Print rule lines in OneNote?

Similar Questions

• DeskJet D4360: why my printer prints some lines in italics?

  I recently put in a new printer cartridge and now the printer prints some lines randomly on the page in italics.  Why?  How can I fix it?

  Hi Ba-rk , thanks for getting back to me!

  I hope you had a great weekend!

  If you make a copy of something from the glass as opposed to aprint without italics, the copy comes out with italics?

  I suggest to remove the cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
  
  I recommend also to download and run the HP print and Scan doctor.

  Please hold me!

• HP C4280 print alternate lines of light/dark of a document

  New installation cartridge ink but continues to print alternating lines

  This could be something in the software, you are printing from or system of ink from the printer itself.

  There is a document to help resolve lines or streaks in impressions located here.

  I hope this helps.

• 114 the desire doesn't print all lines of text

  When you print an email (TEXT), my desire 114 printer prints all lines of text with the same quality.  Some of the lines are darker than others, some lines are barely readable or white, while some lines print only half the size of the font.  When I print a report of State printer, a few lines (like the lines 3, 6, 9 for example) do not print.

  I cleaned up, second level cleaned and aligned the printer several times without success.  Because it's consistent printing for printing when PRINTING TEXT, it almost seems like the printer receives no signal for some lines or print on paper areas.  If a JPG or image is printed, it prints in full.

  Any ideas?

  Thanks for your answer, but after all my attempts to clean the printer heads and firmly reinstall the black cartridge has solved my problem.  I think that the resettlement is actually what solved my problem because like I said in my previous post, it appeared that the printer would not print a few lines compared to others.

  Thanks again for your response.

• WHEN PRINTING MY PRINTER DELL A940 PRINTER, IT PRINTS BLUE LINES

  I OWN A DELL A940 PRINTER AND WHEN I PRINT, IT PRINTS BLUE LINES., WHAT IS THE CAUSE FOR THIS? THANKS TO ANYONE WHO HELPS ME., VERY APPRECIATED, STEVE

  Hi STEVE,.
   
  From my research, this issue seems to be common for this model of printer.
   
  Replace the cartridge of the printer to resolve the issue. Here's a post that responds to this problem of Dell support. Check if the post will help you also.
  Blue lines on the A940 prints

• My deskjet 3522 print horizontal lines with no printing on the lines

  My deskjet 3522 print horizontal lines with no printing on the lines

  I solved prolem with horizontal lines with no printing on the printer cleaning lines and lining up and will leave no paper in the tray to dust cllect

• HP deskjet 5150 does only print one line at a time

  My deskjet 5150 worked very well until another paper went through and stuck.  I was able to pull the tail of the outside before he completely crossed, thus eliminating the document.  After that, the printer went from normal to print to print one line at a time, with long breaks between the two, such that a journal would take several minutes to print.

  It happened before, and it seems that one of the many random things that I try finally works (striking out the cartridges, etc.), or he decides to forms and works correctly at some point anyway.  I don't know what is the actual active ingredient.  However, it has recovered from such behaviour several times before.

  I should mention that this malfunction/recovery routine began and most recently occurred when connected to my old iBook G4 Mac computer.  I have just this week has changed to a MacBook Pro, the latest operating system running, and the printer is not different.  It prints one line at a time.

  I don't know when this has happened to the other HP printers that I had in the past, I just put away, not realizing that they still had plenty of life in them left.  This one, I have "revived" several times already.  But how, I'm not sure!

  You have any ideas?

  Hi there chitownchic,

  I suggest paper paper jam for the troubleshooting steps that are recommended for the jamming problem you had. Generally a very good cleaning of the rollers will help a little, and also a power reset.

  "Paper jam" Error Message on the computer

  I hope that helps!

  Have a great day, thanks for posting in the community

• PLSQL question about printing the line number when an exception occurs

  Hi all
  
  My database: oracle 10G
  
  Here's my question:
  
  Explain my problem using a simple procedure, such as:
  
  create or replace procedure p_hello_world
  as
  [a few variables declared]
  Start
  [a lot of code here]
  exception
  while others
  dbms_output.put_line ('Exception occurred for the p_hello_world procedure');
  dbms_output.put_line ('sqlerrm' |) SQLERRM);
  dbms_output.put_line ('sqlcode' |) SQLCODE);
  -Suppose I want to print the line number where the exception occurred, pourrais I do, if so please help me with this
  end;
  
  Now it's the same construction that I use for my use, I have a comment in the above exception block where I need to print the line number where the exception is produced, now since I'm on so that any other article, my procedure is always succeed even if an exception occurs, but using this technique I am not able to quickly debug my code but print line number would help me a lot Please help me with this as its rescue me great distress.
  
  Concerning
  Rahul

  Try something like:

  dbms_output.put_line(sqlerrm || chr(10) || dbms_utility.format_error_backtrace);
  

  (Hoping that this is a simplified example and you are not actually using dbms_output as an exception handler...)

• Single-line print multi-line TextField

  Hi all

  I have 2 TextFields on a frame in my film. What happens is, if my connection to losses of film to a server, it starts to run a timer to continue to retry the connection every 10 seconds. And what I'm trying to do is to write in one of current advance TextFields and what 'Retry' count on what we... But for some reason, I'll try to have 2 htmlText lines appear on the same line, except the second method htmlText adds new text to a line break.

  I already put the TextField on the stage to be single line and no. WordWrap, and set the text of TLF. So how could it possible to appear on separate lines 2. ? What confuses me the most, is that I updated the TextField on the stage and in the following single line (* just to see if it helped, and there no), then why he would print to a second line is spooky in my mind.

  Here is my code:

  / * There are 2 TextFields:

  *    #1. Title/header field, this text will not change.

  *    #2. Message/info field, this is the text I want to change to each loop timer

  */

  function retry_connectSocket(event:TimerEvent)

  {

  trace ("FUNCTION IN: retry_connectSocket():");

  WBDMovie.errorMsg_textField.multiline = false;

  WBDMovie.errorMsg_textField.wordWrap = false;

  Add text to the textfield 'errorMsg_textField ':

  err_string = ' # ' + myTimer.currentCount + '. '. Retrying connection... "

  WBDMovie.errorMsg_textField.htmlText = "< font color ="#FFFFFF"size = '25' > < b > ' + err_string + ' < /b > < / police > ';

  Call function 'connectSocket()' to try to reconnect to the server:

  connectSocket();

  If socket.connected returns TRUE, then the connection has succeeded

  If (socket.connected)

  {

  Print the Message that the connection is successful:

  WBDMovie.errorMsg_textField.htmlText += ' < font color = "#00FF00" size = '25' > connection successful! " "< / police > ';

  } else {}

  Print the Message saying that the connection has failed:

  WBDMovie.errorMsg_textField.htmlText += ' < font color = "#FF0000" size = '25' > Connection Failed! "< / police > < br / > ';

  }

  }

  No idea why it is printing several lines? In addition, any ideas for why the "BOLD" < /b > < b > tags do nothing no more?

  Any ideas or suggestions would be greatly appreciated!

  Thanks in advance,

  Matt

  Have you tried to use a regular dynamic TextField instead of a TLFTextField?

• printing 2 lines exaclty where the repeatative ending image showing records

  Hello
  I develop a report. It has a frame repeatative. All fields (6) are inside it.
  Now, I want to print 2 lines exactly where the ends of executives repeatative.
  Suppose that for a particular condition, there are 6 ranks, then I want to print the lines exactly after the 6th.
  Suppose that for another condition, there are 10 lines, then I want to print the lines exactly after the 10th place.
  
  Could you please tell me how I can do?
  concerning

  Asif,

  I have proposed the use of the framework of group - assuming that there are other objects in the layout editor that could get out of a place without a group frame.

  If there is no other fields/frames other than the mentioned extensible framework, then it is useless for the frame in a group.

  However, I usually try to put executives from the group around a group of objects just because as a developer you more control where to print items - if not, they could get pushed in other frames based on the data.

  Kind regards
  Vincent

• Why print preview and print lose lines of text from the image to the screen in the browser

  When I bring up (for example) a magazine article in my browser and you want to print it for future reference, print preview and printed image 'lost' lines of text between pages compared to the original image in the browser. For example: visit this link: http://www.pcauthority.com.au/Feature/408318, how-to-make-windows-admin-easy-with-powershell.aspx?eid=2 & edate = 20150828 & utm_source = 20150828 & utm_medium = newsletter & utm_campaign = weekly_newsletter & nl = weekly and select 'Print' from the menu. Print preview that appears - poster in portrait mode or landscape - loses one or two lines of text for the print version wraps useless. Where the missing text? pagination is not identical, and Firefox seems unable to handle it.

  I use a HP desktop with Intel i7 CPU 8 GB of RAM and Win 7 Pro SP1. Firefox is V40.0.3

  I do not see "imposed by the system of page breaks" encoded in this Web page. It would be difficult for an author of a Web page with an international audience.

  You use A4 paper, but what about those of us using letter-size paper? Page breaks may screw up page print to LETTER, from a Web site to THE like this.
  And what about the 'zoom' different levels? For printing which is called scale preview of Firefox and Page Setup print.
  I put systematically "modest" when printing to save paper, to keep the last page to only a few lines, or when the font size in print preview is too great (IMO) for printing on paper. And the size of police appeared to have worsened as monitor resolutions have gotten larger over the years.

  The only time wherever I lost lines of text between printed pages was when I was "pushing the limits" with the paper up and down / page margins. IOW, too small header / footer trying to get on each page as possible. By default, Firefox a. 5 "margins (left and right) with. 5 "header / footer (top and bottom margins) = letter-size paper. With 'A' type of paper using metric would be tantamount to the margins of 12.7 mm on all four sides. The /metric of inches "toggle" is with the size of the paper, the user has selected.

  Check the Page > margins & header / footer to see if you have the parameters of ~ 12mm or it they are smaller.

• After the installation of update ver14.0.1, when you print a page on aweb site, why is that each line of the page to be printed each line on a separate page? !

  Each line in the document is printed on a separate page, IE: ten lines will print 10 separate pages for printing.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the print preferences.

• Printer skips lines and enlarged fonts between pages based on the web.

  bold text Range of printers HP c7200 connected wireless to MacBookPro w/Lion. Using the browser Firefox to version 9.0.1. Printer prints the first page very well, then the second page starts by skipping several lines and large print. PC connected to the same printer, and printer works OK. Safari works OK, too. Solutions would be appreciated.

  Problem started before the upgrade to Mac Lion. Lion updated printer driver. The same problem. Only happens when I try to print a web page or something downloaded from a web page, like a financial spreadsheet. Non-Web-based print OK. Help. Thank you.

  I saw this happen when the Page layout on FireFox browser has been set to 80% (or probably anything less than 100%). Make sure that the setting and change it to 100% and try printing again.

• Black Print skip lines at random

  When I print a document, a few lines in the whole of the page (at random), the top characters are not inking.  Another words, I demi-caracteres (only the bottom half) across the entire line.  I have on OfficeJet Pro L7580 and I replace the cartridge with a 88 HP.  I also cleaned the printheads several times and also to align the printheads several times.  Sometimes, I received a message "Unable to align" when I run this task.  All other colors are working properly.  It's only the black print on the page. Please notify.  I do not often use this printer, but I need to work properly.  Thank you!

  All the previous suggestions don't have for my Deskjet 1050 j410 printer. What does not work, for some stupid reason, is unplug the printer, then hold down the Cancel button and the color button while plugging the printer into (This restores the default printer). With each restoration test page jumped lines less until the 6th or 7th reset when it was finally clear.

  A strange but effective solution however. I hope this helps.

• Terminal watch ' print: / $ username'-how to reset to remove 'print' command line?

  Hello

  When I open my Terminal on my iMac, I ' print: /' before my user name$. It's not happened before with me and can't get on my Macbook Pro. I tried to remove plist, cd back home, but still adds the ' print /: How can I get that back to my default command line? * See example below

  Thank you!

  

  sudo scutil --set HostName whatever-you-want

  If it does not, the host name is used for the result of a reverse lookup of your IP address on a local DNS server, very likely your gateway.