print jobs are go to a printer in offline and does not print

Similar Questions

• Photosmart 5520: Printer is offline and does not connect

  Printer is often reluctant to a wireless connection.  Printer, Mac, or a router and power off, remove the print file and print again or through the wireless set up wizard usually gets to work.  None of these steps now to get the printer to connect.  Any solution, please?

  I have an Extender.  After that it was off a page which was pending printing print OK.

  Using the Wi - Fi connection.

  Router is Asus DSL N55U router modem.

  No error message displayed on the printer; No flashing lights.

  Printer is not asleep.

  Blue wireless light is off (although the Panel displays "Connected")

  The IP address is 192.168.1.183.

  I just printed another page without turning anything off tension.  Maybe the Extender was the cause of the problem?

• HP Deskjet F380 printer shows "offline" and does not print.

  original title: have a HP Deskjet F380 printer stating 'offline' replaced new ink cartridge checked cable always in offline mode. Verified that the printer is not on the pause mode.

  Printer was working perfectly until I put in the new ink. Do check the cable (works well on a different printer). How can I get the printer to work again I'm using XP home. Checking the status of the printer and there is no tick etc. against the break point in the fax and Printers window.

  Hello

  Follow the steps in the link below and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=1128296#N71

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• Whenever I try to print something from my documents opens and says under xps. file and does not print

  Whenever I try to print something from my documents opens and says under xps. file and does not print. I also tried troubleshoot my computer and it says that my printer is not a driver and whenever he tries to fix it and says that it cannot install a driver. any help would be appreciated

  Looks like you have the default printer configured to be Microsoft XPS Document Writer.  Go to control panel > printers and devices and see which printer is enabled in a green circle.  If this is the XPS Document writer as I suspect, you can right click on your printer and then select "Set as default printer" after you do this, or if you cannot do this, answer with the brand and model of your printer and we are able to help if you have a driver problem.

• Printer is offline and will not print documents

  Printer is offline and will not print documents, the rocker switch "Printer offline" option is not available and it is constantly check on 'printer offline '.

  How can I fix this so I can print the necessary documents?

  Hello destiny.

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • Is the printer connected directly to the PC or it is on a network?
  • What is a printer wired or wireless?
  • What is the brand and model of the printer?

  Try the following and see if it helps.

  Method 1: Disable Antivirus

  If you have installed any third party such as antivirus or firewall security software, I would say you temporarily disable and check if it works.

  Disable the anti-virus software

   

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2: Update the drivers for your printer.

  For more information, see these links:

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  
  Method 3: Restart the print spooler service.
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.

  If nothing works, then manually add the printer to the local port and check.

  Method 4: Manually add the printer to the local port.

  a. go to control panel and click on devices and printers.
  b. click Add a printer, and then select Add a local printer. Click on create a new port. The default value in the drop-down list is Local Port. Don't change that.
  c. click Next.
  A dialog box appears for you request that you enter a port name. Type the name of \\computer name\printer.
  d. type your user name and the name of the printer (name \\PC\printer)
  e. click ok and exit.

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• My MX430 keeps going offline and will not print

  My MX430 is set up for wireless printing and keeps going offline and will not print.  I reinstalled the software several times, and it continues to be.  This is my only printer and is defined as the default value.

  Hello sallyb.

  Printer offline may indicate that the printer driver is not configured correctly.  Please, try the following to resolve the problem:

  1. click on start.

  2. click on Control Panel.

  3. click on hardware and sound.

  4. click on devices and printers.

  5 right-click the MX430 printer, and then click printer properties.

  6. click on the Ports tab.

  7. make sure that the check mark is on the port that begins with CNBJNP, then click OK and try printing.

  If the port CNBJNP was already selected if please try right click on the MX430 printer and click on see what printing.  When the queue opens, click on the printer and uncheck on use printer offline by clicking on it, then try to print again.

• How do I set up my hp6700 printer so that it prints in black and does not take into account all the colors?

  How do I set up my hp6700 printer so that it prints in black and does not take into account all the colors?

  To print the black ink only follow the steps below.

  1. Select Start menu
  2. go into devices and printers.
  3. right click on the printer, select printing preferences
  4. in the lower right corner, select Advanced
  5. and then under features of the printer select print grayscale a dropdown list will appear to black ink only.

  Let me know how it goes.

• my desktop icons are changed and does not directly but opening in the location of the original file.

  original title: my desktop icons are changed and does not directly but opening in the location of the original file. So how do you restore originally propertities of the desktop icons

  Mr President, due to changes attributed to the icons of the office by my children, my desktop icons are changed and does not directly open, but they are open in the location of the original file. So how do you restore originally propertities of the desktop icons

  Thank you.

  Hello

  I suggest you follow the steps mentioned below.

  Method 1: Run the Fix - it.

  Follow the link below and run the Fix - it and check if it helps.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: Run a sfc scan.

  Follow the link below and check the resulting errors.

  http://support.Microsoft.com/kb/929833

  Method 3: Perform a system restore.

  Follow the link below and perform a restore of the system to a point before, when the system was working fine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  It will be useful.

• When are you going to create a captcha which does not have international bc

  When are you going to create a captcha which does not have international bc

  Hello

  With Adobe Muse CC 20141, reCaptcha and checkbox field can be added to forms.

  Please install our latest update to try out these new features.

  Release notes | Adobe Muse CC

  Thank you

  Sanjit

• LaskerJet HP 1022: Having problems printing. Seeing flashes and does not turn off.

  I have problems printing.  I turned the printer on / off power several times to cancel the print job.  There is a red light flashing and I am unable to stop after pressing several buttons.  I apologize because I don't have a book.

  Here is your complete support page.

  http://support.HP.com/us-en/product/HP-LaserJet-1000-Printer-series/439424/model/439431/manuals

  Download your User Guide and read.  Here he also troubleshooting for you.  Good luck.

• H470 printer: HP Officejet H470 - left, ink blinking and does not print

  I have a HP Officejet H470 mobile printer.  I have a problem with the left blinker light ink (color ink). This printer should always print with black ink only, but there is a problem - left flashing and when I try to print something happened any reactions...

  I followed the steps of troubleshooting at http://support.hp.com/us-en/document/c01182351 but it does not solve the problem. I cleaned the contacts on the cartridge and the printer, I bought a new color cartridge but I still have the same problem. Can you help me?

  Hey @miamiparis,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a cartridge error on your Officejet H470 printer. I can help you with that, but it seems that you have done all the troubleshooting steps available for this issue. If this is the case, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know if you are able to reach a resolution with the support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I have changed ink in my printer HP F380 and now it does not scan printing and does not copy the computer off

  Also, I did a restore and do not know if something needs to be installed or reopened.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows