print spooler does not start with error 1068

Similar Questions

• Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

  Hello

  I still have the "system error 1068. The dependency service or group was able to start.

  "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

  I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

  I tried "restart the spooler to print the title of the services, it does not, with the error message above.

  I have check the dependencies and it say HTTP and RPC

  I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

  I went to regedit and found the keys as follows I don't know if its correct:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

  'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

  "Group"="SpoolerGroup."

  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

  00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

  'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" =: 00000002

  'Type' = dword:00000110

  "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

  70,00,00,00,00,00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

  72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

  00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

  69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

  00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

  6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

  "Close" ="PerfClose."

  "Collect"="PerfCollect."

  "Collect Timeout" = dword:000007 d 0

  "Library"="winspool.drv".

  "Object list"="1450".

  "Open" = "PerfOpen."

  "Open Timeout" = dword:00000fa0

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

  "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

  00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

  05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

  20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

  01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

  Any other advice would be greatly appreciated...

  Hello yan_dao69,

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Ideally, this would set the print spooler service issues.

  Method 2:

  I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 3:

  Check the dependency of the spooler services in the registry.

  a. Click Start, type regedit in the search box and press ENTER.

  b. look for, and then click the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  c. right-click on spooler, click Export, save a backup file on your desktop.

  NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

  d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

  e. in the value data box, delete the other keys and then click OK.

  f. exit the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• The printer does not... .print spooler does not start. Error 1068

  My printer was is more "known"... then I went out a bought a new... and it will not work either... yes I know dumb on my part.

  I have windows 8 a I went the print spooler and tried to start... I get the message of 1068 the dependency service or group could not start... I was warned not to get windows 8... HELP!

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: update
  drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

• Under Vista, my printer spooler would not start, get error 1068.

  I have Window Vista on my laptop.  The printer spooler wouldn't start.  I've tried everything.  It says Error 1068.  Help, please.

  Hello

  Try the following steps:

  a. click the Start button, click all programs.
  b. now, click on accessories.
  c. right-click on command prompt and select "Run as Administrator".
  d. type the following command and press ENTER.
  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Print spooler does not start

  I have problems printing due to the fact that the print spooler does not start even after restart pc & try manually in the services, there he gives me error 1053. It is configured to start automatically in the print spooler box, so I don't know.

  Hi Wobblesmf,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it seems that the print spooler does not start.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. what version of Windows are you using?

  2 have had any changes made to the computer before the question?

  Visit the link for the operating system that you use:

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  I have this link which should guide you in the right direction.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The steps mentioned in the link is for Windows 7. You can change the version of the operating system in the same link by clicking on the button beside Windows 7 drop-down and select the one that you use.

  Using the windows-related issues feel free to post on Microsoft Community.

• Windows 7 printer spooler does not start

  just my printer spooler does not start in Windows 7.  I received a message that the spooler wasn't running when I tried to use it today.  I used the printer for a few days. "net start spooler" fails from the administrator command prompt.  I checked that the CPP is running.

  I installed SP 1 yesterday with success, but I went back to the restore point, but still, the spooler does not start.

  The system acts as the spooler is missing.

  How can I solve this problem?

  Thank you

  Jim

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate bridge end RPC Mapper in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Repeat the procedure for DCom server process Launcher.

  It is always sensitive in this situation to achieve a malware check.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.

• Spoolsv.exe - local print spooler does not start

  Dear all

  My local print spooler will not start. After a recent Windows update all my devices when removed, which was a printer. I run the malware and anti spyware software on my PC, remove no matter what malware/spyware, but I can not yet install the printer I have.

  The message I get is "Windows cannot add a printer. The spools of local printer service is not running. Please restart the spooler or restart the machine. I tried to restart the spooler but this does not work, I get an error 1068. I rebooted the machine several times; all to nothing does not. The 'service' shows 2 HTTP and RPC dependencies. My understanding is that the only dependency should be the PRC, but I can't change the file. Short to restore PC to factory settings and start all over again, I'm lost. Is there anything else I can try before taking this reconstruction?

  Your

  Doug

  At a prompt (run as administrator), run the following:

  dependent on the spooler of sc config = RPCSS

  Note the space between = and RPCSS.

  This removes any dependencies on the spooler and restore the default RPCSS dependence.

  One of the problems with viruses and malware is that there is no real way to know what exactly it is they changed on your system, the more benign virus may be easy to remove but never pests morphing and a constant flow of new pests pushed one never knows how a machine is compromised.  After the withdrawal of an infection, you should always ask yourself if you can really trust the machine, if you don't know if the answer is no, the only course of action is to flatten and rebuild the machine.   Disk imaging/cloning utilities are perfect for this, they can help you get your machine running in a minimum of time and upward.

  John

• Print spooler does not start error 1053

  I have Windows 7 64 bit and the printer has always worked fine until a week ago.  I now have a pop-up message that says "I need to select a printer.  And if I need to install a printer, click Add printer, or find... ».  I click on the printer to find and it is empty.

  I searched the forum for Microsoft and tried the following solutions:

  -I went to Services, checked to see if the CPP is automatic and works.  This is the case.  Then I checked Spoolvs and it is also automatic but not running.  I click on 'Start', but I get an error message 1053 "service did not demand launch or timely control.

  -Command prompt to check all corrupted files.  The results are all ok.

  -Network > the sharing advanced setting > under home or work > under homegroup connections, I ticked the box "user accounts and passwords.  then restart.  The printer has worked for only 2 tests.

  -Leva 'Windows Update' and nothing is needed.

  -A ran a virus scan and everything is fine.

  -Wanted "Event Viewer" > error > Printing Service, the results only with error 2114 «print spooler could not share Canon ink jet with the name of the shared resource in ink jet Canon...» ».

  Hello

  It is not irreparable, but it takes a bit of knowledge. Try the methods that to
  once. As I said seek help from a family member, a friend or a real computer store.

  If you start up and down if you think you can perform these tasks
  even if you don't understand them.

  Make a Restore Point before you start, you can return to where you were like that
  If necessary. (Although to be honest, a serious mistake made by those who is unlikely even if you)
  make a mistake).

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 1053 error print spooler does not start

  Hi I have a HP Photosmart C4783 and all of a sudden, I can't print more.

  I tried to restart the coil, but it's just for me that error 1053 and some blah on demand does not in a timely fashion.

  I went into System 32 to ensure that spool.exe is still there and it is.

  I am running windows 7 64 bit and all updates, including the printer are up-to-date.

  Everything was fine until a few days ago and I have no new hardware or software installed.

  It's really boring it would be great if someone has an answer that does not include trawl by a thousand other items that suggest the reboot of the coil.

  Thank you guys.

  If you get error 1053 when print spooler starts, it is usually a problem with the operating system itself.  However, I have something I would like you to try as a way to get the spooler to start.

  • Open the command run by selecting it from the start menu or by pressing the Windows key (to the left of the alt) + R
  
  
  • Type services.msc and press enter
  
  
  • Scroll down and double click on print spooler
  
  
  • Select the tab log
  
  
  • Uncheck the Allow service to interact with desktop
  
  
  • Click apply
  
  
  • Select the general tab for the print spooler, and then select start

  This becomes the print spooler to start successfully?

• Printer spooler does not start

  I spent hours on the phone with Kodak tries to install my new all in one printer that is compatible with Vista, but we cannot get installed it.

  I think it's maybe because I can't start my printer spooler.  It is set to automatic, but the status is empty.  When I try to right click to start manually, I get an error 1068: the dependency service or group could start.

  Can someone help with this problem?

  What the HTTP service. Is it does not work?
   
  See if this procedure is useful.
  http://www.Winhelponline.com/articles/9/1/error-1068-the-dependency-service-or-group-failed-to-start-when-starting-the-spooler-service.html
   
  This is for XP. For Vista, the value is a Reg_Multi_SZ of RPCSS and HTTP. He
  shows in my regedit, when you change the value, on lines separate.
   
  --
  ..
  --
  "InsanityDesired" wrote in message
  News: 625abbc4-9ce9-4ced-8a54-b53999f061a9...
  > I get error when I click Start in the right click menu.
  >
  >
  >
  > I checked that my CPP and my DCOM are both set to automatic and the
  > status is started on both.
  >
   
   

• Windows does not start with error - PXE - E53: no boot file name given

  I have a PC HP P6010in at home, but for 3 days while turning on the PC, I get the error PXE - E53: no boot not received and after that the wndows file name 7 I installed does not turn. Even the advanced startup options do not come.

  Please help solve the problem.

  Thanks in advance

  Hello

  This error comes if the operating system or any boot device is not at the start of the network, where the system tries to boot from the network or Boot Rom. seems the BIOS setting is lost. To solve the problem. Enter the BIOS by pressing F10 or F1 and reach the start (on the top with the right arrow key) tab. In the Startup tab, there should be an option related to the priority of the device, select first boot as drive boot HARD settigs, and then save by pressing F10, select Yes for confirmation.

  Now a PC will reboot and hope that the windows starts.

  Good luck

• Visual Studio 2010 on Windows 7 64 bit does not start with error 0xc000007b Application

  Charge installation of Visual Studio 2010 Professional on Windows 7 64 bit
  Picked up SP1 before you run the first time.

  Running fails with:
  ---------------------------
  devenv.exe - Application error
  ---------------------------
  The application was unable to start correctly (0xc000007b). Click OK to close the application.
  ---------------------------
  Ok
  ---------------------------

  The Dependency Walker tool lists the following messages:
  Error: at least a module has an import unresolved due to a missing in an implicitly dependent module export function.
  Error: Modules with different CPU types have been found.
  WARNING: at least a delay load dependency module was not found.
  WARNING: at least a module has an import unresolved due to an export feature missing in a dependent module of lazy loading.

  There are two 64-bit dll that is referenced:
  IESHIMS. DLL and MSVCR100. DLL

  I can copy MSVCR100. DLL from C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger\x86 in C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE (next to devenv.exe) and I get the splash screen.  However, before the same load completely blocks.  Added an IESHIMS to 32-bit. DLL of C:\Windows\winsxs does not solve the startup crash problem.

  Not quite sure what else to try, any advice would be great.

  Hello

  For assistance on this issue, you can ask your question here:

  Installation and configuration of visual Studio

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

• Explorer.exe does not start with error 142

  Explorer.exe opens in safe mode but not in normal mode. When I force it to start using the task (from the Task Manager) I get the error "the application could not start correctly (0xc0000142). Click OK to close the application. "

  What is the cause of an error in 142?

  Hi Michael,

  Thanks for the reply.

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If any virus or malware files are detected during the scan, there is a risk of data loss because infected files will be deleted.
   

  Also check if there are errors listed in Event Viewer.

  Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.

  To open the journals please follow the steps.

  Press the Windows key + W

  Type 'view event logs"on the splash screen and press enter.

  Hope this information helps. REP [having status so that we can help you.

• Computer Dell laptop does not start with error: 0xc000021a in windows 8 pro with media center...

  I have dell laptop computer (windows 8 pro with little Media Center x 64) ##genune, not cracked or pirated... #.

  It worked fine until the evening yesteday and I was playing Holy 4th place after closing, I noticed that the battery is about to happen at 10% so I did it just to sleep for awhile cauz I haven't had none running around the House... shortly after came current I just picked up my cell phone, but suddenly I saw an error message indicating that "your laptop computer encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100 % Complete) If you want to know more, you can search online for this error: 0xc000021a "and there is no changing the screen as I waited for 3 hours now... I never had an error like this... pls hlp me...

  Hello

  Are which country you located?

  Dell has wide global support. I suggest you to select the country where you are and check if you can get the recovery DVDs.
  http://www.Dell.com/support/contents/us/en/19/category/contact-information

• 1053 error Code Print spooler could not start

  My print spooler does not start and I get the error code 1053

  Hi troy,

  I've personally encountered this error and had to reinstall my system, but try this:

  • Simultaneously press the keys Ctrl + Win and should bring up a run dialog box
  • Type C:\System32\Spool\Printers in the Run dialog box and a windows Explorer should appear
  • In the folder, delete all the files in the folder

  This will delete the documents you have sent to the printer. Then, you start the "Print spooler" service in this way:

  • Simultaneously press the keys Ctrl + Win and should bring up a run dialog box
  • Type net start "print spooler".

  Try this and let me know how it goes.