printer all-in-one PSC 1315: check the ink cartridge light flashes

Similar Questions

• Printer HP Officejet 6100; Win 7; Access the ink cartridges

  Printer HP Officejet 6100; Win 7;  If the ink cartridge access door is opened with the printer, the cartridge printheads do not change access.  No error reported.

  Well, couple of questions:

  First, they move with the door closed while printing, I want to say it actually prints, which would indicate that the transport is not stuck on the side? If it does not move, it may be blocked behind the paper or something inside the printer. It is not recommended to reach into the printer.

  Second, is there an indication (light/message) which shows the door is actually open? Otherwise, there is a tab inside the right side of the door near the label to ink cartridge number? It is located on the edge of the door, and goes into the printer indicating open or closed to the printer.

  If all this seems correct, try a hard reset on the printer. Powered on, unplug the power cord of the printer, wait at least 30 seconds, then plug the power supply cord. Turn on the printer and see if it will allow access to the cartridges.

• printer all in one psc 2210xi while trying to align the cartridge HP (Vista) "paper mismatch".

  I changed a cartridge and try to align the cartridge but keeps paper be ejected with message "paper mismatch" on the front panel of the printer.  Same paper and size I always use but I changed out, unplugged and reset the printer and made sure pc the printer settings are compatible with the paper type and size as well.  Still no luck.  I know that this printer is older but it was gently used

  In fact, I had already read the news you mentioned me and it did not apply to my situation of paper.  I was using standard letter size paper and had not changed type and size.  What I found useful is a blog that mentioned by changing the properties of the printer; printing preferences; type.  I got the paper type "automatic" and I changed to "plain paper" as the recommended blog.  After that, I was able to align the ink cartridges and print as usual.  I still have no idea what caused the problem in the first place since the previous setting was what I always used.  Thanks for your interest.

• ALL IN ONE C3180 - ERROR "FAILS THE NEXT CARTRIDGE: 3 COLORS.

  HELLO AND I HOPE YOU ANSWER ME. I HAVE THIS PROBLEM FOR LIKE a YEAR, I BOUGHT a PRINTER ALL IN ONE C3180 3 YEARS ago AND all of a SUDDEN WHEN I TRIED to PRINT a MESSAGE SURGIT IN SAYING ' THE NEXT FAILED of CARTRIDGE: 3 COLORS ' THE PROBLEM IS that HE OWNED a COLOR CARTRIDGE inside AND he WAS NEW AND ORIGINAL. I THOUGHT MAYBE IT WAS EMPTY, I BOUGHT A NEW ONE AND A PLACE. BUT I LOST MY MONEY BUY A NEW ONE, AND WHEN I PUT IT, I HAD THE SAME PROBLEM. THE INK IS FLASHING. AND I CAN'T PRINT IN BLACK OR BECAUSE IT IS SAID THAT HE BOTH CARTRIDGES ON. ANY IDEA? BECAUSE, I HAVE REINSTALLED THE DRIVER, AND NOTHING HAPPENED. I BOUGHT 2 MORE BECAUSE I THOUGHT HAS A PROBLEM OF INK, BUT NOTHING HAPPENED. I CAN'T USE IT AT ALL AND I HAVE BLACK AND FULL COLOR CARTRIDGES. Thank you.

  I HAVE WINDOWS XP BUT I TRIED WITH VISTA ALSO AND NOTHING happened.

  I called HP because I was really frustrated and tired and have no guarantee. I was told that this isn´t a cartridge problem, it is a technical problem of the printer itself. they have a sensor to detect each cartridge and that the sensor has failed. So I need to replace the part or just buy a new.

  hope this information helps someone else.

• all-in-one HP Deskjet 1512: remove ink cartridges

  Hello

  I've just set up my new printer, but the light of attention and two ink cartridge lights continue to Flash.  I can't figure out how to remove the cartridges, so I try to reinstall them.  I did exactly what the instructions said to do, but obviously done something wrong.  Help, please... Please, I am a real novice in all of this, go to A, B, C for me.  Thank you

  @Emerald4043 , welcome to the forums

  I saw your post on ink cartridge problems you're having with your new 1512 Deskjet and wanted to answer with my ideas for you.

  Even if you can not see this specific error message, try the steps outlined in this guide. I have crossed their me and think that images and steps should be useful:

  An "Incompatible cartridge or"Missing cartridge"Error Message is displayed for HP Deskjet 1510, 2540 Deskjet, HP Deskjet Ink Advantage 1510 and Deskjet Ink Advantage 2540 all-in-One Series Printer"

  If you find that the guide did not help and the problem persists, try to give us a call to see what are your printer options:

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great Tuesday

• I have a printer all-in-One of 4315. The HP screen comes up when the paper loaded.

  When I try to scan a document into my 4315 all-in-one printer, the HP page no longer appear.

  Hi billt69,

  Thanks for the reply.  We need to restart your digital imaging monitor service.  The service may have been disabled during troubleshooting for the virus.  Please see the steps below. Let me know how it goes.

  1. open MSConfig (run-MSConfig(type this in box)-entry)

  2. click on the Startup tab

  3 How to start find HP digital imaging - this may vary slightly due to the age of the software can tell digital imaging HP cue or something similar.  Make sure that under manufacturer Hewlett-Packard is listed

  4. next to HP digital imaging select (check) the box of

  5. click on apply

  6. click on ok

  7. it should ask a reboot

  or activate the normal if selective startup is selected-NOTE: this will start all programs in normal startup, some may be unnecessary

  1. open MSConfig

  2. under the general tab

  3. Select normal startup

  4. click on apply

  5. click on ok

  6. it should ask a reboot

  After restarting, try to scan

  I hope this helps!

• HP All - In - One psc 1315 Series

  My HP psc 1315 all-in-one series shows no ink levels - using Windows 7

  Hey there NanaViv,

  Are you able to see the ink levels in the HP Solution Center?

• 2540 HP all-in-one: how to check the level of ink with windows 10

  Well well, after 7 years using windows XP pro and my various printers HP over the years, I've always been able to instantly use my HP printer on the screen to see the ink level... I would go to programs... Find (printer todays) 2540 HP... Then click the icon to see my ink level...

  This is not the case with my windows installed 10...  I can print ok, but where is the Maintenance factor?  to clean the heads or see the ink level?

  I suggest that you remove all HP 2540 programs and then re-install thesoftware WIN 10 full.  Bwtween your WIn 8.1 and upgrade an error happened.

• Reference Dell V313w to printer all in one. Scanning documents record a new GB Flash Drive.

  Notice: part missing... directed to OCR on the printer CD, found the part. Must be an administrator to install, restarted in Administrator Mode. Try to install ask password for Windows, gave the password, it was wrong. Brain storm to change password, can't do that, need to change to new password old password. Where can I find the old password?  Another question: at the moment all the analyses and printer made a partial closing down. The power light does not turn off, but nothing works.  How to fix this?  I uninstalled and reinstalled and the printer is set as default, as said to do.

  Thank you for your help.

  AHarris343,

  Not knowing the brand and model of your computer and the operating system is not very useful.

  You can try...

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Uninstall the printer, start, Control Panel, programs and features (Add/Remove Programs) Dell V313 printer, uninstall.

  Restart your computer.

  With online computer, insert the floppy disk to the printer and install the printer. Because the printer is already installed, you can select additional computer, and follow the instructions. This should install it the printer and OCR program.

  Rick

• Photosmart HP 7510 - can't find the option to check the ink cartridge levels

  I used my HP Photosmart 7510 for about 3 years on my Windows 7 computer. In the past when I clicked on the icon of the printer, it would bring a window that allowed me to select what I wanted to do with the printer.  Analyze, check the properties, buy supplies and check ink cartridge levels, etc.  I always get a window but have lost some of the options. Unfortunately I don't remember what that all of my choices was previously, but the attached image shows the choices I get now.

  There was at least two other choices that included things like ink levels scan, audit, shopping.  I don't know what happened to make me lose these options.

  Hello

  Try to start the printer FRONT of the computer. The menu now has small change, ink levels are always on top. You can update its software (Oct 2012) by using the following package:

  http://ftp.HP.com/pub/softlib/software12/COL39677/MP-108855-3/PS7510_1315.exe

  Kind regards.

• My hp C309g printer range fails to align. just changed the ink cartridges. Works on Windows 7.

  has a great. My son worked hard a yuear there to get this printer working... He changed the cartridges of ink a couble of day and now it is not printing.  We tried to realign the heads but it come as "Failed" to align on the screen... Please any suggestions.

  Ok.  Once remove you / reinstall the print head, try to clean the printheads via the printer software.

  If it does not, the new print heads are about $95 or you can taste (unofficial) cleaning procedures listed on these forums.  Search for them.

• HP C7280 printer all-in-one: how to stop the software installation on C7280 printer, running for 6 hours

  I completed the installation of the C7280 all in software and it got to the configuration of the printer.  I used the wizard on the printer wireless to locate the wireless on the laptop, but when I tried to search for the printer on the laptop he couldn't find it.  Tried to save because it wouldn't let me move forward on the configuration and it inadvertenly started installation, but this time it will not stop install (6hrs) how can I stop installation and save my previous install

  Thanks for the reply, I have already done 4 uninstall yesterday 7z file level and renamed the file 7z in what has been shown as lacking in the original installation failed.  I was trying to see if I could save the first successful installation after all of the problems.  So, yesterday I did basically what you said and the software is installed and this time the printer has been detected and it works fine now.  Thank you

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk

• Printer all-in-one HP 5610: 5610 all-in-One prints blank page instead of print job

  When you send a print job, I get an empty page instead. I have:

  • Check the ink cartridges
  • Checked the connecction
  • Reinstalled the drivers
  • Don't have a full system reinstall to a date before the start of the problem

  None of the above works. I even went to a photo that I printed and tried to reprint - no luck.

  At the end of the roll...

  Thank you.

  Greg

  Hi Gregory_Mi,

  Thank you for your answer!

  I recommend to use our HP print and Scan Doctorand let me know what happens!

  If this does not resolve the problem, consider replacing ink cartridges refilled with genuine HP ink cartridges. This way, we will know if the problem is with the cartridges themselves.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Keep me posted!

• implementation of the ink cartridges will not be installed

  I recently bought the hp photosmart 5520 e printer - all - in - one

  When I turn on the camera, I get this problem:

  jam of transport
  Please remove all packaging from the inside of the printer, then press ok to continue

  I have removed all the packaging from what I see! If I press ok

  Then I receive this problem:

  Check the ink cartridges
  the following cartridges appear to be missing
  align the ink cartridges into the slots

  They are certainly in their slots correctly... I tried to get out them and re - insert, looking for additional packages left on them, turn on/off, clean the contacts, the printer and they still do not work!

  I'm sure that it will not need a service like suggests growth hurt here as its only 24 hours old!

  can anyone suggest anything else?

  Hi, I would suggest definitely contact the HP support by phone for this. Can you please let us know how you get on?

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Thank you

  Ciara