Print jobs that are often stuck in the queue

Similar Questions

• LaserJet MFP M127fw Pro: Scanning but does not print: print jobs that are just sitting in the queue

  I tried several fixes and nothing has worked.

  Uninstalling the software and printer and reinstalled from scratch.  Can see and scan, but never leave print jobs queue on the laptop

  HP Print ran and doctor Scan.  Could not get out print job, it becomes its own test in-house printer print

  I use wireless.  I tried as well to turn off wireless and use the wire and still get the same results.

  Hello

  I think you need to delete the queue. For Windows, try it please:

  Hold down the Windows key and press R.
  from the run window, type services.msc and press to enter.
  If the computer asks you to Admin, you have to accept that,
  regarder watch down to the print spooler service, right-click and select Properties
  Click the Stop button,
  Go to C:\Windows\System32\Spool\printers or C:\Windows\System\Spool\printers
  delete the job inside this folder
  restart the machine.

  Kind regards.

• Printing HP Officejet Pro 8600 stuck in the queue - Wireless Intermittent

  We have a HP Officejet Pro 8600 (CM947A) that we used it for several years without problem.  I use the version of Windows 7 Professional 64-bit.  We have two PC that print wireless.  There were several days of work began to get stuck in the print queue of the printer for both PC to print.  I can cancel the printing of the queue, but the next task will be stuck again.  I print Microsoft Word documents contain a single sentence.  The problem goes away if I restart the printer, but the problem comes back the next morning.  I have re-installed the software print and changed the channel on the router on channel 8 that uses the null in the region.  The printer firmware is up-to-date.  The HP printing software and doctor Scan has not solved the problem. The indicator on the right side of the printer's pale blue wireless is enabled when the problem occurs.  When print jobs are stuck in the queue, I can not connect to the printer by typing the IP address in a browser window.

  This problem has been resolved by the above phone support number.  We have solved the problem by changing the encryption on the router to WPA2 to WPA + WPA2.   The router is a Belkin Wireless G Plus MIMO Router P57746-B.

• printer crashes after printing 1-2... stuck in the queue of work

  Just installed HP printer and have a recurring issue.  I can send 1-3 print jobs to the printer and print correctly.  Then, the next task will be stuck in the queue and I can't remove it.  If I restart the computer, the print job goes through then the computer restarts... allowing me to print a few pages before it crashes again.  I tried the process step 10 HP to resolve problems printing, but in vain.  I am running Windows 7 and it's a HP LaserJet aio color 200 printer.  Using a USB connection.  Thanks in advance.

  I'm baaaack!

  I finally got this printer to work by uninstalling the software once again, then set up to work wireless.  Not sure if reloading is or if there is a problem with the USB cable...

• HP printer is not printing and a document is stuck in the queue

  My printer is not printing and I can't cancel the document in the queue to start to print another document.  I had this problem before and I fixed it, but I can't understand how to on this subject again.  I unplugged the printer and I tried refreshing, but nothing has worked so far.  Any suggestions?

  Hello

  see if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-the-print-queue

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  http://www.Vistax64.com/Vista-print-fax-scan/112525-printer-queue-stuck.html

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Jobs FRUSTRATED stuck in the queue on Officejet 6500 with IP printing

  

  I'm especially frustrated because I just typed in many details, and when I click on "Preview" my text disappeared. Thank you, HP!

  Like others, I have an Officejet 6500 E709n. Print a test page, the diagnosis, the HP printer utility page, I cannot print any document. "They simply wander in the queue with the message host ' 192.168.2.6 network ' is busy. retrying in 10 seconds... forever. Yes, I tried to delete and add the printer again and he gets found very well.

  I can print with USB.

  I can print with Hello (but which is slow, so I turned off)

  It's okay if my OS X 10.5.8 laptop is connected wirelessly or through ethernet.

  The printer is connected to the router Wireless Ethernet. At the present time, my mac is connected to the same router by ethernet. I just started the HP printer utility and printed page setup very well, showing the ink levels.

  I'm guessing that it is a problem of intellectual property, and that the HP printer utility uses a different protocol to connect to the printer. Yes?

  Fine, I can print from Windows 7 computer that is connected by ethernet on the same network. IP addresses are correctly reserved.

  Please, someone help. I have a forthcoming major surgery and won't be able to walk upstairs to the office, so I really want to be able to print wireless from below. I bet once wired print jobs, the wirelss go, too.

  Well well, thanks to the kind soul who wrote this:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/duplex-printing-with-HP-OfficeJet-6500-wireless/m-p/129735#M3716

  (useful text cited below)

  You can also modify an existing printer driver:

  (1) system preferences > Print & Fax

  2) click your printer

  3) click on the Options button & supplies

  4) click on the driver tab at the top

  (5) in 'print using... '. "drop-down, choose Select printer software...

  (6) locate HP OfficeJet Pro L7700 in the list

  I followed the instructions to turn my printer OfficeJet OfficeJet Pro L7700 6500n driver. Let the JetDirect Protocol.

  Now I can print when connected to the Ether - and I can print duplex. AND I can print wireless.

  To sum up: If your print jobs stuck in the queue to print on a HP OfficeJet 6500n, but you can ping the printer or you connect via the HP printer utility, the following workaround solution:

  Change the IP to JetDirect Protocol

  Change the 6500n to OfficeJet Pro L7700 OfficeJet printer driver.

  SOLVED.

• Keeps print job stuck in the queue and is not over

  Mavericks OSX 10.9.2 running.  Whenever I have print the print job gets just stuck in the queue.  I already removed restart printer, uninstalled existing SW and downloaded and installed the current drivers and (v12.34.37) and always without success.

  Now my son also reports the same problem on his Macbook (I think it also unfolds 10.9.2.)

  Someone knows how to fix this?

  Hello MrRob,

  Sorry, you have problems with the printer queues.  I have a couple of things to do which should solve this problem quickly.

  The first is to reset the printing system.  This puts the system of Mac OS x to a default known good state.  This is a doc from Apple on how to do it.  http://support.apple.com/kb/PH14141.

  The second thing to do is to check/repair disk permissions.  I do this on a monthly basis and after each update.  Anytime something weird is happening, as a feature that allows to work is not, or the options are no longer available, etc..  I repaired disk permissions.  This is done via disk utility in the Applications/Utilities on your Mac folder.

  After doing both of those, restart your Mac and power cycle the printer, readd the printer to printers and Scanners and try again.

• HP8100 print job stuck in the queue

  I have a print job stuck in the queue of my HP Officejet Pro 8100.  I tried to delete the file, but it's been blocked for a day and I can't print anything else, it seems as if the job locked up in the queue stops other jobs.

  I did the following:

  tried to delete the file-will not remove status said "deletion" for more than a day.

  power cycle

  connection direct USB printer

  power cycle - unplug the power cable, the power button for 1 minute - leaving only machine for 30 minutes.

  Nothing has worked so far.

  Help, please.

  Thank you

  DITT

  Hello

  Try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• HP officejet pro 8600 printer: print the job stuck in the queue for a printer hp officejet 8600

  I try to print a document on my 8600 pro hp officeject and printer, but it will not be printed because there is a print job stuck in the queue.  I tried to cancel the print job stuck but will not remove. I tried to turn off the printer, but it still won't delete. Can you tell me how to cancel a print job that is stuck in the queue?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.

  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.

  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• How to cancel a print job that keeps printing something that was printed by someone months now that I reinstalled the printer?

  DON'T NEED HELP ON CANCELLATION USER RECIPE IN. GUARD IMPRESSION I DON'T NO HOW TO NCANCEL

  kimsparrowwu,

  Try to run delete print jobs to remove all print jobs stuck in the queue on the computer that is printing the document. If it continues, then search for malicious software.

  Rick

• HP2710 print jobs stuck in the queue even if test page prints

  I have a HP Photosmart 2710 all-in-one printer attached via the USB port of a laptop ASUS G73Jw running under Windows 7 64-bit. The printer worked fine with a Toshiba laptop running Windows XP 32-bit only. But now cling all the documents in the queue if thay are Word, pdf or Notepad. I tried everything I could find on the HP forums. I downloaded the last software update. I ran the diagnostics HPPDU utility. After that I ran this utility test page prints fine, but nothing else gets stuck in the queue. I obeyed different instructions to disconnect and reconnect the printer, do a reboot etc after running the diagnostic utility. I tried other 'solutions' various users have suggested, including disabling bidirectional printing, restarting the spooler service and directly without the print spooler. Nothing works.

  Given that I can print a test page I doubt that it is a mechanical problem. I suspect some sort of driver incompatibility. Because I downloaded the driver more once in frustration I think there could be pieces of drivers still present, although I can't view them with the uninstall command or the Device Manager. In fact, I can't find any file with any HP device software. Maybe it's because the driver is downloaded directly from Windows 7 when you do a Plug-and-Play.

  There are a large number of driver files under everything in the printer properties. But I don't know which driver files should be there.

  I'm about to trash this printer unless someone has an idea what to do.

  Help!

  It could cause a conflict if the printer is stuck which occupies the port because it could block all communication with anything that is not this printer.  It may be something wrong with the way that ASUS manages virtual USB drivers, but I have not heard anything.  You might try to give them a call if you're really curious, just to see if they know anything.

• Laser Jet Pro 200 M251nw color: print job stuck in the queue

  I have problems with my color Laser Jet Pro 200 M251nw. I can print a MS word document and the printer works fine. When I try to print a second document MS word, that work remains stuck in the tail (spooling). I can't remove it from the queue. If I restart the computer, it went from the queue. If I print another document the process starts again. I know the procedure to remove a document from the queue but what I need to know is how to prevent them from getting stuck.

  Hello

  Please try the solutions in this doc.

• How can I get a list of jobs that are planned for the days of the future

  How can I get a list of jobs that are planned for the days of the future?

  In a previous article, I found a query that lists the scheduled tasks that are already running. Can I get a similar request for the future days which is compiled?

  Hi sreedevir,

  SELECT jobmst.jobmst_prntname, jobmst.jobmst_name, jobrun.*

  FROM jobrun JOIN jobmst ON jobmst.jobmst_id = jobrun.jobmst_id -joining tables jobmst and jobrun

  WHERE jobrun_proddt > = dateadd (dd, 1, datediff (dd, getdate())) 0, -future dates

  AND jobmst.jobmst_type = 2 -given jobs (and not groups)

  ORDER BY 1, 2 -Sort by name of the parent, then by task name

  Feel free to make any changes to your reporting needs

  ARO

  The Derrick

• can someone help me with the link to download hp2050 print drivers that are compatible with windows 8.

  can someone help me with the link to download hp2050 print drivers that are compatible with windows 8, my software CD is not compatible with windows 8, and I can't use the printer now.

  Hello

  The installation program "Full Feature" can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109407-2&cc=us&DLC=en&LC=en&OS=4132&product=4027469&sw_lang=

  Kind regards

  DP - K