug("Viewfinder has been started"); photoBeingTaken = false; } onViewfinderStartFailed: { console.debug("Viewfinder could not be started"); } onPhotoCaptureFailed: { console.debug("Photo could not be taken"); photoBeingTaken = false; } onPhotoSaveFailed: { console.debug("Photo could not be saved"); photoBeingTaken = false; } onPhotoSaved: { saveID.enabled = true; photoBeingTaken = true; console.debug("Photo has been successfully saved"); photoBeingTaken = false; console.log(fileName); pictureLocation = fileName; var imageName = pictureLocation.substring(pictureLocation.lastIndexOf("/") + 1); var imagePath = "/accounts/1000/shared/camera/" + imageName; cameraPreview.imageSource = app.getCameraPreview(imageName, imagePath); } } Container { layout: StackLayout { } leftPadding: 10.0 topPadding: 10.0 Container { preferredHeight: 200 preferredWidth: 200 horizontalAlignment: HorizontalAlignment.Left Container { verticalAlignment: VerticalAlignment.Center ImageView { id: cameraPreview verticalAlignment: VerticalAlignment.Fill horizontalAlignment: HorizontalAlignment.Fill scalingMethod: ScalingMethod.Fill } } } } } }
Thank you
Gerry
so, there is a signal of cameraResourceReleased which you can listen to that will tell you that the camera has been arrested.
After that, you can restart the viewfinder after your application is in the foreground.
We have a corner case that we are still working on what centers around the case when the screen starts to close (causing the camera to stop), but the user he wakes up before the browser tells your application in the background. In this case, you may not receive a leading event. You can probably work around this case by launching a timer and check, after a second or two, if the application has been deleted original or not... If it is still in the foreground, then you could try restart the viewfinder
See you soon,.
Sean
-
Update: Windows x 64?
After I did a reboot the theme changed to Standard or Windows Classic theme.When I try to change the theme back there is no preview on the window and when I try to apply the theme, there's just the same thing.Hello
also try to go to your site in manufacturere graphics or computer cards and find the driver download section
Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista
You may also like to change how you receive updates for do you download this update problem still through automatic updates
for any update you don't want to, make a right click on it and hide it
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need or who have limited access to internet
-
Windows Media Player 12 does not work after you choose the initial settings
Hello
I tried to use windows media player 12 on my computer laptop windows 7 and it won't work. It worked the first time and I chose my settings, but it would not open the player itself. I tried to do it on the guest account, but it's the same thing. Does anyone know how to fix this? -ChrisMy post was actually in response to JRTLOVER:
Why we cannot uninstall and reinstall from the CD just Media Player... or is there a way to fix this?
I have seen that it was already proposed earlier in this topic, my apologies.
Regarding your problem, have you tried to launch directly executable WMP? To do this, click Start, type wmplayer.exe in the search box and press ENTER.
You should also check if WMP is already running: start the task (Ctrl + Alt + Delete) Manager, look for one or more elements called wmplayer.exe on the process tab, select each item and then click end process , then try to start WMP again.
Tim Baets
http://www.BM-productions.TK -
Windows does not restart after you install the new hard drive.
Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?
Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he
The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format
every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!
I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
And if a later version of the sata it's backward compatible?Use the utility disk provided by the manufacturer of the drive check
-
Bridge does not start after you install the cloud
InDesign, Photoshop and others work fine. Something must be wrong with my user account, with a new user starts to bridge. What can I do to get it fixed with my usual account?
Check if these are of no help.
http://helpx.Adobe.com/x-productkb/global/troubleshoot-unexpected-behavior-user-account-2. HTML
ml http://helpx.adobe.com/x-productkb/global/Troubleshoot-Unexpected-Behavior-User-Account.HT
Maybe you are looking for
-
Application failure: invalid statement 4
After upgrading to Mac OS Sierra, I get "4 the invalid statement" when running applications that worked on El Capitan (on MacBook Pro 2015). Different pages from 2009 indicate that the executable file runs a statement of unknown or not CPU supported.
-
Router wireless Presario SR5610F hangs the computer
My wireless router has failed and I got a new. My office (Presario SR5610F, Vista Home) crashes whenever I try to connect to the wireless network. (This happened at least two different routers, then the problem must lie in the computer and not the ro
-
CD - recovery system portable English German breaks down
I have a satellite pro 4600 that I bought used. I had a German recovery for her cd but it completely kills the system when I put the laptop is in English. Can not open a windows session more to reinstall. This laptop is four and a half years. Did any
-
I have a NX700 with a built-in wireless function. When I go through the Setup program tries to connect to the internet, he noted only that the wireless connection was working, and internet access and local access failed. Also, if I try to use a wired
-
Default recovery CD does not recognize my Qosmio G35-AV600
Hi, my problem is a little cranky... Portable model / type: G35 AV600 / QosmioI have the original recovery CD I try to format it using recovery CD but I have the following message"This CD is not configured for your laptop. Its Qosmio G35 model' If I