print screen does not work after ios10

I use an ipad air... that is not working properly after the last 10 updated ios... im nt could take screenshot right now... anyone... would recognize the answer from someone

You must hold the sleep/wake button to first, then quickly press the Home button.

If you hold down the Home button too long, the screenshot feature will not work.

Tags: iPad

Similar Questions

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • wired keyboard 600 print screen does not work

    System

    Windows XP Professional 32-bit version 2002 Service Pack 3

    Dell Vostro 400

    Intel Core 2 Duo E4500 2.19 Ghz, 3.00 GB Ram

    Since I replaced the original keyboard with Microsoft wired keyboard 600 print screen functions are sporadic at best.  Sometimes Ctrl + PRTSCN works and especially it's not.  Even when Ctrl + print screen does not work I can not copy the active window by using Alt + PRTSCN.   I have a Setup dual monitor at work so that I can have the database, file explorere and opened in a window screen and development in another email.  I tried to download the driver from the Microsoft Web site, but he says that drivers that are installed are later.  (installed on the disc that came with the keyboard)

    Other than to start Microsoft keyboard anyone elese have all the solutions to make it work?

    Hello

    Follow these methods.

    Method 1: Follow these steps to run the keyboard Diagnostics

    (a) start Microsoft Keyboard Diagnostics. To do this,
    Click Start, click run, type mskey in the Open box, and then click OK.

    (b) press several keys to verify that the keys match the keys identified in the MS Key window.

    (c) when you are finished, click exit.

    If you get no response in MS Key on your keyboard, test the keyboard on another computer

    Method 2: You can also use the on-screen keyboard and check if you are able to take screenshot.
    For more information, see this link.
    http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard    

    If the methods above do not help, you can contact the Microsoft Hardware support.
    How to contact Microsoft if you have questions about your hardware device
    http://www.Microsoft.com/hardware/en-us/support/contact-us

  • my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    I downloaded the former driver of windows 7 touchscreen and it worked

  • I have a hp pavilion dv9205us laptop - Alt print screen does not work

    I have a hp pavilion dv9205us laptop - Alt Print screen (single screen) does not work - operating sys is Vista but XP Professional is my Microsoft application - I can Alt scree printing when I have a keyboard plugged in. - but without the HP laptop has only Prt sc (which is the option further down on the personal key) - without the remote keyboard how can you alt info impression of individual office to another doc. ???

    Thank you very much - it worked, and then just to screen individual, you want to without the entire background behind it - Alt / button FN and Prt Sc then allows me to get that. Once again thank you.

  • Touch screen does not work after Windows 8.1 upgading

    I upgraded my HP TouchSmart tm2 notebook Windows 8 tot Windows 8.1. Now my touch screen does not work, when I touch an app. Also my touchpad do not work. There is no problem when I we an external monitor (without touch screen). I received a message that Assistant HP app is not compatible with Windows 8.1. How to solve this problem?

    Unfortunately, there is no support for the applications of the touchscreen or devices to your laptop under Windows 8 or 8.1

    operating systems.

    This is the touchpad for Windows 7 software

    You can try to install mode of compatibility in this solution provided by Member AttackofZaq

  • CarPlay does not work after iOS10

    Hello everyone.

    Until yesterday, I was using carplay with no issues whatsoever with my iPhone on my Peugeot 208 2016 5s. However, today, since the upgrade to iOS10, I simply can't use it. My iPhone displays the following message: "This accessory is not compatible with the iPhone" (I'm using an Apple cable brand, support that my car does not work in mind, with Bluetooth CarPlay), and my car shows "no audio files not found" (it looks that it identifies the iPhone as a USB key, rather than a smartphone).

    Someone at - he heard about such problems? I know that the OS is brand new, but it really bothers me.

    Thanks in advance for anyone who stops to help me.

    I have exactly the same problem. My iphone is a 6s and my car is a Citroen aircross 2017. After that 10 updated ios the carplay do not recognize my iphone. I live in the Brazil and I called the Citroen assistance and they said I have to wait until they update the software of carplay.

  • HPStream x 360 ConvertiblePC 11: touch screen does not work after update of Windows 10

    I updated my computer to Windows 10 but the touch screen no longer works. I've updated the drivers, but there has been no change. Any suggestions?

    Amazing! Problem solved!

    I heard there was a reset function in Windows 10 but I really didn't think he would do anything. The touch screen did not work when I originally did a new install of Windows 10 so why would it now? But he did. My touch screen works well and even better, he deleted loads of disk space.

    To simply type "reset" in the search and recovery option returns to the update & security. 'Start' this PC with Reset and select this option to remove all. After about an hour or two, my computer was fully functional. The downside was having to reinstall applications and files, but is not a major concern.

    Result!

  • print screen does not work with ios 10

    I used to take screenshots by pressing the sleep/wake button and the home button. with ios 10.01, it no longer works. even if I get home before the sleep button sleep. even if I press them together very quickly. It does not work. I tried several times by pressing on quickly. I tried to restart. still does not work.

    Hi laurannso,

    Thanks for the update to iOS 10! I understand that you have problems with taking screenshots with your device. You can try a simple reboot of your iPhone. Restart your iPad, iPhone or iPod touch

    If restarting the device does not resolve the problem, try to save your iPhone restaurant next to the factory settings.

    The backup of your iPhone, iPad and iPod touch

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    These measures should have your screenshots works on your iPhone, as expected. Please use the Apple Support communities to post your question.

    Take care.

  • DVD Player & touch screen does not work after last update DX1210 to Windows 8

    Hello
    I know. I should have checked the upgrade information before doing so, but I have upgraded to Windows 8 about 3 months ago and my DVD player and touchscreen no longer work. I don't know what else does not work.

    I searched drivers but can't seem to find a.

    Can someone point me to the right direction?

    Or do I restore to original settings - Windows 7?

    Which brings me to my second question. How to restore? I did not have a backup, but I left all my data on a hard drive.

    I can't find any help on any of these challenges.

    Thanks in advance.

    To be honest that I n t have this unit and don t have experience with it but I ve checked Toshiba to THE support page and of course, this model is not supported for Win8. What you need are utilities and tools specific to Toshiba.

    In my opinion, if the device is not fully supported you should go back to original Win7 and supported.
    I put t know why you didn t follow the Toshiba s advice on the creation of recovery media. From my experience, that the recorded data are unnecessary, and you will not be able to start the recovery image installation.

    What you need now is the recovery disk. Visit the Toshiba page if there is possibility to order a new. Otherwise contact the closest service Toshiba and ask if they can help you with this.

  • External screen does not work after update of El Capitan

    Hi all

    I hope someone can help out me with this. I have a MBP 2011 (i7, 4 GB ram, 330 M) and since I've updated to El Capitan (now 10.11.2) my external screen no longer works. I use a HDMI Cable MiniPort who worked before the upgrade. I am trying to connect to a 720 p TV and tried to connect it to my 28 '' ASUS monitor 1080 p that I normally use for my Windows desktop. None worked. My MacBook display blinks for a while when I connect it and then nothing. I was not able to connect it to my projector via VGA USB adapter until I've found the last update on the Web site of the adapter, then at least the display has been resolved. I tried the 'View to detect' button in the preferences system, no luck.

    I had the same problems. I installed El Capitan in MacBook Air early 2015. My external monitor is Dell P2314H. After installation, the MacBook Air is no longer detected the monitor, and the monitor does not save any video input to the computer.

    I chatted with Apple Support, but they don't give me satisfactory answers.

    Then I came across this answer on another thread of discussion the similar question:

    Re: El Capitan does not detect my external display

    And the solution that works for me is proving to be as simple as changing the cable. So I stopped using official mini Apple displayport to HDMI/DisplayPort/DVI connector. Instead now I use a cable (mini displayport to displayport in my Dell of MacBook Air) I bought locally (I live in Jakarta, Indonesia). It works like magic.

    I hope this helps you.

  • The mouse works in the login screen does not work after logging in

    I have Asus new laptop with touchpad mouse.  First two weeks worked satisfactory mouse.
    The mouse works now, after booting the computer login screen (i.e. the scrolls of the mouse on the screen and can use the mouse buttons to select the user).  However, once connected, the mouse does not move.  Just it centered in the screen.
    Manager device indcates unit operate properly.
    Thank you!

    The laptop is new, contact Asus.

  • Print screen does not work on my windows 7. Samsung laptop computer. Tried the fn, alt, cont + prt sc

    Can't just 'print screen '. Have to go to paint, home, paste, save, name the file, select jpeg and then save again. Then go to the file and print it. On my old computer

    I just clicked on print screen. Any help out there?

    I'm not 100% clear what you mean - you say that you "click" print screen - where & in what program? Do you mean the print screen on your keyboard key?

    Here's how the print screen button key keyboard should work...

    The Print Screen key does not immediately print on the screen, as the name might make you think - it's a bit wrong to foreground. Instead, it copies the current image of the screen to your Clipboard. You can then paste this image into a program type photo editing (or similar) so that you can edit it or print it from there.

    Another way of the foregoing is by pressing Alt + print screen on your keyboard - it's exactly the same as the above, but the image on the Clipboard is only the active window.

    Please see:

    http://Windows.Microsoft.com/en-GB/Windows7/take-a-screen-capture-print-your-screen

    and,

    http://windows.microsoft.com/en-GB/windows7/Using-Paint .

    If the above does not answer your question please can you explain your problem more clearly so that we can help you.

  • Finger print reader does not work after upgrade to Windows 8 Pro - DM4 2055BR

    I updated my previous Windows 7 to Windows 8 Pro Edition and the Finger Print Reader no longer works. Validity software driver is already installed more simple pass, but when I run the Easy Pass it pops up the message "the drive is not connected, connect the drive.

    I noticed one lot of other posts related to the same issue, but I don't know if the model of my laptop does not support the new version of the operating system.

    I appreciate if someone could help me with this problem.

    Dulao35,

    Welcome to the HP Forum!

    When start you / see: Easy going on?

    You may be running HP SimplePass Version 8.0.0.57 or some other SimplePass 8.x?

    ======================================================================================

    You can run HP SimplePass Version 6.x later on your computer.  You may also be able to get SimplePass version 8.x if you want to stay with this version to work.  It's a personal choice, really - either version should be able to work on Windows 8 Pro.

    Note that the version 8.x SimplePass seems to dislike everyone, but the Internet Explorer browser. This is a personal observation and NOT what can known by other users.  If you use IE, then the point is moot.

    You can probably keep your existing driver of the fingerprint (Validity Sensor in the Device Manager) as long you run the version compatible with Windows 8, illustrated to the webpage of your computer driver:

    HP Pavilion dm4-2055br Entertainment Notebook PC Drivers

    See below for a method that you can use to upgrade HP SimplePass:

    Simple Instructions for upgrade HP SimplePass

    The bits on SimplePass version 8.x are towards the bottom of the file.

    Click on the star of congratulations !

    It's a nice way of saying 'Thank you' for help.

    Although I strive to reflect best practices of HP, I do not work for HP.

  • Full screen does not work after upgrade; OSX hangs

    Immediately after the upgrade later El Capitan in Sierra, full function display has stopped working at the end of a disastrous. Not only can I not enter or exit the mode full screen on any application (Safari, iBooks, Terminal, etc.), but in addition, I can't event begin any application which was mode full screen before upgrade (essentially all other applications that I use on my mac). Nor can I drag-finger-three to any application full screen. OSX just hangs and displays the login screen as it has not started.

    Indeed, my mac is useless now, I can't do anything with it. I tried to restart the PRAM, has tried to repair my disk, tried various 'normal' things, which none worked. Can someone help me with this?

    Hello konkere,.
    Thank you for using communities of Apple Support.

    If I understand your message that after upgrade to macOS Sierra as your MacBook Pro doesn't work well for you. I know how it is important for your MacBook Pro to be in place and functional after the software update. Reset the PRAM and repair the disk are key steps in troubleshooting. I also recommend reinstall macOS Sierra of OS X Recovery.

    How to reinstall OS X

    OS X can be installed on the same version or an earlier version of Mac OS X, without deleting your data. You don't need to remove or disable the existing system first.

    1. Start of OS X Recovery now command-r immediately after start-up or that you restart your Mac. Release the keys when you see the Apple logo. Start-up is finished when you see the OS X Utilities window.
    2. If you do not want to wipe your drive before reinstalling OS X, open utility disk in OS X Utilities window, then use disk utility to erase the drive. Quit disk utility when done.
      Erase the disc is not necessary unless you're your Mac transfer to a new owner, partitioning your drive for use with Boot Camp, or attempt to solve a problem this as disk utility can't repair.
    3. Choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.
      This installs the latest version of Mac OS X, which has already been installed on your Mac.

    Best regards.

Maybe you are looking for