Print usb hand ready AP

Similar Questions

• Epson TX600FW "printer is not ready."

  I just new Epson Stylus Office TX600FW. Have installed the disc that came with the device. Tried to test the printing, BUT get a small window titled 'Epson Printer Status Monitor 3 "with the message - 'printer is not ready to print'. And he adds "check all connections and make sure all devices are on." To cancel printing, click the [Cancel] button. "And it also shows"Ink levels"and ink icons that all seem to be grey, however, already installed new cartridges Epson genuine - that present as being full when checked in the Epson device information panel.

  Have also tried to reinstall the driver from the Epson site download - all still does not.

  Hi Dianne,

  This behavior can occur because of corrupt drivers, incompatible drivers, if the print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  What version of OS are you using?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Note: Try all the steps except the resolution of problems.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I want to print to a printer usb from a Dos program

  I want to print to a printer usb from a Dos program

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e1112bf8-2373-417b-AC00-3ac7061aa6eb

  See if the information above helps you.

  See you soon.

  Mick Murphy - Microsoft partner

• error "local printer spooler service does not work." any attempt to add a local printer (USB or Bluetooth) fails.

  I can't add a printer (USB or Bluetooth), because it always returns a printer spooler error. I tried to restart the print spooler and by ensuring that this "local system account" and "allow service to interact with desktop" is selected. I also deleted all the old printer drivers, rebooted, checked the RPC Locator is active and tried everything I can think of. It worked well in Vista x 64 on the same machine later than yesterday, but the upgrade to Windows 7 x 64 seems to have something broken. The printer, a HP C5500 series, works very well on a virtual machine that is running the same operating system. (I rather not have to run a virtual machine just to print, of course.) Running RTM x 64 on a Dell XPS M1530, which very well printed Vista, just before upgrading, to Win7. Suggestions?

  FINALLY, I SOLVED THE PROBLEM! Probably, this will not help too other people unless they too, are start several operating systems and VMware Tools running, but I figured out how to fix it on my system without having to reinstall Windows. In fact, it was caused by an instance of VMware Tools. I removed, rebooted and voila - I was able to print again. In an effort to help a few other people, here is a summary of the things I've tried while working through the countless possibilities. If you are having problems "print spooler cannot start", one of these might help.

  (1) after having in vain attempted to restart the print spooler service and by checking all its dependencies, I deleted all the registry entries and drivers as detailed here: http://support.microsoft.com/kb/324757.
  (2) I rebooted in safe mode and check the C:\Windows\System32\spool\ folder for all the corrupted files or remnants of coil.
  (3) I moved all the drivers printer in C:\Windows\System32\spool\x64 (or \w32x86 if you are using a 32-bit operating system) to a temporary folder. While examining the dll, I became suspicious of some "ThinPrint" drivers by VMware.
  (4) I tried to replace with a known good copy spoolsv.exe. (To do this, you need to take ownership of the file. Search engines are your friend.)
  (5) I tried to use RegEdit to reconfigure the default http RPCSS indicated in the "DependOnService" value This and all the other steps I mention in this list, are described in great detail in the links provided in my Nov 11 message.
  (6) I tried system restore back as far as possible - who had the positive effect of the side to undo these unsuccessful efforts in this case. Unfortunately, the problem persisted, due to the limited number of available on my system restore points.
  (7) following up on top of my suspicion earlier, I removed VMware Workstation and restarted. The problem persisted after a reboot.
  (8) I then started in the other OS on my system and removed the VMware tools he had installed on my boot drive, then restarted.

  Bingo! Printers reappeared and everything worked properly. Then, I was able to reinstall VMware Workstation without breaking anything. Phew!

• The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  Hi Jack,

  Thanks for the reply.
   
  See Web Gateway site to update the chipset and BIOS drivers.
   
  Gateway support link.

  http://support.gateway.com/product/default.aspx?modelId=2375

   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• Printer USB Mode XP

  How can I see my printer USB on XP MODE

  PRBaucutt wrote:

  How to make / see my printer USB on XP MODE.

  (1) install the printer in Windows 7.

  (2) in Windows XP Mode, click on USB and "Attach" her pinter listed USB. You may need to install drivers for devices specific to Windows XP for it.

  Bruce Chambers

  Help us help you:

  http://support.Microsoft.com/kb/555375
  http://www.officeforlawyers.com/howask.htm
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  They who can give up liberty to obtain a little temporary safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

• Message error "printer is not ready."

  "I get a message" printer is not ready ' when printing 'Adobe PDF '. Changed many settings, without success. Occurs when you print from Internet Explorer, MS Outlook and MS Word. Any way to print a file in format PDF in Adobe Acrobat?

  Have you tried printing to the printer file. The result will be a PS file (probably with a PRN). Open the file in Distiller. If you do, then look for the AcroTray running in the background. It is a necessary part of the printing process, unless you like to take additional measures that I have just mentioned.

• If my printer USB cable is connected, my computer won't start?

  If the printer is on and the USB port connected.  The computer won't start.  If I turn on the laptop with the USB plugged in and as it starts and then turn on the printer, everything works fine.  Almost ok.  I think I should be able to leave the printer on all the time as I do at work.  Then when I start the computer, the printer is ready.  Every other printer I've ever had worked this way.  Any suggestions?

  Maybe the printer looks like a hard drive (some printers have card readers that make them look like a disk) and the computer attempts to boot from the USB drive instead of the hard drive?  It would be a modification of the settings in the BIOS

  'Teething problems of a PC with a connected external USB drive.
    <>http://wdc.custhelp.com/app/answers/detail/A_ID/1201/~/problems-booting-a-PC-with-an-external-USB-drive-connected>

  Another article I found...  Not sure I can add much further than.

  "USB device does not initialize at startup or Windows XP no longer meets the start or stop"
    <>http://support.Microsoft.com/kb/830957 >

  HTH,
  JW

• MFP M277: Cannot install printer (USB)

  I try to install the new MFP M277 peripheral to a desktop via a USB connection. I tried different ports, tried to restart, tried several times, turned off the FW and AV - without success. HP Print and Scan doctor does not see the printer no matter what I do.

  The installer runs for 20 minutes and then "expire" with the following message is displayed:

  

  The printer is however visible under devices and printers, but not under printers:

  

  If I try to manually install the driver for the device from the CD, I get this:

  

  Any ideas?

  Welcome to the HP community @JohnTrd,

  I noticed your post on the "fatal error" you see during the installation of your LaserJet M277 on your Windows 7 system, and I wanted to tender hand.

  If please try a clean boot, restart the PC and run the installation again to see if it works: How to perform a boot in Windows

  Here is the link for drivers and downloads for the LJ M277dw: HP Color LaserJet Pro M277dw MFP

  Let me know what happens!

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• Printer USB problem. Help, please

  Hi all
  My Win XP SP3 suddenly developed an error when I try to print: failure of the Document to print - communication error with the printer.
  Canaon printer - Pixma MP 610 - is 6 months old who until then worked very well.
  Panel displays printer as Offline as a default state. Right click and selecting put printer online do so much and then it is listed as ready but still does not print.
  The following does not help:
  Printer off/on switching voltage
  Unplugging and reconnecting USB cable windows says new hardware detected but it it lists as material not recognized. Try to install the driver of the .inf - windows says no driver found which is compatible with this unit.
  Restart the computer
  unintalling / reinstall drivers - printer is listed but grayed out as default in offline mode.
  does not print BACK or any Notepad program Inc.
  Went and bought the new printer and new wasted money - same problem - hardware not recognized - USB cable.
  Printers are good and works very well when it is connected to the other comps.
  Tried the fix to MS site http://hotfixv4.microsoft.com/Windows%20XP/sp3/Fix144808/2600/free/226205_ENU_i386_zip.exe) - no help.
  In manager\hardware - listed as device not recognized - printer device refuses to update driver as said earlier, even through the .inf file
  In the printer properties verified that USB is not going into sleep mode - without help.
  Activated: Services\PrintSpooler - Running - restart - no help.
  Edited register: 'Create a new registry value that prevents an OHCI controller to enter a suspended state' - help
  ALSO; computer does not recognize now of any memory stick when connected USB
  USB only sees the mouse and a card reader.
  All USB hubs are listed as working normally in yellow device manager-no icons anywhere Device Manager.
  All windows update drivers are up to date.
  Help me please if you can I am at my wits end.
  Thank you United Nations advance regards
  Bayan

  Bayan,
  Hi, the same thing happened to me last Friday, 20 November.

  the differences are:-
  1. I use HP 7590 printer;  and
  2. the poster as "Unknown device" and that no driver usb device is loaded...

  You solved the problem?
  Thank you
  Ursula

  JohnKelly46 had the answer - he said to unplug the computer's power supply. He said you have to unplug the notch decision-making and wall. [just turns off the computer is not enough.  Wait a few minutes. Then, connect the power supply to the computer.  Once windows started, everything reinstalled one by one.

  ... see pls detailed response from John to wire "USB drive is not accessible"

• Install a printer LPT1 HP LaserJet 4 L printer USB port in Windows 7

  Before this "incident", I was able to print from my HP LaserJet 4 L (LPT1 to USB) printer.  I still have the correct driver.

  I was forced to do a clean install of Windows 7 Ultimate and lost the ability to print from my LaserJet.  Windows only allows you to install it as a USB printer, but stop there in recognition.  I need to go beyond that point.

  It was working before and I know it can work again.  I just need help to get there.

  Hello

  I realize has the inconvenience that you are experiencing with the impression. I will certainly help you to question.

  Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  I suggest you check the steps mentioned below:

  Method 1:

  Run Troubleshooter printer and check if this can help:

  Open the printer Troubleshooter

  Method 2:

  Restart the Printer Spooler service and check if that helps.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform these steps.

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2:

  See the link below and check if it helps:

  Diagnose and automatically fix problems printing and printer

  For more information, you can also check out the link below:

  Solve printer problems

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• printing on printer USB connected to TimeCapsule

  I have a USB printer connected to TimeCapsule.

  My iMac and two laptops can discover and print wireless through the TimeCapsule.

  None of my iOS devices can discover the printer even thought they are on the same network.

  What should I do to get the iPad to see the printer is connected to the TimeCapsule?

  iOS devices do work that with AirPrint, not any printer wifi.

  On AirPrint - Apple Support

• Toshiba e-studio 206 does not print USB cable

  Hello! We have Toshiba e studio 206 which is installed with the usb cable.
  Official drivers for e-studio 206 granted official website (here and later - a Russian) had been installed without error, the device shows any errors as well and can be used as a copier or even scan via the usb cable.
  But when I try to print at least a test page - an error in the spooler window.

  Install the drivers, the printer as a COM-device. I read on the official website that this is normal.

  If Windows 7 (32 bit) - in the window 'Printers and devices' there is the printer itself AND a strange unknown device called TOSHIBA e Studio 206 (COM3).
  On Windows XP, it is all of the same except there is not that strange device.

  I'm sorry if I posted in the wrong forum, but given that this thing is a copier at the top (or so I think...) ...

  P.S:I tried using different USB cable - no effect. I guess, I'll try another while you wait for your kind answerrs... Thank you!

  Hello

  Have you installed other printers or drivers next to Toshiba e-studio? If Yes please try to remove them and test it again.

  In addition, I would recommend to reinstall the drivers for the e-studio again. Delete the current version and restart the computer. Then install the latest version you can find on the page of Toshiba.

• My PC will not be recognized my printer USB cable

  Hello, my Pc does not recognize a USB drive, I use HP Deskjet F2480, and my PC is Windows 7 32-bit

  It was working before but now after I connect the USB I can't print and scan because that my printer is disconnected or offline. I tried uninstalling and reinstalling but still impossible acknowledged the USB.

  Leahm0709,

  I'm sorry you have a problem with your PC recognizes is not the installation of the printer. I would follow this document to try to resolve the problem.

  http://support.HP.com/us-en/document/c02266743

  Let me know if it helps

• Not printing - USB attached deskjet 720c, made an error in HPVSCP50. DLL

  I see many questions like mine, but try to reinstall the drivers for WIN 7 64 Bit OS does not seem to work.  I went as far as the deletion of the HP dll and INI of C:\windows\system32\spool\DRIVERS\x64\3 files that have a date of May 2008.   Add new printer only get of me that these same PGE back.  My impression seems to work, goes to the spooler for device, shows on Quebec for a short period of time and can be deleted.  The journal of the err shows err:

  Log name: Application
  Source: Application error
  Date: 10/01/2013 09:26:58
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: John-PC
  Description:
  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  Name of the failed module: HPVSCP50. DLL, version: 1.0.0.6, time stamp: 0x4431bcd4
  Exception code: 0xc0000005
  Offset: 0x0000000000010af7
  ID of the process failed: 0x1bb4
  Start time of application vulnerabilities: 0x01cdef46b1720d89
  The failing application path: C:\windows\Explorer.EXE
  Path of the failing module: C:\windows\system32\spool\DRIVERS\x64\3\HPVSCP50. DLL
  Report ID: 2b8f5d99-5b3a-11e2-86d9-00266c264c16
  The event XML:
  "< event xmlns ="http://schemas.microsoft.com/win/2004/08/events/event">."

  I see other people having this problem but I can't seem to get the printer going on the new USB port on a new computer laptop.

  I don't connect when you said that a few post back as your printer is connected using a parallel to USB cable. Now that I have a better understanding of this aspect, I can tell you that it may not work again. Unfortunately, the type of connection that uses the printer is very outdated and is no longer supported because of the potential problems that may result. I'm willing to bet that the issue of installation does not deal with the laptop itself, but the laptop cannot communicate with the printer without communication problems.
  
  My honest suggestion is to check out some of the more recent deskjets or small officejets and see what we have available to replace this unit. Much product HP printers are now improved print quality, ink longevity and increased functionality (wireless, scanning, etc.).
  
  I hope I have shed some more on the issue.
  
  Let me know and have a great day!