printer activation

have the printer HP 4500 series, error code 30 (printer not activated) Beware not of and reinstalled printer software. can print the test page, but cannot print from screen, printer displays printer ready software

Restore your system to an earlier date where he worked. Reinstall the driver.

You may have to reinstall programs you have recently installed.

Tech of

http://www.computerstar.ca/

Tags: Windows

Similar Questions

  • HP Photosmart B209a more: what printer active uses 364 cartridges?

    My HP Photosmart Plus B209a reports a phantom paper jam and I forgot to fix that.   If I replace this machine I want to use my big stock of 364 genuine cartridges, then should what active printer I buy?  Help please.

    Hey @Brambley,

    Welcome to the Forums of HP Support!

    I see you have a problem with a false paper jam in the printer Photosmart Plus B209a all-in-one. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve paper jam errors on your printer.

    If after following the above, you cannot clear the jam, the printer will need to be replaced. You can contact the HP Support by clicking this link and fill out the form below to see what are the options available to them. When you do so, they should be able to offer a model that uses the same cartridges, or they may be able to swap cartridges for you.

    Please let me know the results after following the above. If you are able to clear the jam or come up with a solution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • How does set a printer 'active' in LabVIEW?

    The method PrintPanel for a VI says that it will print to the printer 'current '.  How does set a that?

    On Windows, all applications start with the default printer and the user can change this to be the "current printer"

    but it's different in each application.

    LabVIEW does seem to have no way to set the current printer until it is needed?

    And why can't the method takes a name of the printer in option though?

    I think you're looking the printingefault printer property for the Application class.

  • Print directly from iPhone without internet via special Wi - Fi?

    Hello world.

    I want to print labels for shipping directly from the iPhone.

    I guess I need printer active AirPrint.

    My question is: did someone knows such printer which will also save me the need to buy a router wireless (Wi - Fi) because the printer itself creates ad-hoc or a direct wireless connection?

    Thank you very much!

    Canon offers a selection of printers that have this feature, their page can be found here. (Sorry, I live in Southeast Asia) They offer the AirPrint and functionality you described, which is not AirPrint. Personally, I use the MG7170 model. DISCLAIMER: I do not receive a financial reimbursement to promote all recommended features.

  • Pages and Numbers crash when print drivers Toshiba

    In my office, I have a black and White Copier 857 of Toshiba e-studio and a Toshiba 4555C color copier, who never gave me problems printing on the network from a PC or Mac before El Capitan. Since he joined some of the Mac (some MacBooks, some iMacs, liberation of the years from 2011 to 2015) to El Capitan (all versions up to and including 10.11.4), I met a strange behavior when you try to change printers in Pages or in number on all of these Macs (no problems with the PC, regardless of the version of Windows). The exact location is:

    -Open the Pages or numbers and starts with an existing document or a new document

    -Bring up the print dialog box

    -Change the printer active 857 c 4555 or vice versa

    -Pages/numbers instantly crashes with the following error report (I don't publish the complete stack trace unless someone finds it useful):

    Crashed thread: 0 dispatch queue: com.apple.main - wire

    Exception type: EXC_BAD_INSTRUCTION (SIGILL)

    Exception codes: 0000000000000001 0 x, 0 x 0000000000000000

    Note the exception: EXC_CORPSE_NOTIFY

    Request for clarification:

    Crashing on the exception:-[NSMenuItem supportedPPDOptionKeys]: unrecognized selector sent to instance 0x7ffa04cbe8d0

    Note that this happens only (so far in my tests) in Pages, Numbers and curiously, Google Chrome (but only if you use the dialog box print system). It does not occur in Keynote, Safari, TextEdit, or all the productivity applications from Microsoft, nor when printing test pages from the printers and scanners preferences window. It also does not occur when moving from one of the problems Toshibas completely different printers (HPs, brothers, Epsons), or vice versa - only between the Toshibas. I tried:

    -Delete the printer preferences

    -Configuration of the drivers of Toshiba to "pretend", that printers are different models

    -With the help of Hello, PPI or LPR to connect

    -Remove all equations in partial derivatives of Toshiba and SDPP/library and re - install the drivers from scratch

    -New and old drivers Toshiba

    -Ensure, Pages and Numbers are the latest versions: 5.6.1 (2562) and 3.6.1 (2566) respectively

    -Various updates of El Capitan

    -New installation of El Capitan

    No luck. Same behavior, no matter what machine or El Capitan version I try on. Unfortunately, I don't have other models Toshiba to test. I would be recognizing all thought - I understand that the answer could end up being 'complain to Toshiba of their pilots', but I thought it was worth a try here first. Thank you!

    I would say that you are looking for in a bug report. A all Pages, a copy of the numbers.

    In each, open the app, go to the menu of the application (Pages or numbers) and choose to produce (application name) return. Use the bug report category and give a detailed description of how to reproduce the results you've met. Repeat for other affected applications.

    Kind regards

    Barry

  • HP Office Jet Pro 8610: printer goes offline at rest - requires market power when the new document is pending

    Printer and all functions work fine.  However, lately I sent a doc to print who just sits in the queue.  When I look at the printer by clicking on the tray icon I sde is offline.  So I turn the printer off and back to get it on the network.

    I don't really have any options to change my home network and hope it is some of the printer which will avoid going offline like this, or a faster way so he can go online without turn off and on.

    That dot the 'A' and a passage of "T" by the first response:

    The printer model-

    HP Officejet 8610

    Detailed problem description-

    Printer goes offline without warning.

    New print job is in the queue showing the printer is offline.

    Must be able to market, leading to the resumption of the print job.

    Operating system on the computer (including the revision of the service pack)-

    Windows 8.1

    Method - USB, LAN, Wireless cable connection? -

    Wireless, same problem if DHCP or static 192.168.0.253

    Brand and model of router and modem? -

    BrightHouse Cable router/Modem: Arris, H/W version 6, Firmware 8.0.120

    Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

    None

    If wireless, when the problem occurs, which is blue wireless light on the printer, active, disabled or flashing? -

    WE

  • my HP envy 5330 takes forever to print, or not at all

    Hello

    I have a HP Envy 5530, which do not print most of the time. Sometimes it will print but often it will say: it is printing then leave after 10 minutes. Sometimes it will print a half page.

    I set up to connect to the router but have also tried a usb cable, but there is no difference

    Any ideas?

    Thank you

    Jono2

    Please provide the following information if anyone can help including:

    The printer model - done

    Complete and detailed problem description-

    Operating system on the computer (including the revision of the service pack)-

    Connection method - Direct wireless, wireless, wired LAN, USB? -

    Brand and model of router and modem? -

    Error messages - on the screen of the printer or computer, no matter what flashing light patterns? -

    Do you think the printer is going to sleep and can't wake up? -

    If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

    Say, download and run printing HP and Scan doctor, what - what?

    http://support.HP.com/us-en/document/c03286146

  • Want 5660: Printer cannot connect to the router

    All of a sudden the printer can no longer connect wireless to the router. Printer router ok may be defective

    Please provide the following information if anyone can help including:

    The printer model - done

    Operating system of the computer-

    Detailed - description of problem including all devices network (extensor, switches)

    Connection method - Direct wireless, wireless, wired LAN, USB? -

    Number of brand and model of router and modem? -

    Error messages - on the screen of the printer or computer, no matter what flashing light patterns? –

    The printer is connected directly to the wall outlet?  If this isn't the case, please explain how the power is connected.

    Do you think the printer is going to sleep and can't wake up? -

    If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

    Power off the printer and the router.  Power on the router and wait 3 minutes, power on the printer.  It connects to the router now?  What is the IP address of printers?

  • HP laserjet pro M1536dnf wireless configuration in order to use Air printing

    Since I am trying to print from my new Ipad Air, excuse my newbie questions for networking printing!

    What I know so far:

    1. I understand my printer HP laserjet pro M1536dnf is 'not' a WiFi printer.

    2 by HP support and Apple Support web sites, my printer HP laserjet pro M1536dnf is 'Air Print' active. I guess that a certain update must incorporated the Betacam Air Print!

    3. According to the web site of the HP Support, I have currently the latest firmware installed (20130815).

    Note: On my Config report, it shows the status for IPv4 and IPv6 as "network cable unplugged". I have the address IP Show as active.

    3. my home configuration has the internet cable from my modem cable to my router wireless Linkys E3200 via a coaxial cable. Between my router and my computer is connected through the Ethernet cable. My printer HP Laserjet 1536dnf printer is connected to my computer via a USB cable.

    Issues related to the:

    1. go to after I saw and read about on-line, is correct to say "I'll have to change my Ethernet cable from the router to the computer and change it to leave the router to the Ethernet port on the printer?"

    2. do I have to remove the USB from the printer to the computer?

    3. by removing the USB cable between the printer and the computer, how my computer would communicate to the printer to perform a print job? Unless, I suppose, I add another Ethernet cable between the router and the ethernet port on my computer!

    4 other advice, I might have missed?

    @RicharddR

    Thanks for your post on the forums of hp.com. Here are answers to your specific questions:

    1. you must have all your devices on the same cable modem network: computer, printer, mobile devices. Looks like your Setup is similar to mine. I have mine with the modem installation cable to my Cisco router that broadcast wireless signal. Then I have my devices on this router (computer, printer, mobile devices).

    2. If you use Airprint, you put your printer on a network or wireless. Since your printer is a model of dnf (D - duplex, n = network, f = fax), you must use a network cable and add it to your router. AirPrint is not supported via the USB port.

    3. If you remove the USB cable between the printer and the computer, you need to add your computer to the same network as your added to the printer. You can either do this via the ethernet cable or wireless depending on the capacities of the router and the computer. The important thing is that all the devices are on the same network.

    4. for other tips: make sure everything (computer, printer, router, mobile devices, etc.) are on the same network, otherwise you will not be able to print or have communication problems such as print jobs do not print.

    Good luck.

  • Printer detects problems

    I have an officejet pro 8500 a Win7 running. The printer will lose the connection with the computer. In this case, the power light will fade back. I can unplug the power to the printer, plug it in again and the printer will reconnect with the computer and prints fine - but it is only a temporary solution and won't last long, then light fades back and forth again. Have no idea how to solve this problem - I deleted the drivers, drivers reinstalled without success.

    The printer goes into mode 'sleep'.  Normal.  Read your manual on how to disable this if you want, and how to set
    Will auto power off to turn off.

    Please provide the following information if anyone can help including:

    The printer model - done

    Detailed problem description-

    Operating system on the computer (including the revision of the service pack)-

    Method - USB, LAN, Wireless cable connection? -

    Brand and model of router and modem? -

    Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

    If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -

  • I can print for Lotus, but not to e-mail, attachments or Excel. What could be the problem?

    I recently had a print spooler problem and used a HP Assistant that I downloaded.  Which seems to solve the problem when Lotus began to print again.  When I tried to print from Excel and my account error Email said printer active unavailable, but he listed.  Any ideas?

    Hello

    1. What is the model number of your printer?

    2. what operating system is installed on your computer?

    3. you get any error message?

    I suggest you to try the steps below and check if it helps.

    Method 1: If you have a problem with printing from Internet Explorer, and then try the steps from the link below, you cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/2409656

    Method 2: If the problem persists, then try the steps below.

    Printer in Windows problems.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Hope this information is useful.

  • HP Envy 4500: story of registered printer

    Is my HP Envy 4500 record (keep track of) my printing business (number of copies, BW or color, etc..?)  If so, is that the information available to me as the owner and main user?  How?

    I belong to instant ink program, but HP is not interested at all in telling me my printer activity - just when I need to send them more money.

    Hello

    Thank you for using the HP Forums

    You can actually print a printer status report where it will show you "print usage information" and other information.  It does not show you the number of pages BW/color but just the total number of pages printed.

    Generated the report:

    1. in the front panel of the printer, go to 'tools '.

    2. Select "Printer Status Report" to print.

    Check out the video :

    Print a Test Page - HP Envy 4500 e-all-in-one printer

    Hope that helps!

  • How to get the printer sent in mode online

    My printer is in line mode since I got back from vacation.  Cannot get online.  Could someone please help?

    Please provide the following information if anyone can help including:

    The printer model-

    Detailed problem description-

    Operating system on the computer (including the revision of the service pack)-

    Method - USB, LAN, Wireless cable connection? -

    Brand and model of router and modem? -

    Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

    If wireless, when the problem occurs, which is blue wireless light on the printer, active, disabled or flashing? –

    Power off the printer and the router. Power on the router and wait 3 minutes, power on the printer. It connects to the router now? You have a valid IP address?

  • Print to a printer

    Hello

    I enabled 'configuration report print' as 'apex Oracle listening Port.

    Created a simple reception report.  Under 'Attributes Print' active impression on 'yes '.  The report works well and I am able to download it in CSV format.  When I click on the link 'Print', it still generates output in PDF format (depending on configuration) or I can download it in CSV format.

    My question was to know how to print the report to a printer like the majority of printing applications.  I use apex 4.2.6.

    Thank you

    -Anand

    anand_gp wrote:

    Hello

    Adding CSS class for the model printable version (Explorer link below), I could able to print the page on a printer.

    https://atulley.WordPress.com/2007/05/17/return-and-print-links-on-printer-friendly-pages/

    However, I am not able to get rid of the messages at the top (highlighted in a red circle in the picture).  Is the name of the application in fact and message of welcome to connect the user.  How can we hide even the news during the 'Printable Version' view?

    It's quite simple using a print media style sheet.

    You must identify the CSS selectors (usually ID and classes) of the HTML page for the elements and areas that are not to be printed: a web Inspector such as that found in Safarior Firefox + Firebug combo is useful for this.

    We cannot provide detailed information on the selectors without a complete information about the APEX version, theme and the models used.

  • problems printing Adobe Reader XI

    Over the years, I was able to print a pdf file directly by pushing the button "print" on this issue. If I now push the "impression" on each pdf file button, a new window opens directly with a backup button and only the saved pdf file is printable. This s very annoying way. All the pdf files I used didn t have a keyword or password. Is there a problem in the settings in Adobe Reader yourself?

    It sounds like you need to print active file (Advanced on printing Panel button).

Maybe you are looking for

  • Document feeder disabling in order to use the flat bed scanner

    I would like to be able to use the portion of my printer for items too large or too large to fit in the document feeder. I have a Photosmart C309a with my Mac. I'm trying to do my job on the printer not through any software. This feature worked befor

  • UNRESOLVED: df800b2 8 '' Digital Photo Frame firmware issues

    Do not think that someone other than HP can help about this, because it requires updated firmware update for the frame! Third time to post is a charm - last one I clicked the button "Resolved?" and it enabled "Accepted Solution" and now I can't cance

  • noob need help with background__

    I play games online and I'm still getting kicked for Hi ping.thought that I would be closed a few things. 1 of these something on the Defender, was now when I start his shot and miss out on the weather that my background is rising on 32-bit or 16-bit

  • Connection to remote desktop using proxy and gateway desktop remotely?

    I have setup a gateway desktop remotely using Windows Server R2 2012 server. I use Remote Desktop gateway as an intermediary between to offer remote desktop session more than 443 because 3389 is blocked in several places of the customer. However, I e

  • Custom.XSS style not reflected in languages other than the U.S.

    Hi allIn order to conditionnaly of lines of color in a table, I did the following:In processRequest:For each OAMessageStyledTextBean line:OAMessageStyledTextBean AqlTopSegment1 = (OAMessageStyledTextBean) priceTable.findIndexedChildRecursive ("AqlTop