Printe all-in-one Deskjet 3520: cannot reconnect my printer all-in-one Deskjet 3520 wireless network

Similar Questions

• I have to install the printer software complete on all 3 computers on my wireless network

  Range of printers all-in-one color Laser HP CM1312 (USB connected to the Dell desktop computer) Windows XP - 32 bit

  HP Deskjet F4280 all-in in color printer (USB connection for HP Desktop) Vista

  Dell Windows XP 32-bit laptop

  all computers connected wireless to my network

  printers appear on all three computers, but will not print documents on the Deskjet F4280 printer?  Even the office connected directly to the F4280!

  Do I need to install the complete set of the software of the printer to the printer on EACH computer, or the device software to connect to each workstation?

  Hello

  To get all the features of each printer, you must install drivers and applications of EACH printer on EACH machine except when configuration allow pinters to join the wireless network

  Kind regards.

• OfficeJet Pro 8500 a: printer no longer works after reset wireless network

  OfficeJet Pro 8500 has, MacBook Pro, running the Mavericks.

  For 3 days, when we added a password and blocked our router wireless (modem ATT UVerse), our printer is "offline" print jobs queued, but do not print.  When I go and check it says "printer offline".  Or in the print queue, it is something like "looking for printer."

  He worked briefly when we found a power cord and plugged into the laptop, but will not work wireless, which he did before.    No changes except to repeat password for the network.

  I have the manual and you have turned off everything, then return in the order recommended (router, printer, then laptop).  Always offline.   Can someone please?   Thank you!

  Hello @LindaGrace,

  Welcome to the Forums of HP Support!

  I understand that since to add a password to your wireless router your HP Officejet Pro 8500 has e-All-in-One Printer not communicate wirelessly with your computer Mac OS X 10.9. I would like to help you today with this problem of wireless communication.

  Now, make a change to your network, as an addition to a password or change a password, translates into having to reconfigure your printer on the wireless network. At this point your printer is to be 'blocked' access to your network wireless because of the change you made. To correct this problem, you simply raise the Setup wireless for your printer to "say" the printer network name and password. Once the wireless installation runs successfully all will continue to work for you according to the normal.

  To run the Wireless Setup Wizard on your printer, please follow the steps below.

  1. On the touch screen of the printer, press the right arrow key () to display the second navigation screen.
  2. Press network () to open the network Menu.
  3. Touch Wireless.
  4. Press the Wireless Setup Wizard, and then press continue.
  5. Please wait while the printer is looking for the routers that are nearby. Appears in the menu Select Network (SSID) .
  6. Scroll the list of network names until you find the name of your network.
  7. Tap the name of your network.
  8. If you are prompted, enter the WEP or WPA key. This is the password for your wireless network. The password is case-sensitive.
  9. Wait for the printer to connect to the network

  -Source

  Once your printer is connected to your network again, please try to print. If printing still fails, you need to add the printer to your Mac because of the connection of network new printers. Please follow the steps below to add the printer to the Mac.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scanand then check if the name of your printer appears in the printer list.

  3. If your printer is already listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the minus sign (), and then delete the printer

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer

  5. click Add to add the printer to the list.

  Now that the printer is properly configured on your network and added to the Mac, please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• New wireless printer will not see my router wireless/network

  I have checked the other posts, but their issues are a little different from mine.  I just bought a new wireless printer.  I got Samsung remote in, and no matter what they or I did, nothing worked.  We have installed drivers & everything, and my wireless network will not be displayed in the list of available networks.  I have my router sitting 2 feet of the printer & my laptop.  I know it works because I use my wireless laptop at the same time.  We tried to enter the settings manually & automatically & my network will not be displayed.  I use Windows 7 with the Avira software with an active firewall on my home network.   I have tried for a week now and I'm ready to return the printer.  Help, please.  Here are the parameters that you can request.  The only thing I can think is that I asked to be assigned and IP address because I do not know how to get the real.  Thanks in advance

  Manual settings entered: (from my home network properties in Control Panel)

  (the exact name of my network)

  Security type: no authentication (open)

  encryption type: WEP (even if the drop-down list in the printer software makes me choose wep64 or 32

  Security: wep

  security key: (I get)

  key index: 1

  To get it back to where I needed either from me has it taken about 2 months - reinstall all the programs, implemented my toolbars desktop, special etc. It's a chore because I do transcription work and have several versions of Office & I need to do something special for the transplants I don't get this error message because I have more than one version, etc.

  If you can afford it (not very expensive), buy an external USB drive enclosure and a hard drive at least as large as your installed hard drive.  Once you get your system as you wish, create a complete image of the disk and save it to the external hard drive.  Sometimes, if you buy a player and a box together, software disk imaging and cloning is included.  Otherwise, there is some disc perfectly adequate cloning/imaging programs available.

  If you get a large enough external drive, you can use it to make an image of such system which just after getting properly put things in place and make then one or more periodic images to use as backups.

  If you clone rather than image, then you can just swap the current drive for the clone.  It is more useful as a backup in case your installation disc breaks down.  As a general rule, images can be restored from the backup disk or from the software installed on your computer or by using a CD bootable you create using the same backup software.

  I highly recommend you get one of the following options (or any other similar software you can find) and make backups.

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  XXClone

  Macrium Reflect free

• F4580, printer: unable to connect F4580 to wireless network after the upgrade of Virgin Media nowhub

  My printer HP F4580 was connected to my network without wire from Virgin Media Superhub. Then I upgraded to the latest Supehub2 of VM (150 MB/s) but the printer does not now connect. We have 2 Macbooks that connect ok for the SSID of 5 Ghz and a cell phone that connects ok for the SSID of 2.4 Ghz. The printer is WPS enabled and therefore the network. I tried to add the printer to the network using the two WPS push and entering the PIN for Client in the VM Supehub Wireless Manager, but neither work. When I get the F4580 to print the wireless network test report prints a WPS PIN and details for the VM in 2.4 GHz network (auth WPS - PSK, AES/TKIP encryption) sees it. The report includes the SSID for my previous network in the configuration summary. I don't seem to have another way to connect elsewhere WPS push or PIN customer WPS.

  In Manager machine virtual Supehub mode wireless 2.4 GHz network is defined as up to 144 Mbs, but it makes no difference if I put it up to 54 Mbit / s. The Security Mode is set to Auto WP, it makes no difference if I put it to WPA2-PSK (AES).  WPS is activated, and push the WPS button on the Supehub flashes when I use WP Push or enter the PIN code of the customer. In both cases, the I pressed the F4580 wireless button so that the indicator wirelss light flashes then than the VM, push the button flashes. Can anyone help?

  I solved the problem of (re-) install the printer on a Windows PC on the same network, using the CD for the printer. The installation allowed me to select the network, and set up the printer for wireless use.

• Cannot connect Win 7 Ultimate to my secure WPA2 wireless network

  Any suggestions for how to connect to a wireless network secure n.   Currently running Win 7 Ultimate 64 bit and cannot get the sysytem works correctly?

  Hello

  Maybe this can help
  

  There is an inherent Catch22 to attempt to repair a computer wireless through wireless. Given that the without wire is not connected to the source, there is no interaction between the wireless source and the Wireless Client and no frame of reference to find what works and what does not.

  As a first step, I will temporarily move the computer to a place close to the wireless router and plug with a wire.

  When he works with a wire, switch Off the Wireless Security in the router, disconnect the wire and try to make wireless work. This must be done when the computer is always close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• ENVY 4520: printer will not connect to the wireless network

  with wireless on Printer Setup Wizard, printer detects the network but when I enter the key to encryption (correctly), he comes back with a message "Unable to connect to the network".  The printed report suggests the address filtering MAC can be activated.  But I checked and it is specifically DISABLED.    The printed report indicates a FAILURE on "no filtering."

  Please notify.

  After struggling with this for two days and after the announcement of this question and all by downloading the HP doctor, I noticed that the printer had suddenly cured himself. I'm not sure what I should credit this miraculous healing. Thank you I guess?

• HP Deskjet 3520: Wireless connection

  Recently, I changed my wifi network in my house and found that the printer cannot connect or recognize the new wifi network. I tried the reset of the printer to its default settings and turning the router and the printer power off and power on. I do not have a USB however, so this isn't an option for me.
  I am extremely confused with the way the printer is supposed to identify the wireless network and how I'm supposed to connect to another or where I'm supposed to type the password for the network.

  Any help gratefully received.

  Hi @Jillianne16,

  Welcome to the HP Forums!

  I noticed that you can not connect your HP Deskjet 3520 to your new wireless network. I'm happy to help you with this problem of connection!

  A few questions for you:

  1. What operating system do you use? If you do not know the operating system you are using, please visit this site. Whatsmyos.
  2. You are able to print a test page with your printer? Video: print a Test Page-HP Deskjet 3520 e-all-in-one printer. (That way we know that material the printer works properly.

  In the meantime, please see this message, How to connect a USB-wireless printer to a wireless network without PC, by @jason_h. If you do not have an iPad as indicated in this message, using your computer, open a web browser (for example, Firefox, Google Chrome etc.) and put the IP mentioned in this post in the address bar of the web browser. Then continue with the instructions in this post.

  Otherwise, if this post does not help to connect, I would very get a USB 2.0 printer cable at a local store. Once you have the cable, you can connect temporarily to your computer and convert a USB connection to a wireless connection, what could be easier.

  Hope this post will help and hope to hear from you soon!

• print from macbook on deskjet F4580 wireless printer?

  What should I do to get my Book Mac OS X 10.6.8 to print from macbook on printer deskjet F4580, use wifi?

  Hello

  The printer is currently connected to your wireless network?

  In order to connect the printer to your network wireless, temporary, connect the USB cable.

  Enter the Applications > Hewlett-Packard > peripheral utilities and follow the HP Setup Assistsnt. you will see an option to configure the wireless connection.

  If you can't find the Hewlett-Packard folder, you can download the full feature software below:

  http://FTP.HP.com/pub/softlib/software11/COL29757/Al-73899-2/DJ_AIO_06_F4500_USW_Full_Mac_WW_105.dmg

  Kind regards

  Shlomi

• Excellent signal, but cannot connect to the wireless network

  XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.

  Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.

• HP deskjet all-in-one 2545: Troubleshooting Wireless direct with HP2545 with printer all in one

  I want to use my printer wirelessly without router (via direct wireless), but there is no work, or he always says this printer is offline every time when I was trying to make my the HP2545 while one use by direct wireless.  IAM using a pc with windows 7 64 bit I have installed the latest software for 2545 all-in-one of the net to the PC already, connected via USB and in this case printed successfully. (it also works through classic wireless)   The printer appears as a device with wireless on the PC and I can log in, however, (with unplugged USB) when Iam printing, the printer shows as offline and work never reached the printer. But if I plug in the USB cable it will print. I already found in the bottom right corner my SSID of my printer, put the correct password and it writes me that priter is already connected but nevertheless the printer does not work, is always offline... I tried all the known methods (in classic seting place... by start-> all programs-> HP-> HP deskjet 2545 series-> setting up the printer and the software and tried to convert the USB to connect wireless) , but without any positive result... what iam doing wrong? why it does not work on my pc via direct wireless table? on my second laptop it I have win 7 32 bit and everything works great also through the direct wireless... it's very strange... Why this function works on my laptop but on my table pc not despite the fact that connected the printer in the lower right corner...

  Although no one responded to my problem, thank you when, I already solve the problem! It was such a success s bull and I didn't know... I had only just connected and linked to my home PC, my network card with my wireless card with the network address and ola which was the cause which has blocked my direct function wireless printer, now everything works well,!

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• 5740 OfficeJet All in One: 5740 printer OfficeJet connects but scanner is not on the wireless network.

  Hello

  I recently bought the above printer and the printer connected most of the time, the scanner becomes more reluctant on my wireless network.

  I just printed a document yet when I try to analyze only one or two seconds later I said it has not detected to scan. I don't know how the device connects - but because the printer connects OK probably is not a wireless connection / router issue?

  The only solution I found to this problem is to restart my system which is quite frustrating and not an acceptable response to long term. When I do this the scanner seems to operate normally, at least for a while.

  I installed all the software from the Web site, including the HP utility - yet I am also told that "computer scan can not be activated" because the software is not found - which is strange, because I installed all the software available.

  Any suggestions?

  Hey there @gggdfsdfsdaf!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions on the 5740 Officejet and its communication of scanning.  There may be a slight problem with the software.  I suggest you uninstall the HP software.  Once the software uninstalled I recommended to perform a "repair disk permissions" on your Mac.  A repair disk permissions is a utility built into the operating system Mac designed to detect and resolve problems or errors. After that permission to repair disc is finished, reboot your Mac computer and re-install the software.

  To uninstall the HP software, click: uninstall the HP software

  To perform a repair authorization disk click here: repair disk permissions

  To download the Officejet 5740 software, click here: 5740 Officejet full feature and driver software

  After the installation I recommend that you check the software updates on the Mac.  To search for software updates, click the icon "Apple" to the left and click on the "app store".  In the app store, you can click on the "updates" at the top of the window.  Updates install and Hp or a printer.  After the update, you must restart the computer.

  You can also launch scans of an application on the mac, called 'Image Capture'.  For Image Capture click "Spot Light" (magnifying glass) in the upper right of the Mac.  Image capture type and it should appear as one of the first options.  Open Image capture and on the left side of the window should display your scanner.  The scanner can be listed under 'shared '.  Select your scanner and you should have the options and settings on the right side for scanning.

  Please post back and let me know if this worked for you!