Print yesterday, scanned today and now D110a Photosmart will not print
Yesterday, we printed documents using our printer Photosmart D110a. A OK. Today, we scanned documents using the same printer. A OK. Now we try to print again and just empty pages are coming soon. No idea what Miss them us? We have a PowerBook G4 (OS X 10.5.8) and Intel Core 2 Duo MacBook (OS X 10.6.8).) We print wireless. We tried to print different documents using two computers. Nothing but blank pages. I cleaned the print heads and test print came out very well, so there is a lot of ink. I can scan an image and then print that. We cannot just simply print documents. Any ideas, please? Thank you
Thanks for your reply. In fact I ended up calling technical support. It's a defective black cartridge. Once I replaced it worked fine. Thanks again.
Tags: HP Printers
Similar Questions
-
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
=================================
If it is a recent issue, of what it may be worth trying
do a restore of the system at a time before everything started.See the following article:
(306084) how to restore Windows XP to a
previous state
http://support.Microsoft.com/?kbid=306084 -
Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!
Hi ipitedafoo,
You can check if this article helps.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
See also:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
-
My computer turns off during an update to windows xp and now windows xp will not load.
My computer turns off during an update to windows xp and now windows xp will not load. It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options. I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive. I have the product key, but I don't know where or how repair the operating system.
Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.
-
I received an update on your part 10/11/10 and now my laptop will not boot in place! I need help.
Hi bobbymh,
-Do you happen to remember the update has been installed?
-You receive an error message when you try to start the computer?
Follow the steps below:
Method 1:
Try to start the computer using the last good known Configuration and check if you can successfully start.
For instructions, see How to start your computer by using last good Configuration known as Windows XP .
Method 2:
Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.
See to run the system in safe mode restore
See also How to restore Windows XP to a previous state
Method 3:
Follow the steps listed in the following article:
How to fix a computer that does not start
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I used imesh to download my music, I reinstalled windows and loaded my music back and now that they will not play. He asks me to require a license
Hello
1. on what application you are unable to read the music file?
If you use Windows Media Player, I suggest that you follow the steps in this article and the Coachman.
-
Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Hey Brian39
If you change the motherboard that you normally have to reinstall vista
your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.
and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer
If a retail license, you can change the motherboard
but you will normally always reinstall vista for reasons
Walter, the time zone traveller
-
Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all." I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken. I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol
Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop. The missing module is not Adobe software.
-
I use Thunderbird for many years with several accounts of e-mail with little trouble. Yesterday, I received the notice that an 24.4.0 update was available and I did this update. Immediately after, I started having trouble with my email. All but one account could receive emails and when I tried to "Get Mail", the status bar at the bottom of the screen indicates "skewered to pop - server.woh.rr.com.... "and the green progress on the right bar is almost entirely green for at least 60 seconds, then goes with no new emails and no error message. When sending, the situation is similar, except that after a period of time, I get the error message "failed to send the message.
The message could not be sent because the connection to the server of SMTP smtp - server.woh.rr.com expired. Try again or contact your network administrator. "It is for accounts that worked perfectly before the update and without configuration changes have been made. I also downloaded a file of installation stand alone for 24.4.0 and reinstalled without result. Obviously a bug in 24.4.0.I installed a lot of windows updates and now it seems fine. Do not understand, but it's all good now.
-
I have re-installed fireforx and now my sync will not work
I have re-installed firefox on my computer, and now used to sync my ipod to the top. I log on my ipod and now I can't go back. I would like to cancel the ACCT of sync., so I can start again. How do I do that
Thank you, [email protected]
Visit https://account.services.mozilla.com/ and log in to your sync account
Now, simply click the button Delete your account -
I recently downloaded an update for itunes and now my iphone will not fit on my pc
I recently downloaded an upgrade to my pc and my iPhone. Now when I plug my phone into my pc, my phone will not show up and I'm unable to transfer playlists to my phone.
Hello bigdaddyjohn,
Thank you for using communities Support from Apple!
I understand that after a recent update on your computer, your iPhone is no longer recognized in iTunes. To move forward and resolve this situation, I recommend reading over and working through the steps in the following article.
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
See you soon!
-
I have an old computer that I was not really to help and now I would use it for my son for doing homework, typing and some internet research. I'm trying to update as much as possible. I can only turn the computer in safe mode after I installled XP SP3. Any suggestions?
How to remove Windows XP Service Pack 3 from your computer
http://support.Microsoft.com/kb/950249then
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389Release notes for Windows XP Service Pack 3
http://support.Microsoft.com/kb/936929The space of hard disk required for Windows XP Service Pack 3
http://support.Microsoft.com/kb/947311 -
I tried to close some startup programs in msconfig and key to start diagnosis and now my computer don't return to normal startup,
Try this:
Start | Run | Msconfig | OK | Law tab
Select Normal startup
Click on apply and OK.
Reset.
For later use, there are methods generally better than using msconfig to prevent programs from running automatically at startup. Generally it is best to run the actual program and then enter the preferences to do this.
-
I updated adobe and now windows vista will not come to the top!
I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all. I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.
Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X. Then try to restart normally.
-
I have a Dell Inspiron 1501 which has been offline for over a year and now will not update Vista install. The security updates, 90% will be installed, but all others fail. Contact Dell or Microsoft?
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
LabVIEW and Perforce branching
Hello I want to use Perforce branching with LabVIEW development capabilities. It seems quite difficult (if possible). Anyone have experience on this feature? with thanks a lot Philippe
-
Emails can be sent, but they are not received by the people they are sent to.
people don't get do not email people do not receive my emails even if they do evidence sent and do not stay in my Outbox - why this
-
Dear Sir / Madam,. I recently bought a Linksys amplifier, in order to improve my network speed. I have a lenovo tablet laptop without a cd drive, so I downloaded setup of your site (version 3), but I get an error every time after about 90%. I have an
-
Slow startup after installing Windows updates
Recently I started to use internet on my laptop. After a few days my windows 7 started to take about 15-20 min to start and reach the Welcome screen. When I went to the dell store they told me to complete updates failed, who were many in number and o
-
Notification of widget and banner
Is it possible to use a notification at the top of the screen (banner) in the same way as e-mail counters, facebook etc, from a widget? If so, is there an API and sample code? Thank you