Print processor does not exist

Similar Questions

• 2 printers - can print only a - print processor does not exist?

  I have two printers - one that I just bought.  I installed the new without any problems, that is a series of Deskjet 3510.  The other is a series of deskjet 6980.  I want to use two printers, but when I try to print the 6980 is not in the drop-down list.  I see when I look at the printers in my computer, but he can't see it when I try to print.  I tried to reinstall the 6980 and it says that the print processor does not exist.  Help, please!

  There's a troubleshooter created by HP

  Please try the HP printer installation wizard

  or use this link: www.hp.com/go/tools

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• "The print processor does not exist.

  I'm trying to install an XPS printer on windows 7-64, but get the message "Print Processor does not exist". Can someone help me please

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

  I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

  Yes, you can try to replace localspl.dll winprint.dll

  Create a restore point from the system beforehand and restart the computer later.

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• "Windows cannot connect to the printer. The print processor does not exist.

  I am trying to connect to a printer on my home network.  LaserJet 1020. Who lives on a different computer on windows 7.  It works fine on his 'home' of that Win 7 cannot connect to the printer. but when I try to network I get this message.  "Unable to connect to the printer. The print processor does not exist.  I downloaded a new driver from HP without success.  All of the suggestions.  Thanks in advance.

  Print processor which is using?  Properties of the printer, Advanced Print processor.   See if changing to wil Winprint allow the connection of the printer. Note the current so you can change back if required. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• Dell XPS: HP Envy 5530 print processor does not exist

  The printer is installed and works fine wirelessly.  Fix an update or antivirus protection and he was no longer a compatible printer PictBridge including PDF printer. I don't know when it happened.

  I tried different things as suggested by microsoft support. Copy the folder Prntprocs/X 64 on C:/windows/system32/spool/who was missing winprnt.dll from a work computer.

  CHecked Reg Key and winprint.dll driver added to Windows NT. There were x 64.

  Checked print spooler was carried out.

  Local printer by USB could be installed correctly.

  Puzzled!

  Hello

  If you have tried the steps as described in the post and if the problem persists, try the steps as shown in the above the below URL.

  http://support.Microsoft.com/kb/929833

• Cannot install Blue Squirrel ClickBook "print processor does not appear to be installed corectly. The printer name is invalid. "Printer - 20 and 1798 error error code"

  OT: Print processor.
  During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly.  The print processor is unknown.  The printer name is invalid.  Also "printer error code - 20 and the 1798 error.»  I need CBWP. DLL to work properly in order to be able to use this program.

  Hi Chancey,

  1. are you able to install other applications?
  2. are you able to print from other applications?

  If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.

• D110: Printer Destination does not exist - for D110 all-in-one

  This printer is connected via a Charter Communications wireless router wireless. Printing and scanning has been working well. 2 nights ago he stopped and we started getting the message "the destination printer does not exist" in the window of the printer.

  I am currently working on an iMac 10.6.8 running, but the same thing happened on a Macbook running the same. I just tried on this macbook again and he did print, although he had problems yesterday. Of course I tried earlier once more on the iMac and it did not work. I can print a page of test here, however.

  I tried the following:

  1 remove the printer and selling it.

  2 download a new copy of the driver and install it.

  3. follow the instructions to change the IP address via the web interface, stop the router and printer and then start up the two, router first, then the printer after it increased. relisted to the printer. The iMac certainly sees the printer for purposes of installation and status, but not for printing.

  What now?

  Thank you

  Ellen

  Hi@Ellen_B,

  I see you are having problems printing from Mac. I will definitely do my best to help you.

  Print a Network Configuration page to get the printer IPv4 address.

  Go to settings, wireless, print the Network Configuration Page.

  If you have a valid IPv4 address for the printer, then try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If multicast is disabled on the router, you will not be able to add the printer as a Hello device.

  If you encounter network problems, and then add the printer via the IP protocol.

• Print spooler does not exist

  I don't know if I am posting this in the right forum, but here's the question.

  My parents have a system of 64-bit operating computer laptop ADVENT. I tried to install a new printer (a Canon MG4150) but an error message appears saying that the print spooler must be started. I typed 'services' in the start menu, but when the list of services 'Print spooler' is not listed, then I can't of course it starts. Any suggestions?

  Elizabeth

  Go to the control panel and center of the Action, click on troublehooter and run the printer troubleshooter.

  In addition, run a full scan of the system with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  And update your Windows.

• HP envy 5530: E print app on my phone says this printer does not exist.

  I am trying to add my printer to my application on my phone and I get the error "this printer does not exist or you do not have access to him."

  I went on HP Connect site and it shows that my printer is online and ready to use.  I checked to make sure that everything has been updated. I'm not sure what I'm doing wrong.

  Here are a few extra in case info

  HP Envy 5530

  Windows 7 64 bit

  Thank you

  Hi @mcmoran2004

  Welcome to the Forums of HP's Support.  I understand that you get an error message when you try to add your printer to your HP ePrint app on your mobile device.

  If you get this error message when you try to add the printer to the application using the ePrint printer e-mail address, then follow the steps below.

  1. Please delete the app on your mobile device.
  2. Please turn off your camera mobile for a total of 30 seconds, and then power back on, please.
  3. Once your mobile device has completed its startup routine please download and install the application again.
  4. Please activate the application using your personal email address.
  5. After the activation of the application please try to add the printer by its address of email ePrint.
  6. If you still get any error message then, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

  Please let me know the results.

• The printer does not exist or is not available to this error message. Help, please!

  Hello

  I have a photosmart C310 premium which has been working perfectly.

  It is connected to my computer via wifi. For a few days when I try to print, I get this message:

  The printer does not exist or is not available at this time.

  However, when I go to my homepage of HP printer, it prints the test page and also contacted my printer, if I want to analyze.

  Help, please!

  Thank you

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Spool print not that does not exist

  Hello

  I have this problem with the coil of printing in Windows 8 Pro Services. This service does not exist in the services. How can I get it back? I can not install anything related to printers without it.
  PS: the problem is that he is not arrested, but there was none.
  My best regards.
  Rafik

  Hi Rapheek,

  Thanks for joining us again.

  You must copy and paste all the commands written in "BOLD" from the previous post on a Notepad and name the file as spooler.reg and save it to the desktop. Then double-click to run the file. This would create the print spooler service.

  Let us know the status of the issue.