Printer asking to replace Toner

I replaced the toner, but always ask to replace toner printer

[Moved from comments]

It would be useful that come you into contact with brother Support concerning the problem of the printer.

https://secure6.brother.co.jp/BSC/public/ContactFrom.aspx?cus=45&Dept=IDC

Seems to be a hardware problem in the printer.

Tags: Windows

Similar Questions

  • Just Ask has replaced my page of Firefox. I have firefox wany back, Help!

    Ask Ask has replaced my firefox browser page and appears when I open my Firefox browser. How to bring back my Firefox browser page?

    If you do not see the page when you start Firefox, click the home button or open a new window, you can restore the default parameter like this:

    Click the menu button and choose Options.
    Select the general Panel.
    In the Startup box, click on restore by default.

    Close the topic: preferences page. Any changes that you have made is automatically saved.

  • I can't activate the web services, printer asking proxy address, ISP says no proxy

    I want to print from the ipad, iphone etc. with wireless turned on and connected. Try to activate the printer asking proxy that my ISP says that there is no proxy, web services, help with what I can do. I bought it only so that I can print from my ipad, the retailer does not know how to put in place, help please if you can

    There is another option to put in a custom DNS server. The integrated Web server for this model may be slightly different, but the following steps apply for all HP printers.

    What you want to do is to collect the IP address of the printer, you can do this by pressing the icon on the screen wireless and you will have to go to display settings after. Take this ip address and put it in the address bar of your web browser as a Web page. From there, go to the tab network along the top of this page, then you should have an option of ipv4 on the left side under wireless (or wired) If you are using ethernet. Here, you can set a manual IP address and a DNS Server Manual. Configure the DNS server to manual and put as a main 8.8.8.8 and 8.8.4.4 as secondary.

    These measures will have the printer through the servers DNS googles, which does not seem to solve this problem, most of the time. The main cause is that your ISP DNS servers may not have servers of web services in their system, so when it goes to connect it times out and gives you the message from proxy.

  • printer says to replace the ink cartridge, even though it is new

    Hello!

    Could really use some help with my printer. I recently bought new ink cartridges and I replaced the "old", but then my printer started to show on the compensation carriage jam error messages, even though it was clear and since then, he has constantly shown this error message on ink. He wants me to replace an empty ink cartridge to continue printing, it won't work otherwise.

    Ink, that I placed in the printer is totally new and authentic, but there is no answer, he displays the same message to two ink cartridges, which makes me realize that it of not really discern who is new or empty.

    If I remove them both, it tells me that there is an empty ink or damaged.

    I tried the reset of the printer, stop it down and turn, but the same message is displayed immediately. The light next to the screen flashes all the time.

    When I replaced the old cartridges I did not process the printer, I replaced them all first and then let him treat. Maybe it was wrong to do so?

    Any help is appreciated!

    It seems to be a problem with either the hardware of the printer or the replacement cartridge. If it is the cartridge, it should be covered by warranty (if it's authentic HP) given that you bought at just. Now, I think that your best shot would be to contact HP Technical Support to see all the other possibilities for you.

    The only other option would be to try an another new cartridge replacement for rule in or out the cartridge at fault.

    If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  • HP laserjet p1006: does not print after changing the toner

    I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

    Hi @cindycb,

    Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Make sure all the orange, packaging material is to remove the toner.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

    Open and close the cover five times quickly. It should print a page with black lines on it.

    You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

    You use Genuine HP Toner?

    Please let me know the result and if there is anything else I can help you. Thank you.

  • Samsung ML2525W printer does not print, the Red toner light stays on. Replace toner, no change.

    My Samsung Laser printer is less than a year.  I rarely use it.  The red light by the symbol of the triangle (cartridge toner according to manual) came and I was no longer able to print.  I have replaced the toner with a new one cartridge, printer and USB for PC connection and turn it back on about two or three times.  No change.  I even opened a 2nd (new) toner cartridge and replaced thinking one of my 2 new ink cartridges could be a dud.  However, still no printing and the red light stays on.  Any suggestions?

    Hello

    I see that you mentioned that the printer is less than a year, so I would recommend that you contact the manufacturer of the printer to help. The issue seems to be with the material.

  • My 7250 Photosmart all-in-one, will not be printed. He keeps asking to replace the blue ink cartridge lite.

    How can I get around the error message that doesn't work I would like to print?

    jason_h wrote:
    The Photosmart 7250 requires that all cartridges are available to be able to print. It is built into the unit to stop damage to the print head by preventing the ink to dry in the ports.

    If the machine gives an error that a cartridge is low and needs to be changed, then it should be changed to resume printing. For more information on depleted of ink cartridges in the Photosmart 7250 see the link here.
    I replaced the bad blue cart. get the right one tomorrow - more to follow. Thank you

    jason_h wrote:
    The Photosmart 7250 requires that all cartridges are available to be able to print. It is built into the unit to stop damage to the print head by preventing the ink to dry in the ports.

    If the machine gives an error that a cartridge is low and needs to be changed, then it should be changed to resume printing. For more information on depleted of ink cartridges in the Photosmart 7250 see the link here.

  • P1102w: Buy a new printer or the more expensive replacement toner cartridge?

    My P1102W printer cartridge is empty.  Can I buy the printer brand new for $15 and less than just buying a replacement cartridge.

    I see the replacement cartridge is capable of 1 600 pages, but can't find anything that describes the ability of the cartridge in stock.

    Why should I buy a cartridge replacement on this basis?  The replacement cartridge have more ink and print to that effect more pages than the cartridge that comes with the printer?

    Thank you

    JASPERADO wrote:

    ....   The replacement cartridge have more ink and print to that effect more pages than the cartridge that comes with the printer?

    Thank you

    Hello

    Normally Yes, cartridges that come with the printers (Laser and ink jet, all suppliers) have fewer inks/tonners - in many cases only around 50%.

    Kind regards.

  • Printer does not print with ink replacement

    Hi all I bought the replacement of ink for Epson stylus D92 I changed the cartridge which showed empty now it will not print

    Hi all I bought the replacement of ink for Epson stylus D92 I changed the cartridge which showed empty now it will not print

    Hello

    You should ask this question, support of Epson.

    Epson product support:

    http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

    Concerning

  • How can I use HP 2605DN printer black when color toner cartridges are empty?

    Is there a way I can use my 2605DN strictly as a printer laser black when all or part of the color toner cartridges are empty?  I like the quality of the HP 2605DN and works 99% of my black print.  Thanks for your help.  John O.

    You must change the option replace supplies of "stop out" to "ignore the.

    Go to the printer and use the buttons to select as follows:

    the system configuration->-> supplies to replace print quality

    Change to "stop out" to "ignore the.

  • Will not print black after replacing the black ink tank

    After replacing the black ink tank, the printer does not print black data (text or graphic).  I ran printing HP and scan doctor utility and printed assessment page.  The text is printed in a pale blue color. Gray scale apperas block (far right) to have no black content and has a hint of cyan.

    Printer:

    HP Officejet 6000 E609n

    Thanks in advance for any help

    OK because that is a thing of warranty which may be worth dip the printhead as described below...

    (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
    (2) remove all ink cartridges, then remove the print head Assembly.
    (3) gently put the printhead nozzles down in water and soak for 5 minutes.
    (4) remove the print head and gently dry the electrical contacts.
    (5) replace the print head in the printer and then reinstall the ink cartridges.

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

  • Color Laser Jet MFP M277dw Pro: Printer ask a password?

    When I try to access my screen settings touch printer it asks a password (not the past already tried wireless network).  I do not remember a definition, but if I were to set to the top I forgot and to know how to find or how to reset.  Thanks in advance for the help!

    Hey @ssullivan,

    Welcome to the HP forums! I hope you enjoy your stay here.

    I understand that you have a password on your Laserjet M277. To move only the printer will probably need to have a factory reset done on this. To do this, you need to contact HP support. You can contact HP support by clicking here and filling out the form below.

    I hope that you are able to remove this password set and I hope you have a nice day!

    If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

    If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

  • Windows media player in the browser asking to replace the html file each time

    Hi Alll,

    I have a case in which I run a WMP in a browser using ActiveX container, the problem I am facing is on each race its asking me to replace the existing html code in the file in the folder, is there a way to get rid of it, I dnt want to click on replace every time. Y at - it an easy way to do it.

    Please let me know.

    Ankit

    Thanks, this was very helpful

    smercurio_fc wrote:

    The dialog box is caused by the characters to write VI file you are using. If the file already exists, you will be asked if you want to replace it. Instead of using these screws, simply use text file read and write functions of text files that are in the range of the file IO.

    Your code has another question: your use of the constant current path of VI. See why my executable does not work when you use the constant path of the current VI?

    smercurio_fc wrote:

    The dialog box is caused by the characters to write VI file you are using. If the file already exists, you will be asked if you want to replace it. Instead of using these screws, simply use text file read and write functions of text files that are in the range of the file IO.

    Your code has another question: your use of the constant current path of VI. See why my executable does not work when you use the constant path of the current VI?

  • P2055 printer: how to find the number of pages printed on hp2055 a toner cartridge

    I would like to know where to find the number of pages printed on my toner cartride existing.

    Hello

    Click the Configuration button and select reports, and then select status supplies.

    Expiration report include the number of pages printed and about remaining for the specific Toner Cartridge.

    Shlomi

  • The documents don't print well after replacing the ink cartridge

    Original title: HP 6980 printer

    I just replaced the ink in my HP 6980 printer; now all my documents are dirty printing

    Hi, Annette.

    Manually clean the cartridges

    Scroll down to "remove the duplexer.  Clean the rollers alike.

    5 easy steps to clean inkjet printer

    Print quality problems

Maybe you are looking for

  • Satellite P300-1EU - msahci.sys missing for Vista

    I have a problem with the Satellite P300-1EU, Vista not started because he wanted msahci.sys file.I have no restore DVD. You have a solution for this problem? Cordially Rb

  • Satellite won't start

    When I go to turn on the laptop, it will rough the Toshiba, the graphics windows startup shows while he holds for several minutes. So if flashes some long message very fast (not enough time to read). Then after he cancels the boot Toshiba and this he

  • Updates does not. Error = 0 x 80248007

    I have XP Home Edition as my o/s Tried dozens of times to get updates for xp sp3, but the analysis is never ending.Error code 0 x 802548007 get every time. Cannot find a solution anywhere.Any help would be appreciated.Thanks in advance

  • install windows xp

    I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message.  one of the components that windows needs to continue Setup could not be installed. Manifest Parse Error: an invalid character was found in te

  • some contacts do not come to the top trying to transmit to...

    IM currently having a problem with my contacts.  most of the time when I start to type in a contact or a number in the TO: line my contacts will come and I can choose who I want to.   but for some reason any other not at all even when I type his name